Documents by Year
1940s (5450)
1950s (6530)
1960s (10297)
1970s (20852)
1980s (11255)
1990s (7137)
2000s (6038)
2010s (17738)
2020s (1142)

GOST

1975

GOST 21342.3-75
GOST 21342.3-75
Alternating resistors. The method of checking the functional characteristic of the change in resistance
GOST 21342.4-75
GOST 21342.4-75
Alternating resistors. The method of checking the impedance imbalance of multielement resistors
GOST 21342.5-75
GOST 21342.5-75
Alternating resistors. Methods for measuring the minimum resistance and initial resistance surge
GOST 21342.6-75
GOST 21342.6-75
Resistors variable. Control methods for dynamic noise of moving system
Price: $300.00
GOST 21344-75
GOST 21344-75
The cork piercing steel valves on the Rnom are approximately 6.4 MPa (64 kgf / cm2). Specification
GOST 21345-75
GOST 21345-75
Cranes, corked for Ro of over 1.0 (10) to 16 (160) MPa (kgf / cm2) and spherical for Ru from 1.0 (10) to 16 (160) MPa (kgf / cm2). General technical requirements
GOST 21346-75
GOST 21346-75
Horizontal mixers for the animal feed industry
GOST 21347-75
GOST 21347-75
Bars for threading pipe cylindrical thread. Diameters
Price: $84.00
GOST 21348-75
GOST 21348-75
Holes for threading pipe cylindrical thread. Diameters
Price: $68.00
GOST 21349-75
GOST 21349-75
Bars for threading pipe taper screw thread. Diameters
Price: $84.00
GOST 21350-75
GOST 21350-75
Holes for threading pipe taper screw thread. Diameters
Price: $68.00
GOST 21351-75
GOST 21351-75
Reducers conical-cylindrical three-step type KC2. The main parameters
GOST 21352-75
GOST 21352-75
Feed regulators. Specification
GOST 21353-75
GOST 21353-75
Latex films. Method for determination of tear resistance
Price: $118.00
GOST 21354-75
GOST 21354-75
Cylindrical evolvent gearings. Strength calculation
GOST 21355-75
GOST 21355-75
Motor reducers, planetary, geared, single-stage of type MPs. Basic parameters and dimensions
GOST 21356-75
GOST 21356-75
Motor reducers, planetary, geared, single-stage of type MPz2. Basic parameters and dimensions
GOST 21357-75
GOST 21357-75
Castings made of cold- and wear- resistant steel. General specifications
GOST 21358-75
GOST 21358-75
Dump trucks
GOST 21390-75
GOST 21390-75
Special equipment of container transport system. Terms and definitions
GOST 21391-75
GOST 21391-75
Means of bundling of goods. Terms and definitions
GOST 21392-75
GOST 21392-75
Vehicles of operational services, color schemes, markings, special light and sound signals. Technical specifications
GOST 21393-75
GOST 21393-75
Automobiles with diesel engines. Smoke emission. Norms and methods of measurements. Safety requirements
Price: $168.00
GOST 21395.0-75
GOST 21395.0-75
Resistors. Method of control of requirements for design. General
Price: $151.00
GOST 21395.1-75
GOST 21395.1-75
Resistors and capacitors. Methods for testing the general appearance, dimensions, mass, external appearance and labeling
GOST 21395.2-75
GOST 21395.2-75
Resistors and capacitors. Methods of leak and compaction testing
GOST 21395.3-75
GOST 21395.3-75
Variable resistors. Test methods of easy running of motion smoothness, torque moment (stress of motion), starting (stress) torque movable system of resistor, operation of moment (stress) of resistor switch
Price: $134.00
GOST 21395.4-75
GOST 21395.4-75
Alternating resistors. Control method of rotation angle or motion of movable system, operation angle of resistor's switch or motion under operation of resistor's switch
Price: $101.00
GOST 21395.5-75
GOST 21395.5-75
Resistors variable. Test method for stopper strength of moving system
Price: $134.00
GOST 21395.6-75
GOST 21395.6-75
Resistors variable. Test methods for rotational mechanical life of resistor and resistor switch
Price: $300.00
GOST 21395.7-75
GOST 21395.7-75
Resistors variable. Test method for stop strength
Price: $118.00
GOST 21396-75
GOST 21396-75
The measuring pulse generators. Methods of tests
GOST 21397-75
GOST 21397-75
Non-destructive check. Set of standard samples for ultrasonic testing semi-finished and aluminium alloy products. Main parameters and technical requirements
GOST 21398-75
GOST 21398-75
Trucks. General technical requirements
GOST 21399-75
GOST 21399-75
Transport packs of non-ferrous metal pigs, cathodes and ingots. General requirements
Price: $267.00
GOST 21400-75
GOST 21400-75
Chemical and laboratory glass. Technical specifications. Test methods
Price: $134.00
GOST 21401-75
GOST 21401-75
Plain limit gauges for dimensions up to 500 mm. Required dimensions
Price: $1,051.00
GOST 21402.0-75
GOST 21402.0-75
Magnetic tapes for domestic sound recording. General specifications
GOST 21402.1-75
GOST 21402.1-75
Magnetic tapes with a width of 3.81 mm and a thickness of 16 μm for household recording. Basic parameters and dimensions. Technical requirements
GOST 21402.2-75
GOST 21402.2-75
Magnetic tapes with a width of 6.25 mm and a thickness of 34 μm for household recording. Basic parameters and dimensions. Technical requirements
GOST 21403-75
GOST 21403-75
Three-phase asynchronous squirrel-cage explosion-proof mining motors from 0.25 to 110 kW General specifications
GOST 21404-75
GOST 21404-75
Large-size electrical rotating machines with frame number over 355. Synchronous motors. General specifications
GOST 21405-75
GOST 21405-75
Fresh small-fruited cherry-plums
Price: $84.00
GOST 21406-75
GOST 21406-75
Statistical regulation of technological processes by the method of cumulative sums of selective dispersion characteristics
GOST 21407-75
GOST 21407-75
Incisors turning latches bent with carbide inserts for processing plastics. Design and dimensions
GOST 21408-75
GOST 21408-75
Incisors turning latches resistant bent with carbide plates for plastic processing. Design and dimensions
GOST 21409-75
GOST 21409-75
Incisors turning scoring bent with carbide inserts for processing plastics. Design and dimensions
GOST 21410-75
GOST 21410-75
Cutting lathes with carbide inserts for processing plastics. Design and dimensions

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power Industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!