Keyword: mechanical properties

Product Matches
Name Summary SKU
GOST 17066-94 Thin sheet rolled stock of high strength steel RUSS16651
GOST 3110-74 Steel spoke wire RUSS17194
GOST 30564-98 Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications RUSS17292
GOST 9124-85 Binding tin-coated steel wire RUSS17498
GOST 4728-96 Axle billets for the railway rolling stock of 1520 mm gauge RUSS18019
GOST 9941-81 Seamless cold- and warm-deformed tubes made from corrosion-resistant steel RUSS18077
GOST 5521-93 Shipbuilding rolled steel RUSS18086
GOST 398-96 Carbon steel tires for broad gauge railroads and subway rolling-stock RUSS18207
GOST R 52079-2003 Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications RUSS18576
GOST 4986-79 Cold-rolled band from corrosion-resistant and heat-resistant steel RUSS18649
GOST 4543-71 Structural alloyed steel RUSS19322
GOST 1577-93 Plate and broadband roll stock of construction fine steel. RUSS19400
GOST 3282-74 General-purpose low-carbon steel wire. Specifications RUSS20942
GOST 398-2010 Rough tyres for railway rolling stock. Specifications RUSS20944
GOST 535-2005 Common quality carbon steel bar and shaped sections. General specifications RUSS21416
GOST R 52628-2006 Nuts. Mechanical properties and test methods RUSS21422
GOST R ISO 898-1-2011 Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread RUSS21452
ST RK 1156-2002 Titanium alloys for transplantation in the health care. General specification KAZA22134
ST RK 1758-2008 Buffer plate suspension rods of passenger-car trucks, non-motor electric cars and refrigerator cars. Design, dimensions and specification KAZA22747
ST RK 1910-2009 Personal life-saving appliances designed to save untrained people from the height on external building sides. General technical requirements. Testing methods KAZA22904
ST RK 2772-2-2010 Mine hauling and mine hoist equipment. Part 1. Forged steel specification KAZA23652
ST RK EN 10025-6-2012 Hot-rolled products of structural steels. Part 1. Supply specification for flat products of structural steels of increased strength with a high yield point after hardening and release KAZA24031
ST RK GOST R 52079-2011 Steel weld pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specification KAZA24561
ST RK ISO 6259-1-2005 Thermoplastics pipes. Determination of tensile properties Part 1. General test method KAZA25804
ST RK ISO 6259-3-2005 Thermoplastics pipes. Determination of tensile properties Part 1. Polyolefin pipes KAZA25805
ST RK ISO 898-1-2012 Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and pins of specified strength class. Large and fine thread KAZA25980
DSTU 3760-98 Reinforcing bars for reinforced concrete structures. General specifications. UKRA32545
DSTU 4344:2004 Standard rails for railway tracks of full gauge. General specifications. UKRA33199
DSTU 4814:2007 Switch point rails of types OR 50 and OR 65. General specifications. UKRA33705
DSTU EN 10083-2:2008 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels UKRA34656
DSTU EN 10216-1:2006 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties UKRA34690
DSTU EN 10222-1:2005 Steel forgings for pressure purposes - Part 1: General requirements for open die forgings UKRA34700
DSTU EN 10222-3:2005 Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties UKRA34702
DSTU EN 10222-4:2005 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength UKRA34703
DSTU EN 13819-1:2005 Hearing protectors - Testing - Part 1: Physical test methods UKRA35143
DSTU EN 50363-4-2:2010 Insulating, sheathing and covering materials for low voltage energy cables. PVC covering compounds UKRA35614
DSTU EN 863-2001 Protective clothing - Mechanical properties - Test method: Puncture resistance UKRA35805
DSTU ENV 10080:2005 Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric UKRA35898
DSTU GOST 1535:2007 Copper rods. Specifications UKRA36641
DSTU ISO 683-17:2008 Heat-treated steels, alloy steels and free-cutting steels -- Part 17: Ball and roller bearing steels UKRA41470
DSTU ISO 8458-2:2007 Steel wire for mechanical springs -- Part 2: Patented cold-drawn non-alloy steel wire UKRA41810
DSTU ISO 898-6:2005 Mechanical properties of fasteners -- Part 6: Nuts with specified proof load values -- Fine pitch thread UKRA41919
DSTU ISO 898-7:2005 Mechanical properties of fasteners -- Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm UKRA41920
GOST 4752-2012 Cylinder copper wire. Specifications RUSS43696
GOST R IEC 851-3-94 Methods of test for winding wires. Mechanical properties RUSS44276
GOST 23137-78 Copper-zinc solders. Grades RUSS44853
GOST 21437-95 Zinc antifriction alloys. Marks, technical requirements and test methods RUSS48975
GOST R ISO 5832-4-2011 Implants for surgery. Metallic materials. Part 4. Cobalt-chromium-molybdenum casting alloy RUSS49220
GOST R ISO 5832-12-2009 Implants for surgery. Metallic materials. Part 12. Wrought cobalt-chromium-molybdenum alloy RUSS49308
GOST R ISO 5832-6-2010 Implants for surgery. Metallic materials Part 6. Wrought cobalt-nickel-chromium-molybdenum alloy RUSS49730
GOST R ISO 5832-7-2009 Implants for surgery. Metallic materials. Part 7. Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy RUSS49987
GOST R ISO 5832-5-2010 Implants for surgery. Metallic materials. Part 5. Wrought cobalt-nickel-chromium-tungsten-nickel alloy RUSS50215
GOST R ISO 5832-8-2010 Implants for surgery. Metallic materials. Part 8. Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy RUSS50232
GOST R 51395-99 ХК62М6Л alloy cast rods for artificial joints. Specifications RUSS50519
GOST R ISO 5838-1-2011 Implants for surgery. Spokes, skeletal pins and wires. Part 1. Material and mechanical requirements RUSS50855
GOST 31623-2012 XK62M6L alloy cast rods for artificial joints. Specifications RUSS51428
GOST R ISO 898-7-2009 Mechanical properties of fasteners. Part 7. Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm RUSS51507
GOST R ISO 5832-9-2009 Implants for surgery. Metallic materials. Part 9. Wrought high nitrogen stainless steel RUSS54633
GOST R 51396-99 Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications RUSS56228
GOST 30563-98 Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications RUSS56968
GOST R 51381-99 Corrosion-resistant cobalt-base alloy billets for orthopaedic stomatology. General specifications RUSS57377
GOST R 53405-2009 Copper cylinder wire. Specifications RUSS57590
GOST R ISO 5832-1-2010 Implants for surgery. Metallic materials. Part 1. Wrought stainless steel RUSS57860
GOST R ISO 8839-2009 Mechanical properties of fasteners - bolts, screws, studs and nuts made of non-ferrous metals RUSS57873
GOST R 52627-2006 Bolts, screws and studs. Mechanical properties and test methods RUSS58320
GOST 17232-99 Aluminium and aluminium alloys plates. Specifications RUSS58368
GOST 31244-2004 Non-destructive testing. Evaluation of material physical and mechanical properties for technical system elements by acoustic method. General requirements RUSS59014
GOST 31627-2012 Corrosion-resistant cobalt-base alloy billets for orthopedic stomatology. General specifications RUSS59049
GOST ISO 10326-1-2002 Vibration. Laboratory method for evaluating vehicle seat vibration. Part 1. Basic requirements RUSS59319
GOST ISO 13753-2002 Vibration and shock. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system RUSS59322
GOST R 51767-2001 Nickel-base alloy billets for orthopaedic dentistry. General specifications RUSS59438
GOST R 53866-2010 Crane rails. Specifications RUSS59611
GOST R 54150-2010 Wire from БрКМц3-1 bronze. Specifications RUSS59632
GOST R ISO 10326-1-99 Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Part 1. Basic requirements RUSS59856
GOST R ISO 13753-99 Mechanical vibration and shock. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system RUSS59886
GOST R ISO 898-5-2009 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses RUSS59972
GOST R 51394-99 Wrought stainless steel for surgical implants. Specifications RUSS60012
GOST 31624-2012 Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications RUSS60169
GOST 4728-2010 Axle billets for railway rolling stock. Specifications RUSS60692
GOST R 54160-2010 Ribbons from cuprum-nickel, nickel silver and monel. Specifications RUSS60803
GOST 5189-75 Constantan strips. Specifications RUSS60920
GOST 18126-94 Bolts and nuts with thread diameter over 48 mm. General specifications RUSS60972
GOST 31622-2012 Wrought stainless steel for surgical implants. Specifications RUSS61169
GOST 31625-2012 Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications RUSS62169
GOST 5187-2003 Nickel silver, german silver and monel tapes. Specifications RUSS62698
GOST R ISO 2307-2007 Fibre ropes. Methods for determination of certain physical and mechanical properties RUSS63254
GOST R 51397-99 Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications RUSS63534
GOST 5187-70 Nickel silver, german silver and monel tapes. Specifications RUSS63864
GOST 5221-2008 Tin-zink bronze wire. Specifications RUSS63865
GOST ISO 10819-2002 Vibration and shock. Method for the measurements and evaluation of the vibration transmissibility of gloves at the palm of the hand RUSS63975
GOST R 51573-2000 Tubes from alloyed brasses for heat-exchange apparatus. Specifications RUSS64064
GOST R 54864-2011 Hot-deformed seamless steel pipes for the welded steel structures. Specifications RUSS64278
GOST R ISO 10819-99 Mechanical vibration and shock. Method for the measurements and evaluation of the vibration transmissibility of gloves at the palm of the hand RUSS64360
GOST 1535-2006 Copper rods. Specifications RUSS64719
GOST R 12.4.219-99 Occupational safety standards system. High-visibility warning clothing. Technical requirements RUSS64847
GOST R ISO 17853-2012 Implants for surgery. Wear of implant materials. Polymer and metal wear particles. Isolation and characterization RUSS64946
GOST 26447-85 Rocks. Method for determination of mechanical properties for unconfined compressive strength of clay rocks RUSS65015
GOST R 54158-2010 Thin-walled tubes from copper and copper alloys. Specifications RUSS65531
GOST R 55941-2014 Grooved rails. Specifications RUSS65737
GOST R 55498-2013 Rolled wheel centres for railway rolling stock. Technical specifications RUSS66312

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!