SP 12-103-2002
СП 12-103-2002
|
|
Tracks for ground rail cranes. Design, installation and operation
Пути наземные рельсовые крановые. Проектирование, устройство и эксплуатация
Status: Effective
The document applies to ground rail crane tracks of tower and jib cranes on a rail track device with a wheel load on the rail up to 325 kN. This document establishes requirements for the design, installation and safe operation of crane tracks, as well as to ensure safety when operating cranes on crane tracks.
Документ распространяется на наземные рельсовые крановые пути башенных и стреловых кранов на рельсовом ходовом устройстве с нагрузкой колеса на рельс до 325 кН. Настоящий документ устанавливает требования к проектированию, устройству и безопасной эксплуатации крановых путей, а также по обеспечению безопасности при эксплуатации кранов на крановых путях
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
2/27/2003
SKU: RUSS84004
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
1. Organizational and methodological regulatory documents »
k.12 Production »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
53.020.20 Cranes »
The Document References:
GOST 10528-90: Geodetic levels
GOST 10529-96: General specifications
GOST 11530-93: Rail joint bolts. Specifications
GOST 11532-93: Nuts for rail joints. Specifications
GOST 13556-91: Building tower pillars building tower pillars
GOST 16016-79: Bolts and screw-nuts for rail track crossing
GOST 16017-79: Inserted bolts for rail track fastenings.
GOST 16018-79: Nuts for clamp and inserted bolts of rail track fastenings
GOST 16210-77: Railway rails type P75. Design and dimensions
GOST 166-89: Vernier callipers. Specifications
GOST 19115-91: Railway lock washers. Specifications
GOST 19127-73: Double-headed fish plates for P43 rails. Design and dimensions
GOST 19128-73: Double-headed fish plates for P50 rails. Design and dimensions
GOST 19912-2001: Soils. Field test methods by static and dynamic sounding
GOST 22733-2002: Soils. Laboratory method for determination of maximum density.
GOST 22733-77: Soils. A laboratory method for determining maximum density
GOST 23407-78: Fencings for building sites. Specifications
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5180-84: Soils. Laboratory methods for determination
GOST 5812-82: Tie-cotters for broad gage railway
GOST 7056-77: The plates of spike fastening for type Р43 rails. Construction and dimensions
GOST 7173-54: Railway rails type Р43 for industrial conveyance and hoisting lines. Construction and dimensions
GOST 7174-75: Railway rails type Р50. Construction and dimensions
GOST 7392-2002: Crushed stone of solid rocks for railway ballast. Specifications
GOST 7392-85: Crushed natural stone for railway ballast. Specifications
GOST 7394-85: Gravel and sandy-gravel ballast for railway track. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 78-89: Wooden sleepers for railways of full gauge. Specifications
GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations
GOST 809-71: Track wood screws. Specifications
GOST 8161-75: Railway rails type Р65. Construction and dimensions
GOST 8193-73: Double headed fish plates for Р65, Р75 rails. Design and dimensions
GOST 8486-86: Coniferous sawn timber. Specifications
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 51248-99: Overland rail crane tracks. Principal specifications
PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.
RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines
RD 10-30-93: Standard Guidelines for Engineering and Technical Support Personnel Responsible for Maintaining Hoisting Machinery in Safe Operating Condition
RD 10-34-93: Standard manual for persons responsible for crane operations safety performance
RD 10-40-93: Standard manual for engineering and technical personnel to oversee safe operation of lifting equipment
SNiP 1.06.04-85: Provisions on Chief Engineer
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
SNiP 11-01-95: Instructions on the procedure of elaboration, coordination, approval, and composition of design documentation for construction of enterprises, buildings, and structures
SNiP 11-02-96: Engineering surveying for construction. fundamentals
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 3.01.03-84: Survey operations in construction
SNiP 3.02.01-87: Earthen structures, foundation and basis
SNiP 32-01-95: Railroads with 1520-mm Track. Construction Norms and Regulations
SP 32-104-98: Design of earthwork for railways with 1520 mm track
The Document is Referenced By:
MDS 12-42.2008: Norming of cost of technical inspection, maintenance, and repair of cranes, crane tracks, performance of design and construction works
MDS 12-44.2008: Recommendations for drafting work on the construction of a railway track tower crane
MDS 12-45.2008: Recommendations for drafting a project for the installation and operation of a tower crane
MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3
MDS 12-68.2015: Work Project. The device rail track tower crane
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
RD 10-112-1-04: Recommendations for expert examination of lifting machines. General provisions
RD 11-06-2007: Guidelines on development procedure for work execution program and schedule for hoisting machines and loading-unloading operations process chart.
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SP 120.13330.2012: Subway systems
SP 262.1325800.2016: Container yard and terminal devices in industrial and transport manufacture. Terms of design and construction
SP 316.1325800.2017: Container terminals. Regulations of projecting
SP 389.1326000.2018: Technical operation of seaport infrastructure facilities
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
