Documents by Year

1940s (5450)

1950s (6530)

1960s (10297)

1970s (20852)

1980s (11255)

1990s (7137)

2000s (6038)

2010s (17738)

2020s (1142)

2020 (1142)

GOST

1970

«
1
…
11
12
13
14
15
16
17
…
51
»

Slipping clutches. Main parameters and dimensions

Boxes made of boards for tools and machine implements

Instruments for physical-chemical quantities measurement. Mass spectrometers. Terms and definitions

Clothing fabrics of pure wool and wool blend (mixed). General technical requirements

Crank closed presses for cutting billets. Standards of accuracy

Rubbers, synthetic, butadiene-methylstyrene SKMS-30ARK and butadiene-styrene SCS-30ARK

Rubbers synthetic butadiene-methylstyrene SKMS-30ARKM-27 and butadiene-styrene SCS-30ARKM-27

Boxes of corrugated cardboard for medicines and medicinal plant raw materials

Discharger of type RB-3 for devices of broad application

Discharger of type RB-5 for devices of broad application

Discharger of type R-5 for devices of broad application

Discharger of type R-350 for devices of broad application

GOST 15634.0-70

Magnet wire. Test procedure for the dimensions and increase in dimensions due to the covering measuring

Price: $84.00

GOST 15634.1-70

Magnet wire. Method of the elongation test

Price: $118.00

GOST 15634.2-70

Magnet wire. Method of the insulation abrasion test

Price: $48.00

GOST 15634.3-70

Magnet wire. Method of the bending test

Price: $134.00

GOST 15634.4-70

Magnet wire. Methods of the breakdown voltage test

Price: $151.00

Refractory fire-clay products for hot-metal transfer ladles lining. Specifications

Price: $118.00

Plates square 240x240 mm of universal-assembly devices with grooves 16 mm. Design and dimensions

Plates square 360x360 mm of universal-assembly devices with grooves 16 mm. Design and dimensions

Plates rectangular in width of 240 mm of universal-assembly adaptations with grooves of 16 mm. Design and dimensions

Square plates with a height of 360 mm of universal-assembled devices with grooves of 16 mm. Design and dimensions

Plates are round with a cross-shaped arrangement of grooves of universal-assembled devices with grooves of 16 mm. Design and dimensions

Plates, round with a radial-shaped arrangement of grooves of universal-assembled devices with grooves of 16 mm. Design and dimensions

The angle bracket, basic with a height of 360 mm of universal-assembly devices with grooves of 16 mm. Design and dimensions

The square is a base with a height of 600 mm of universal-assembled devices with grooves of 16 mm. Design and dimensions

Lathe with a height of 220 mm of universal-assembly devices with grooves of 16 mm. Design and dimensions

Lathe with a height of 250 mm of universal-assembly devices with grooves of 16 mm. Design and dimensions

Screws of universal-assembled devices with grooves 16 mm. Design and dimensions

Gaskets rectangular 60x90 mm of universal-assembly devices with grooves 16 mm. Design and dimensions

Gaskets rectangular 60x120 mm of universal-assembly devices with grooves 16 mm. Design and dimensions

Gaskets rectangular 90x120 mm of universal-assembly devices with grooves 16 mm. Design and dimensions

Gaskets rectangular 60x90 mm of universal-assembly devices with grooves 16 mm. Design and dimensions

Supports square 60x120 mm with two longitudinal T-grooves of universal-assembled devices with grooves 16 mm. Design and dimensions

Lining square 90x120 mm with two T-shaped grooves of universal-assembly devices with grooves 16 mm. Design and dimensions

Supports square 90x90 mm with four longitudinal T-slots of universal-assembly devices with grooves of 16 mm. Design and dimensions

Supports square 120x120 mm of universal-assembly devices with grooves 16 mm. Design and dimensions

Supports rectangular 60x90 mm universally-assembled devices with grooves 16 mm. Design and dimensions

The support, rectangular in height of 60 mm of universal-assembly devices with grooves of 16 mm. Design and dimensions

Supports square 60x120 mm with two longitudinal T-grooves of universal-assembled devices with grooves 16 mm. Design and dimensions

Support rectangular height of 60 mm with a central T-shaped groove universal-assembly devices with grooves 16 mm. Design and dimensions

Supports rectangular 60х 120 mm universal-assembly devices with grooves 16 mm. Design and dimensions

Supports rectangular 90 x 120 mm universally-assembled devices with grooves 16 mm. Design and dimensions

Supports rectangular 90 x 120 mm with two longitudinal T-grooves of universal-assembled devices with grooves of 16 mm. Design and dimensions

Supports, square, 60x90 mm with 3 longitudinal T-grooves of universal-assembled devices with grooves 12 mm. Design and dimensions

Supports round universal-assembly devices with grooves of 16 mm. Design and dimensions

The support is rectangular 60x90 mm with crisscross holes of universally-assembled devices with grooves of 16 mm. Design and dimensions

Supports with mounting hole diameter 26, 35 mm universal-assembly devices with grooves 16 mm. Design and dimensions

«
1
…
11
12
13
14
15
16
17
…
51
»

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!