SP 42-102-2004
СП 42-102-2004
|
|
Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96
Проектирование и строительство газопроводов из металлических труб. Взамен СП 42-102-96
Status: Effective
It contains recommended provisions for the design and production technology of construction and installation works for the construction of external steel and copper internal gas pipelines, taking into account the peculiarities of their use in gas distribution systems, the choice of pipes and gas pipeline fittings depending on the pressure of the transported gas and operating conditions, calculations of external gas pipelines on strength and stability, protection of steel gas pipelines from electrochemical corrosion
Содержит рекомендуемые положения по проектированию и технологии производства строительно-монтажных работ при сооружении наружных стальных и медных внутренних газопроводов с учетом особенностей их применения в газораспределительных системах, по выбору труб и соединительных деталей газопроводов в зависимости от давления транспортируемого газа и условий эксплуатации, расчетам наружных газопроводов на прочность и устойчивость, защите стальных газопроводов от электрохимической коррозии
Choose Language:
Format: Electronic (pdf/doc)
Approved: Interdepartmental Coordination Council on the technical improvement of gas distribution systems and other utilities,
5/27/2004
SKU: RUSS84107
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
K.42 Gas supply »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Soldering »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Polymers »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Solders »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
2003.200.13 Pipelines and their components »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.40 Gas supply systems »
As a Replacement Of:
SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10704-91: Electrically welded steel line-weld lubes. Range
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 1460-81: Calcium carbide. Technical conditions
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 15836-79: Bitumen-rubber insulating mastic. Specifications
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17375-2001: Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design
GOST 17376-2001: Carbon and low-alloy steel butt-welding fittings. Tees. Design
GOST 17378-2001: Carbon and low-alloy steel butt-welding fittings. Reducers. Design
GOST 17379-2001: Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design
GOST 19249-73: Brazing and soldering joints. Main types and parameters
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19907-83: Dielectric fabrics made of glass. Twister complex threads. Specifications
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 20448-90: Liquefied hydrocarbon fuel gases for domestic use. Specifications
GOST 2246-70: Welding steel wire. Specifications
GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
GOST 24950-81: Bent branches and curved inserts for the turns of the linear parts of steel long distance pipe lines
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 380-94: Normal quality carbon steel
GOST 4543-71: Structural alloyed steel
GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications
GOST 5542-87: Natural fuel gases for industrial and domestic use
GOST 5583-78: Industrial and medical gaseous oxygen
GOST 617-90: Copper tubes. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 8050-85: Carbon dioxide,
GOST 859-78: Copper. Grades
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8734-75: Seamless steel tubes cold deformed. Range
GOST 8946-75: Ductile iron and steel fittings with parallel thread for pipelines. Union passage elbows. Basic dimensions
GOST 8947-75: Ductile iron and steel fittings with parallel thread for pipelines. Transition angles. Basic dimensions
GOST 8948-75: Ductile iron and steel fittings with parallel thread for pipelines. Straight tees. Basic dimensions
GOST 8949-75: Ductile iron and steel fittings with parallel thread for pipelines. Transition tees. Basic dimensions
GOST 8950-75: Ductile iron fittings with parallel thread for pipelines. Tees with two passages. Basic dimensions
GOST 8951-75: Ductile iron fittings with parallel thread for pipelines. Straight four-way junction pieces. Basic dimensions
GOST 8952-75: Ductile iron fittings with parallel thread for pipelines. Transition four-way junction pieces. Basic dimensions
GOST 8953-75: Ductile iron fittings with parallel thread for pipelines. Four-way junction pieces with two passages. Basic dimensions
GOST 8954-75: Ductile iron fittings with parallel thread for pipelines. Straight short sockets. Basic dimensions
GOST 8955-75: Ductile iron fittings with parallel thread for pipelines. Straight long sockets. Basic dimensions
GOST 8956-75: Ductile iron fittings with parallel thread for pipelines. Compensation sockets. Basic dimensions
GOST 8957-75: Ductile iron fittings with parallel thread for pipelines. Transition sockets. Basic dimensions
GOST 8959-75: Ductile iron fittings with parallel thread for pipelines. Connection nuts. Basic dimensions
GOST 8963-75: Ductile iron fittings with parallel thread for pipelines. Plugs. Basic dimensions
GOST 8966-75: Pipe steel connections with cylindrical thread for pipelines P=1,6 МPа. Straight sockets. Basic dimensions
GOST 8968-75: Pipe steel connections with cylindrical thread for pipelines P=1,6 МPа. Lock-nuts. Basic dimensions
GOST 8969-75: Pipe steel connections with cylindrical thread for pipelines P=1,6 МPа. Adapter couplings. Basic dimensions
GOST 9.602-89: Constructions, underground. General requirements for corrosion protection
GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications
GOST 9087-81: Welding melted fluxes
GOST 9238-83: Construction and rolling stock clearance diagrams for the USSR railways of 1520 (1524) mm gauge.
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
PB 12-529-03: Gas distribution and gas consumption system safety rules. Series 12. Revision 4.
RD 03-606-03: Instructions for visual and measuring control
RD 12-411-01: Guidelines for Operating Condition Diagnostics of Underground Steel Gas Lines
RD 153-39.4-091-01: Instructions for protection of urban underground pipelines from corrosion.
SNiP 11-02-96: Engineering surveying for construction. fundamentals
SNiP 2.01.09-91: Buildings and constructions in undermine territories and collapsible soils
SNiP 2.02.03-85: Pile foundations
SNiP 2.02.04-88: Bases and foundations on the permafrost soils
SNiP 2.04.12-86: Steel pipelines strength analysis
SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)
SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes
SP 42-101-96: Design and construction of polyethylene gas pipeline up to 300 mm in diameter
SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems
TU 14-3-721-78: Spiral welded steel pipes with a diameter of 820; 1020; 1220 mm for gas pipelines
The Document is Referenced By:
GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements
GOST R 54961-2012: Gas distribution systems. Consumers gas networks. General requirements to operation. Operational documentation
GOST R 54983-2012: Gas distribution systems. Natural gas distribution networks. General requirements for operation. Operational documentation
GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General
GOST R 58094-2018: Gas distribution systems. Gas distribution networks. Service life assessment in design of outdoor steel gas pipelines
GOST R 9.603-2021: Unified system of protection against corrosion and aging. Electrochemical protection. Electrically insulating inserts (couplings). General specifications
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
Order 5214: The list of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of application and execution of the Government of the Russian Federation of October 29, 2010 № 870 "On approval of technical regulations on the safety of gas distribution and gas consumption networks" (as amended on June 23, 2011) and implementation of conformity assessment
Order 5214: On approval of the List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations "On safety of gas distribution and gas consumption networks" approved by the Government of the Russian Federation on October 29, 2010 N 870 (as amended on April 22, 2013) (lost force from 01.04.2022 on the order of Rosstandart from 10.01.2022 N 3)
RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.
RMD 30-23-2014 Sankt-Peterburg: Guidance on the design of engineering preparation of the territory, engineering networks and improvement of residential and public business neighborhoods
SO 34.20.514-2005: Guidelines for the operation of the gas economy of thermal power plants
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.