SP 41-101-95
СП 41-101-95
|
|
Designing heat supply stations (to the SNiP 2.04.07-86)
Проектирование тепловых пунктов (к СНиП 2.04.07-86)
Status: Effective
The rules apply to heat points with coolant parameters: hot water with a working pressure of up to 2.5 MPa and a temperature of up to 200 degrees Celsius, steam with a working pressure within the nominal pressure of Py up to 6.3 MPa and a temperature of up to 440 degrees Celsius. The rules apply to the design of heat points within the boundaries: from the shut-off valves of the heating network and utility water supply at the input to the heat point to the shut-off valves (inclusive) of local heating, ventilation, air conditioning, hot water supply and process consumers located in the heat point
Правила распространяются на тепловые пункты с параметрами теплоносителя: горячая вода с рабочим давлением до 2,5 МПа и температурой до 200 градусов Цельсия, пар с рабочим давлением в пределах условного давления Ру до 6,3 МПа и температурой до 440 градусов Цельсия. Правила распространяются на проектирование тепловых пунктов в границах: от запорной арматуры тепловой сети и хозяйственно-питьевого водопровода на вводе в тепловой пункт до запорной арматуры (включительно) местных систем отопления, вентиляции, кондиционирования воздуха, горячего водоснабжения и технологических потребителей, расположенной в помещении теплового пункта
Choose Language:
Format: Electronic (pdf/doc)
SKU: RUSS84097
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
k.41 Heat supply, heating, ventilation and air conditioning »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.7 For construction and housing and communal services »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.20 Commercial and industrial buildings »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.10 Central heating systems »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.025 Outdoor plumbing systems »
The Document References:
GOST 10704-91: Electrically welded steel line-weld lubes. Range
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 1215-79: Malleable iron castings
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 13078-81: Sodium glass liquid. Technical conditions
GOST 1412-85: Flakish graphite cast iron
GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15518-87: Lamellar heat exchangers
GOST 16860-88: Thermal deaerators. Types, basic parameters, acceptance, control methods
GOST 18698-79: Rubber delivery hoses with textile framework
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 21646-2003: Copper and brass tubes for heat-exchange apparatus. Specifications
GOST 24570-81: Safety valves of stream and hot-water boilers. Technical requirements
GOST 27590-2005: House-tube water-watered heat supply systems. General specifications
GOST 2761-84: Sources of centralized utility and drinking water supply Sanitary and technical requirements and selection rules
GOST 2874-82: Drinking water. Hygienic requirements and quality control
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 494-90: Pipes of brass
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8734-75: Seamless steel tubes cold deformed. Range
OST 108.271.105-76: Heat network water-steam heaters. Types, main data, design, dimensions and technical requirements.
PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP 2.02.04-88: Bases and foundations on the permafrost soils
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP II-12-77: Noise protection
TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions
TU 14-3-1698-2000: Steel electric-welded longitudinal pipes with a diameter of 1020, 1220 mm for gas and oil pipelines
TU 14-3-190-82: Seamless steel pipes for boiler plants and pipelines
TU 14-3-808-78: Spiral-welded electrowelded carbon steel pipes 20 for pipelines of nuclear power plants
The Document is Referenced By:
GOST R 57955-2017: Buildings and facilities for oil and gas producing industries. Design standards
GOST R 58367-2019: Arrangement of oil fields on land. Technological design
GOST R 70406-2022: Outdoor engineering networks. Installation and testing of external hot pipelines made of flexible nonmetallic pipes. Rules and control of work performance
GOST R 8.591-2002: State system for ensuring the uniformity of measurements. Two channel heat meters for water heat supply systems. Standardization of admitted error limits in measurements of the used thermal energy by users
KE-MR 01-2005: Guidelines for the development of optimal operating conditions for the operation of water heating systems for municipal heat supply for an unheated period
Manual: Manual for impulse and low consumption fire extinguishing systems
MDK 4-02.2001: Model Guidelines for Operation of Piped Heat Supply Networks of Public Piped Heat Supply Systems
MGSN 3.01-01: Residential buildings
MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)
MI 2640-2001: State system for ensuring uniformity of measurements. Mass (volume) amount of water consumed in circulating hot water supply systems for residential buildings. Measurement techniques. General provisions
NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry
NTP 10-12977-2000: Standards of technological design of enterprises of the alcoholic beverage industry
NTP-APK 1.20.11.001-04: Standards of technological design of enterprises of the yeast industry
RD 153-39.4-113-01: Standards for technological design of main pipelines
RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings
RMD 23-16-2019 St. Petersburg: Recommendations for energy efficiency of residential and public buildings
RMD 41-11-2012 Sankt-Peterburg: DESIGNING AND INSTALLATION OF HEAT SUPPLY SYSTEM IN SAINT-PETERSBURG
SNiP 31-06-2009: Public buildings and constructions
SO 34.04.181-2003: Organization of maintenance and repair of equipment, buildings and structures of power plants and networks
SP 107.13330.2012: Greenhouses and hotbeds
SP 118.13330.2011: Public buildings and works
SP 120.13330.2012: Subway systems
SP 124.13330.2012: Heating networks
SP 152.1325800.2018: Buildings of federal courts. Design rules
SP 152.13330.2012: Buildings of common jurisdiction courts. Rules of architectural design
SP 253.1325800.2016: High-rise buildings utilities
SP 285.1325800.2016: Football stadiums. Desing rules
SP 309.1325800.2017: Buildings of theaters and entertainment. Regulations of design
SP 31-106-2002: Design and construction of engineering systems of single-family residential houses
SP 32-105-2004: Subways
SP 334.1325800.2017: Apartment heating units in multicompartment buildings. Regulations of design
SP 395.1325800.2018: Transport hubs. Design rules
SP 417.1325800.2018: Buildings of railway stations. Design rules
SP 462.1325800.2019: Bus station buildings. Design rules
SP 462.1325800.2019: Bus station buildings. Design rules
SP 463.1325800.2019: Buildings of river and sea stations. Design rules
SP 463.1325800.2019: Buildings of river and sea stations. Design rules
SP 464.1325800.2019: Buildings of shopping and entertainment complexes. Design rules
SP 464.1325800.2019: Buildings of shopping and entertainment complexes. Design rules
SP 478.1325800.2019: Air terminal buildings and complexes. Design rules
SP 60.13330.2016: Heating, ventilation and air conditioning
TSN 23-308-00: Standards for the thermal engineering design of civil buildings taking into account energy conservation
TSN 31-315-99: Relail trade enterprises
TSN 31-329-2004: Retailers. Design Standards. Ivanovo region
TSN 31-330-2005: Treatment and prevention institutions in St. Petersburg
TSN 41-301-99: Autonomous heat generating stations with gas small-sized heating units. Ryazan Oblast
TSN JeO 98: Territorial building codes for energy supply of new and reconstructed buildings and structures using autonomous and centralized heat supply systems. Moscow region
Turkmenistan Guidelines for the development and application of standards: Guidelines for the development and application of standards for unavoidable losses and waste of materials in construction
VNP-10041-2002: Departmental norms and rules for creating coastal fishing enterprises. Treatment facilities
VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
