Documents by Year
1940s (5450)
1950s (6530)
1960s (10297)
1970s (20852)
1980s (11255)
1990s (7137)
2000s (6038)
2010s (17738)
2020s (1142)

GOST

1975

GOST 20588-75
GOST 20588-75
Transition plate for universal assembly stamps with 16 mm grooves. Construction and dimensions
GOST 20589-75
GOST 20589-75
Upper holders with width of 60 mm for modular punches with slots of 16 mm. Construction and dimensions
GOST 20590-75
GOST 20590-75
Holder upper with a width of 120 mm for universally-assembled dies with grooves of 16 mm. Design and dimensions
GOST 20591-75
GOST 20591-75
Upper holder with width of 180 mm for modular dies with slots of 16 mm. Construction and dimensions
GOST 20592-75
GOST 20592-75
Punch holders with width of 75 and 100 mm for modular punches with slots of 16 mm. Construction and dimensions
GOST 20593-75
GOST 20593-75
Punch holders with width of 100, 140, 180 mm for modular punches with slots of 16 mm. Construction and dimensions
GOST 20594-75
GOST 20594-75
Lower holders for modular punches with slots of 16 mm. Construction and dimensions
GOST 20595-75
GOST 20595-75
The upper holder of assembled dies with 16 mm grooves. Design and dimensions
GOST 20596-75
GOST 20596-75
Holders of punches with a height of 25 mm of universal-assembled dies with grooves of 16 mm. Design and dimensions
GOST 2059-75
GOST 2059-75
Brown coals, hard coals, anthracites and combustible shales. Accelerated method for the determination of total sulphur content
GOST 20597-75
GOST 20597-75
Punch holders for modular punches with slots of 16 mm. Construction and dimensions
GOST 20598-75
GOST 20598-75
Holder punches with an installation hole diameter of 40 - 100 mm universally-assembled dies with grooves of 16 mm. Design and dimensions
GOST 20599-75
GOST 20599-75
The holder of punches 210x210 mm with a height of 25 mm universally-assembled dies with grooves of 16 mm. Design and dimensions
GOST 20600-75
GOST 20600-75
The holder of punches 210x210 mm with a height of 75 mm of all-purpose molded dies with grooves of 16 mm. Design and dimensions
GOST 20601-75
GOST 20601-75
Holder of punches 240x240 mm of universal-assembled dies with grooves of 16 mm. Design and dimensions
GOST 20602-75
GOST 20602-75
The holder of quick-change matrices with an installation hole of 22 - 50 mm in diameter of universal-assembled dies with grooves of 16 mm. Design and dimensions
GOST 20603-75
GOST 20603-75
Holder of quick-change matrices with a mounting hole with a diameter of 80 mm for modular dies with slots of 16 mm. Construction and dimensions
GOST 20604-75
GOST 20604-75
Holder of quick-change matrices with a mounting hole with a diameter of 130 mm for modular dies with slots of 16 mm. Construction and dimensions
GOST 20605-75
GOST 20605-75
Holder of quick-change matrices with a mounting hole with a diameter of 180 mm for modular dies with slots of 16 mm. Construction and dimensions
GOST 20606-75
GOST 20606-75
Holder of quick-change matrices with a mounting hole with a diameter of 240 mm for modular dies with slots of 16 mm. Construction and dimensions
GOST 20607-75
GOST 20607-75
The die holders, movable of universal-assembled dies with grooves of 16 mm. Design and dimensions
GOST 20608-75
GOST 20608-75
Square supports for unity-type modular dies with 16 mm slots. Construction and dimensions
GOST 20609-75
GOST 20609-75
Rectangular 60 mm wide supports for unity-type precast dies with 16 mm slots. Design and dimensions
GOST 20610-75
GOST 20610-75
Support of pushers of universally assembled dies with grooves of 16 mm. Design and dimensions
GOST 20611-75
GOST 20611-75
Support of pushers, medium, of universally assembled dies with grooves of 16 mm. Design and dimensions
GOST 20612-75
GOST 20612-75
Cylindrical support unity-type precast dies with 16 mm slots. Design and dimensions
GOST 20613-75
GOST 20613-75
Rectangular 40 mm high supports for unity-type precast stamps with 16 mm slots. Construction and dimensions
GOST 20614-75
GOST 20614-75
Supports for unity-type precast dies with 16 mm slots. Construction and dimensions
GOST 20615-75
GOST 20615-75
Rectangular support for unity-type precast dies with 16 mm slots. Construction and dimensions
GOST 20616-75
GOST 20616-75
Round supports for utility-type precast stamps with 16 mm slots. Construction and dimensions
GOST 20617-75
GOST 20617-75
Cavity retainer plates for modular dies 16 mm flutes. Construction and dimensions
GOST 20618-75
GOST 20618-75
Pockets of universal punches with grooves 16 mm. Design and dimensions
GOST 20619-75
GOST 20619-75
Upper plunger retainer plate for modular dies with 16 mm flutes. Construction and dimensions
GOST 20620-75
GOST 20620-75
Lower plunger retainer plate for modular dies with 16 mm flutes. Construction and dimensions
GOST 20621-75
GOST 20621-75
Remover tools for universal assembling dies with slots of 16 mm in size. Construction and dimensions
GOST 20622-75
GOST 20622-75
Guiding columns of modular punches with slots of 16 mm. Construction and dimensions
GOST 20623-75
GOST 20623-75
Stops of universal punches with grooves 16 mm. Design and dimensions
GOST 20624-75
GOST 20624-75
Swinging Stop for universal precast dies with slots of 16 mm. Construction and dimensions
GOST 20625-75
GOST 20625-75
Circular remover tools for multiuse assembling dies with slots of 16 mm in size. Construction and dimensions
GOST 20626-75
GOST 20626-75
Fixed cross-slotted remover tools for multiuse assembling dies with slots of 16 mm in size. Construction and dimensions
GOST 20627-75
GOST 20627-75
Fixed long-slotted remover tools for multiuse assembling dies with slots of 16 mm in size. Construction and dimensions
GOST 20628-75
GOST 20628-75
Modular dies with 16 mm flutes fixed stripper retainer plate. Construction and dimensions
GOST 20629-75
GOST 20629-75
The clip of a movable puller with a height of 20 mm of universal-assembled dies with grooves of 16 mm. Design and dimensions
GOST 20630-75
GOST 20630-75
Modular dies with 16 mm flutes movable stripper retainer plate 40mm height. Construction and dimensions
GOST 20631-75
GOST 20631-75
Parting punch modular stamps sections with 16 mm grooves. Construction and dimensions
GOST 20632-75
GOST 20632-75
Parting matrix modular stamps sections with 16 mm grooves. Construction and dimensions
GOST 20633-75
GOST 20633-75
Punch sections 30 mm width of modular stamps with 16 mm grooves. Construction and dimensions
GOST 20634-75
GOST 20634-75
Punch sections 60, 90 mm width of modular stamps with 16 mm grooves. Construction and dimensions

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power Industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!