Documents by Year
1940s (5450)
1950s (6530)
1960s (10297)
1970s (20852)
1980s (11255)
1990s (7137)
2000s (6038)
2010s (17738)
2020s (1142)

GOST

1975

GOST 10696-75
GOST 10696-75
The pump for water-jet laboratory glass. Specification
GOST 10700-75
GOST 10700-75
Waste paper and board
GOST 10713-75
GOST 10713-75
Gas analyzers for determining the carbon content in steel, cast iron and other materials. Specification
GOST 10717-75
GOST 10717-75
Instruments for measuring hardness. Types and main parameters
GOST 10719-75
GOST 10719-75
Binding materials. Method for the determination of adhesion and thermoadhesion
Price: $151.00
GOST 10720-75
GOST 10720-75
Carbon electrodes for arc-cutting and welding of metals. Specification
GOST 10721-75
GOST 10721-75
Electric stackers
GOST 10728-75
GOST 10728-75
Filming cameras for 35- and 70-mm motion pictures. Main parameters and technical requirements
GOST 10-75
GOST 10-75
Inside micrometers. The main parameters. Technical requirements
GOST 10758-75
GOST 10758-75
Polyvinyl formyl
GOST 10761-75
GOST 10761-75
Textiles. Method for determining the resistance of colors to light on a device with fluorescent lamps
GOST 10765-75
GOST 10765-75
Selenium semiconductor devices. The main parameters
GOST 10773-75
GOST 10773-75
Pin cylindrical mortises. Dimensions
GOST 10774-75
GOST 10774-75
Pins cylindrical with drilled ends (riveted)
GOST 10792-75
GOST 10792-75
Caterpillar dozers for general purpose. Rules of acceptance and test methods
GOST 10819-75
GOST 10819-75
Variable speed chain drives. Basic parameters
GOST 10820-75
GOST 10820-75
Pulp. Method for determination of pentosans fraction of total mass
Price: $134.00
GOST 10821-75
GOST 10821-75
Wire made of platinum and platinum-rhodium alloys for thermoelectric thermometers
Price: $333.00
GOST 10826-75
GOST 10826-75
Vibrators pneumatic manual, downhole. The main parameters
GOST 10828-75
GOST 10828-75
Rubber. Method for the determination of dynamic modulus and internal friction modulus under variable sing flexure with rotation
Price: $134.00
GOST 10838-75
GOST 10838-75
Paper for household and sanitary products. Specification
GOST 10876-75
GOST 10876-75
Single-stage Thickeners. Specification
GOST 10879-75
GOST 10879-75
Lamp electronic type 6P15P. Specification
GOST 10881-75
GOST 10881-75
Electronic lamp type 6E1P
GOST 10885-75
GOST 10885-75
Hot-rolled two-ply corrosion-resistant steel sheets
GOST 10887-75
GOST 10887-75
Silicoorganic damping fluids 132-30. Specifications
Price: $300.00
GOST 10890-75
GOST 10890-75
Units of compressor-condenser refrigerating machines with cooling capacity from 3,5 to 263 kW (from 3000 to 226,000 kcal / h). Types and main parameters
GOST 10891-75
GOST 10891-75
Photographic films for microfilming
GOST 10899-75
GOST 10899-75
Ion exchange resins. Method for determination of resistance to chemical agents
GOST 10901-75
GOST 10901-75
Pick up balers
GOST 10905-75
GOST 10905-75
Surface plates and face-plates. Technical requirements
GOST 10908-75
GOST 10908-75
Mechanical quadrants with level. Specifications
Price: $300.00
GOST 10912-75
GOST 10912-75
Synchronoscopes. General specifications
GOST 10918-75
GOST 10918-75
Condenser mica. Methods of tests
GOST 10919-75
GOST 10919-75
Pneumatic supports for handheld pneumatic punchers. Specification
GOST 10922-75
GOST 10922-75
Reinforcement products and embedded parts, welded for reinforced concrete structures. Requirements and test methods
GOST 10926-75
GOST 10926-75
The wedge gate valves with sliding spindle steel on Pd approximately 6.4 MPa (64 kgf / cm2). Specification
GOST 10928-75
GOST 10928-75
Bismuth
GOST 10936-75
GOST 10936-75
Semi-wagons of trunk gauge railways 1520 (1524) mm. Technical requirements
GOST 10938-75
GOST 10938-75
SSI. Parameters of pulsed electrical input and output signals with a discrete parameter change
GOST 10944-75
GOST 10944-75
Control valves of the heating installations for building water heating systems
Price: $488.47
GOST 10949-75
GOST 10949-75
Drill rods. Dimensions of fitting cone for drilling bits
Price: $84.00
GOST 10950-75
GOST 10950-75
Coniferous sawn timber. Antiseptic methods of immersion
GOST 10952-75
GOST 10952-75
Rubber. Methods for determination of fatigue life under variable sign flexure with rotation
Price: $134.00
GOST 10959-75
GOST 10959-75
Flasks for determination of sugar content
GOST 10967-75
GOST 10967-75
Grain. Methods for determining odor, color and taste
GOST 10973-75
GOST 10973-75
Glass laboratory dishes
GOST 10982-75
GOST 10982-75
Write enamel ЭП-148 for refrigerators and other electrodomestic devices. Specifications
Price: $365.00

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power Industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!