OST 1 90113-86
ОСТ 1 90113-86
|
|
Pressed sections of aluminium alloys. Specifications.
Профили прессованные из алюминиевых сплавов. Технические условия.
Status: Effective
The standard applies to extruded profiles of aluminum alloys grades AMg5, AMg6, AB, DI, D16, D16ch, 1163, D19ch, D20, WADI, V95, V95pch, V95och, V96CPch, AK4-I, AK4-Ich, VD17, M40 and 1920 solid with a cross-sectional area of up to 200 cm2 and a diameter of a circumscribed circle up to 350 mm intended for use in the aviation industry and special branches of mechanical engineering
Стандарт распространяется на прессованные профили из алюминиевых сплавов марок АМг5, АМг6, АВ, ДI, Д16, Д16ч, 1163, Д19ч, Д20, ВАДI, В95, В95пч, В95оч, В96Цпч, АК4-I, АК4-Iч, ВД17, М40 и 1920 сплошные с площадью сечения до 200 см2 и диаметром описанной окружности до 350 мм предназначенные для применения в авиационной промышленности и специальных отраслях машиностроения
Choose Language:
Format: Electronic (pdf/doc)
Approved: MAP,
10/9/1987
SKU: RUSS94864
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Industry Standards and Specifications »
Industry standards »
The Document References:
GOST 10-88: Inside micrometers. Specifications
GOST 11739.10-90: Aluminium casting and wrought alloys. Method for determination of lithium
GOST 11739.11-82: Aluminium casting and deformable alloys. Methods for determination of magnesium
GOST 11739.12-82: Aluminium casting and deformable alloys. Methods for determination of manganese
GOST 11739.13-82: Aluminium casting and deformable alloys. Methods for determination of copper
GOST 11739.14-82: Aluminium casting and deformable alloys. Methods for determination of arsenic
GOST 11739.15-82: Aluminium casting and deformable alloys. Method for determination of sodium
GOST 11739.16-90: Aluminium casting and wrought alloys. Methods for determination of nickel
GOST 11739.17-90: Aluminium casting and wrought alloys. Methods for determination of tin
GOST 11739.18-90: Aluminium casting and wrought alloys. Method for determination of plumbum
GOST 11739.1-90: Aluminium casting and wrought alloys. Methods for determination of aluminium oxide
GOST 11739.19-90: Aluminium casting and wrought alloys. Methods for determination of antimony
GOST 11739.20-82: Aluminium casting and deformable alloys. Methods for determination of titanium
GOST 11739.21-90: Aluminium casting and wrought alloys. Methods for determination of chromium
GOST 11739.22-90: Aluminium casting and wrought alloys. Methods for determination of rare-earth elements and yttrium
GOST 11739.23-82: Aluminium casting and deformable alloys. Methods for determination of zirconium
GOST 11739.24-82: Aluminium casting and deformable alloys. Methods for determination of zinc
GOST 11739.2-90: Aluminium casting and wrought alloys. Methods for determination of boron
GOST 11739.3-82: Aluminium casting and deformable alloys. Methods for determination of beryllium
GOST 11739.4-90: Aluminium casting and wrought alloys. Methods for the determination of bismuth
GOST 11739.5-90: Aluminium casting and wrought alloys. Methods for determination of vanadium
GOST 11739.6-82: Aluminium casting and deformable alloys. Methods for determination of iron
GOST 11739.7-82: Aluminium casting and deformable alloys. Methods for determination of silicon
GOST 11739.8-90: Aluminium casting and wrought alloys. Method for determination of potassium
GOST 13516-86: Corrugated cardboard boxes for canned food, preserves and food liquids. Specifications
GOST 13576-81: Chain wheels for driving tooth chains. Method of calculation and construction of tooth form. Tolerances
GOST 13617-82: Bull angles extruded out of aluminium and aluminium alloys. Dimensions
GOST 13618-81: Extruded oblique-angled fitting angle-section shapes of aluminium and aluminium alloys. Dimensions
GOST 13619-81: Extruded rectangular zee-section shapes of aluminium and aluminium alloys. Dimensions
GOST 13620-90: Extruded rectangular normal zee-section shapes of aluminium and magnesium alloys. Dimensions
GOST 13621-90: Extruded rectangular equishelf H-beam section shapes of aluminium and magnesium alloys. Dimensions
GOST 13622-91: Extruded rectangular equishelf T-section shapes of aluminium and magnesium alloys. Dimensions
GOST 13623-90: Extruded rectangular equishelf channel-section shapes of aluminium and magnesium alloys. Dimensions
GOST 13624-90: Extruded rectangular flanged channel-section shapes of aluminium and magnesium alloys. Dimensions
GOST 13737-90: Extruded rectangular equishelf angle-section shapes of aluminium and magnesium alloys. Dimensions
GOST 13738-91: Extruded rectangular unequishelf angle-section shapes of aluminium and magnesium alloys. Dimensions
GOST 14192-77: Marking of cargoes
GOST 1497-84: Metals. Methods of tension test
GOST 166-89: Vernier callipers. Specifications
GOST 21132.0-75: Aluminium alloys. Method for determination of hydrogen content in molten metal
GOST 21132.1-81: Aluminium alloys. Measuring hydrogen content non-solid metal by solid extraction method
GOST 24047-80: Half-finished products out of non-ferrous metals and their alloys. Sampling for tensile test
GOST 24231-80: Non-ferrous metals and alloys. General requirements for sampling and sample preparation for chemical analysis
GOST 25086-87: Nonferrous metals and their alloys. General requirements for methods of analysis
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4381-87: Lever-type micrometers. General specifications
GOST 4784-74: Wrought aluminium and aluminium alloys. Grades
GOST 5009-82: Abrasive cloth. Specifications
GOST 6456-82: Abrasive paper
GOST 6507-90: Micrometers. Specifications
GOST 7502-89: Measuring metal tapes. Specifications
GOST 7727-81: Aluminium alloys. Methods of spectral analysis
GOST 882-75: Probes. Specification
GOST 9.011-79: Unified system of corrosion and ageing protection. Aluminium and aluminium alloys half-finished products. Temporary protection. General technical requirements
GOST 9012-59: Metals. Method of Brinell hardness measurement
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.