Documents by Year
1940s (5450)
1950s (6530)
1960s (10297)
1970s (20852)
1980s (11255)
1990s (7137)
2000s (6038)
2010s (17738)
2020s (1142)

GOST

1970

GOST 16188-70
GOST 16188-70
Sorbents. Method for determination of abrasive hardness
Price: $75.24
GOST 16189-70
GOST 16189-70
Sorbents. Method for reduction and dispersion of samples
Price: $84.00
GOST 16190-70
GOST 16190-70
Sorbents. Method for determination of bulk density
Price: $134.00
GOST 16191-70
GOST 16191-70
Blanks of female dies holders of horizontal forging machines. Construction and dimensions
Price: $201.00
GOST 16192-70
GOST 16192-70
Blanks of female dies inserts of horizontal forging machines. Construction and dimensions
Price: $118.00
GOST 16193-70
GOST 16193-70
Blanks of dies backing of horizontal forging machines. Construction and dimensions
Price: $201.00
GOST 16194-70
GOST 16194-70
Prismatic keys of dies of horizontal forging machines. Construction and dimensions
Price: $84.00
GOST 16195-70
GOST 16195-70
Blanks of male dies holders for wedged and flanged fixing of male dies of horizontal forging machines. Construction and dimensions
Price: $134.00
GOST 16196-70
GOST 16196-70
Blanks of male dies holders for screwed fixing of male dies of horizontal forging machines. Construction and dimensions
Price: $118.00
GOST 16197-70
GOST 16197-70
Blanks of male dies holders for coupling fixing of male dies of horizontal forging machines. Construction and dimensions
Price: $118.00
GOST 16198-70
GOST 16198-70
Blanks of details and details of dies of horizontal forging. General technical requirements
Price: $84.00
GOST 16199-70
GOST 16199-70
Transistors. Methods for determining the limiting and limiting frequencies of the current transfer coefficient in the frequency range up to 20 MHz
GOST 16200-70
GOST 16200-70
Transistors. Methods for measuring the voltage between the collector and the emitter at zero current of the base and a given emitter current
GOST 16201-70
GOST 16201-70
Transistors. Method for measuring base resistance at frequencies up to 1 MHz
GOST 16202-70
GOST 16202-70
Gearing. The initial contour of bevel gears with circular teeth
GOST 16203-70
GOST 16203-70
One-column dividing stands. Dimensions
Price: $84.00
GOST 16204-70
GOST 16204-70
One-column dividing stands with electromechanical drive. Dimensions
Price: $84.00
GOST 16205-70
GOST 16205-70
Two-point dividing posts. Basic dimensions
GOST 16206-70
GOST 16206-70
Table-stand with pneumatic clamp. Basic dimensions
GOST 16207-70
GOST 16207-70
Pigments bright red 4 ZhV, red-orange B, red-brown B (organic dyes)
GOST 16208-70
GOST 16208-70
Sources of radiation are highly intensive for devices of wide application. General specifications
GOST 16209-70
GOST 16209-70
Dial depth gauges. Methods and means of verification
GOST 16210-70
GOST 16210-70
Railway rails type P75. Dimensions
GOST 16211-70
GOST 16211-70
Centre cone arbors. Design and dimensions
Price: $684.28
GOST 16212-70
GOST 16212-70
Cylindrical centre arbors. Design and dimensions
Price: $555.30
GOST 16213-70
GOST 16213-70
Cylindrical stepped centre arbors. Design and dimensions
Price: $607.87
GOST 16214-70
GOST 16214-70
Tape polyvinylchloride electro insulation. Specification
Price: $295.20
GOST 16215-70
GOST 16215-70
Fork lift trucks of general purpose
GOST 16216-70
GOST 16216-70
Measures of length dashed. Methods and means of verification
GOST 16217-70
GOST 16217-70
Strain gage load sells. Terms and definitions
GOST 16218.0-70
GOST 16218.0-70
Small wares. Sampling
GOST 16218.1-70
GOST 16218.1-70
Small wares. Method for determination of linear dimensions
GOST 16218.2-70
GOST 16218.2-70
Small wares. Method of weight determination
GOST 16218.3-70
GOST 16218.3-70
Small wares. Method for determining the height of the pile
GOST 16218.4-70
GOST 16218.4-70
Small wares. Method for determination of density
GOST 16218.5-70
GOST 16218.5-70
Small wares. Measuring method of tearing load and elongation of break
GOST 16218.6-70
GOST 16218.6-70
Small wares. Method for determining the thickness (linear density) of a thread
GOST 16218.7-70
GOST 16218.7-70
Small wares. Method for determination of resistance. For abrasion
GOST 16218.8-70
GOST 16218.8-70
Small wares. Method for determination of resistance for abrasion
GOST 16219-70
GOST 16219-70
Sprockets for drive and conveyor roller long-link chains. Method for calculating and constructing the profile of sprocket tooth
GOST 16220-70
GOST 16220-70
Organic dyes. Bottom bright green HDD and bright green LED
GOST 16221-70
GOST 16221-70
Yurts felt
GOST 16222-70
GOST 16222-70
Shell end milling cutters for machining light alloys. Design and dimensions
GOST 16223-70
GOST 16223-70
End face cutters with insert knives, equipped with hard alloy plates, for processing light alloys. Design and dimensions
GOST 16224-70
GOST 16224-70
Knives, wedge, corrugated, equipped with plates of hard alloy, for the end mills for processing light alloys. Design and dimensions
GOST 16225-70
GOST 16225-70
Shank cutters for machining light alloys. Types and dimensions
GOST 16226-70
GOST 16226-70
End double-tooth mill threaded shank for machining light alloys. Design and dimensions
GOST 16227-70
GOST 16227-70
Three-sided disk milling cutters for processing light alloys. Design and dimensions

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!