imgalt

GOST 19681-83

ГОСТ 19681-83

Water mixing and distribution accessories for sanitary and laboratory applications. General technical requirements

Арматура санитарно-техническая и лабораторная водоразборная. Общие технические условия

Status: Not effective - Superseded. Decree of the Ministry of Construction of Russia of October 09, 1995, No. 18-92; BST 12-95; IUS 1-1996

The standard applies to water fittings (mixers, taps) for cold and hot water at an operating pressure of Py up to 0.63 MPa (approximately 6 kgf / cm2) and temperatures up to 75 degrees. C, designed for sanitary-technical devices installed in residential, public and industrial buildings, as well as on water fittings for cold water in hot water with the same parameters, installed in laboratories for various purposes

Стандарт распространяется на водоразборную арматуру (смесигели, краны) для холодной и горячей воды при рабочем давлении Рy до 0,63 МПа (приблизительно 6 кгс/см2) и температуре до 75 град. С, предназначенную для санитарно-технических приборов, устанавливаемых в жилых, общественных и производственных зданиях, а также на водоразборную арматуру для холодной в горячей воды с такими же параметрами, устанавливаемую в лабораториях различного назначения

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of the Council of Ministers of the USSR for Construction, 1/21/1983

SKU: RUSS74768


Price: imgalt
imgalt

The Product is Contained in the Following Classifiers:

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.140 Installations in buildings » 91.140.70 Sanitary equipment »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.140 Installations in buildings » 91.140.70 Plumbing equipment »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh2 Sanitary, engineering and fire fighting equipment for buildings » Zh21 Water supply and sewerage »

National Standards for OKSTU » SANITARY EQUIPMENT (EXCEPT VENTILATION AND AIR CONDITIONING EQUIPMENT), LOCKING AND FIXING PRODUCTS » Sanitary fittings and fittings »


The Document is Replaced With:

GOST 19681-94: Sanitary technical water mixing and distributing accessories. General specifications

As a Replacement Of:

GOST 19681-74: Water mixing and distribution accessories for sanitary and laboratory applications. General technical requirements

The Document References:

GOST 1.9-67: State System of Standardization. State Quality Mark. Form, dimensions and application rules

GOST 1020-77: Cast brass ingots. Specifications

GOST 13516-72: Corrugated cardboard boxes for canned food, preserves and food liquids. Specifications

GOST 13536-68: Round thread for sanitary fittings. Profile, basic dimensions, tolerances

GOST 14192-77: Marking of cargoes

GOST 14613-83: Fibreboard. Specifications

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types

GOST 15834-77: Wire from beryllium bronze

GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits

GOST 16337-77: High-pressure polyethylene. Specifications

GOST 17711-80: Cast copper-zinc alloys (brass)

GOST 18319-83: Corrugated board boxes for meat mincers. Specifications

GOST 18617-73: Wooden cases for hardware

GOST 18829-73: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications

GOST 20836-75: Technical leather. Specifications

GOST 21929-76: Transportation of goods in packages. General requirements

GOST 2208-75: Radiator bands of general purpose

GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 26358-84: Pig iron castings

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2991-76: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 3560-73: Sealing tepe

GOST 481-80: Compressed asbestos fibre sheets and gaskets from it. Specifications

GOST 494-76: Pipes of brass

GOST 5221-77: Tin-zinc bronze wire

GOST 5222-72: Silicon-manganese bronze wire

GOST 5244-79: Wood chips

GOST 5362-78: Brass ribbons. Specifications

GOST 5496-78: Rubber technical tubes. Specifications

GOST 613-79: Tin foundry bronzes. Grades

GOST 617-72: Copper pipes. Specification

GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread

GOST 6659-83: Water-resistant upholstery cardboard

GOST 8273-75: Packing paper

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols

GOST 9078-84: Flat pallets

GOST 9142-77: Boxes of corrugated board. General specifications

GOST 931-78: Brass sheets and strips. Specifications

GOST 9347-74: Board for gaskets and gaskets cut of it. Specifications

GOST 9387-81: Ceramic parts for sanitary technical ware and fittings. Specification

GOST 9484-81: Single trapezoidal thread. Profile. Basic dimensions

GOST 9833-73: Rubber toroidal sealing rings for hydraulic and pneumatic equipment. Construction and dimensions

The Document is Referenced By:

GOST 14709-69: Laboratory fittings for cold and hot water. Types and basic dimensions

GOST 19681-94: Sanitary technical water mixing and distributing accessories. General specifications

GOST 25809-83: Water supply mixing valves. Types and main dimensions

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Jet fuels
Language: English
Price: $49.00
imgalt
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English
Price: $98.48
imgalt
Chill moulds. Ventilation channels. Dimensions
Language: English
Price: $68.00
imgalt
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English
Price: $151.00
imgalt
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English
Price: $154.00
imgalt
Rails of types P38 and P42. Technical conditions
Language: English
Price: $109.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!