imgalt

OST 108.109.01-92

ОСТ 108.109.01-92

Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.

Заготовки корпусных деталей из коррозионностойких сталей аустенитного класса. Технические условия.

Status: Not defined by law. In connection with the entry into force of the Federal Law of December 27, 2002 N 184-ФЗ "On Technical Regulation"

The standard applies to blanks intended for the manufacture of body parts and equipment items of nuclear power plants, experimental and research nuclear reactors and other equipment. The standard establishes groups and basic technical requirements for manufacturing, methods for testing and controlling forgings, forged-rolled plates, sheets, long products from billets, sheet blanks and forgings from corrosion-resistant austenitic steel grades 08X18H10T and 12X18N10T with dimensions of forgings in thickness (diameter or wall) ) up to 450 mm; sheets, forged-rolled plates, blanks, obtained by stamping from a sheet - from 40 to 250 mm. The manufacturer may use blanks from a purchase sheet with a thickness of less than 40 mm.

Стандарт распространяется на заготовки, предназначенные для изготовления корпусных деталей и элементов оборудования атомных электростанций, опытных и исследовательских ядерных реакторов и другого оборудования. Стандарт устанавливает группы и основные технические требования к изготовлению, методы испытания и контроля поковок, ковано-катаных плит, листов, заготовок из сортового проката, листовых заготовок и штамповок из коррозионностойких сталей аустенитного класса марок 08Х18Н10Т и 12Х18Н10Т с размерами поковок по толщине (диаметру или стенке) до 450 мм; листов, ковано-катаных плит, заготовок, получаемых штамповкой из листа - от 40 до 250 мм. Изготовитель может применять заготовки из покупного листа толщиной менее 40 мм.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Heavy and Power Engineering Concern, 3/4/1992

SKU: RUSS96602

Price: $326.00

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Industry Standards and Specifications » Industry standards »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.30 Steels for working under pressure »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.85 Cast iron and steel forgings »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.85 Cast iron and steel forgings »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V03 Metal forming. Forgings »

National Standards for OKSTU » CAST IRON, FERRO ALLOYS, STEEL » Ingot forgings »

National Standards for OKSTU » PRODUCTS FOR GENERAL ENGINEERING APPLICATIONS » Forgings and stampings from ferrous metals »


As a Replacement Of:

OST 108.109.01-79: Hull blanks of corrosion-resistant austenitic steels. Technical conditions

The Document References:

GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12345-88: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12359-81: Steels carbon, alloyed and highalloyed. Methods for the determination of nitrogen

GOST 14192-77: Marking of cargoes

GOST 1497-84: Metals. Methods of tension test

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 18895-81: Steel. Method of photoelectric spectral analysis

GOST 19903-74: Hot-rolled steel sheets. Dimensions

GOST 2246-70: Welding steel wire. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance

GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 9651-84: Metals. Methods of tension tests at elevated temperatures

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions

PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules

PNAE G-7-014-89: Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)

PNAE G-7-018-89: Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection

The Document is Referenced By:

OST 24.125.08-89: Point joints for NTPP pipe lines. Design and dimensions.

OST 24.125.12-89: Adapters for nuclear thermal power plant pipelines. Design and dimensions.

OST 24.125.13-89: Forged Straight tees for pipes and nuclear power plants. Design and dimensions.

OST 24.125.14-89: forged Transitional Tees for NPP pipelines. Design and dimensions.

OST 24.125.15-89: Stamped straight Tees for pipelines of nuclear thermal power plant. Design and dimensions.

OST 24.125.16-89: Stamped reducing Tees for pipelines of nuclear thermal power plant. Design and dimensions.

OST 24.125.17-89: Stamped straight Tees with extended neck for pipelines of nuclear thermal power plant. Design and dimensions.

OST 24.125.18-89: Stamped reducing Tees with extended neck for pipelines of nuclear thermal power plant. Design and dimensions.

OST 24.125.20-89: Units with diaphragms for pipelines of nuclear thermal power plant. Design and dimensions.

OST 24.125.21-89: Bedplates for APP pipelines. Construction and dimensions.

OST 24.125.22-89: Lobes for pipelines of nuclear thermal power plant. Design and dimensions.

OST 24.125.24-89: Flanges of welded butt joint with ledge for NPP pipelines.Design and dimensions.

OST 24.125.25-89: Flanges of welded butt joint with depression for NPP pipelines. Design and dimensions.

OST 24.125.26-89: Flanges connecting ledge welded butt joint for NPP pipelines. Design and dimensions.

OST 95-29-72: Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!