Documents by Year
1930s (86)
1940s (117)
1950s (2)
1960s (844)
1970s (20003)
1980s (20684)
1990s (2216)
2000s (520)
2010s (44)
2020s (1)
Other (744)

OST

OST 34-42-565-82
OST 34-42-565-82
Tanks and reservoirs of TPS and APS made of carbon steel with a capacity up to 1000 m3. Cylindrical vertical reservoirs with heat insulation. Types and main dimensions.
OST 34-42-566-82
OST 34-42-566-82
Tanks and reservoirs of TPS and APS made of carbon steel with a capacity up to 1000 m3. Technical requirements. Types and main dimensions.
OST 34-42-569-82
OST 34-42-569-82
Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-42-570-82
OST 34-42-570-82
Axial two-lens compensator at PN
OST 34-42-571-82
OST 34-42-571-82
Axial three-lens compensator at PN
OST 34-42-572-82
OST 34-42-572-82
Axial four-lens compensator at PN
OST 34-42-573-82
OST 34-42-573-82
Angular single-lens compensator at PN
OST 34-42-574-82
OST 34-42-574-82
Angular two-lens compensator PN
OST 34-42-575-82
OST 34-42-575-82
Angular three-lens compensator at PN
OST 34-42-576-82
OST 34-42-576-82
Angular four-lens compensator at PN
OST 34-42-577-82
OST 34-42-577-82
Angular, single-lens, dual compensator at PN
OST 34-42-578-82
OST 34-42-578-82
Angular, two-lens, dual compensator at PN
OST 34-42-579-82
OST 34-42-579-82
Angular, three-lens, dual compensator at PN
OST 34-42-580-82
OST 34-42-580-82
Angular, four-lens, dual compensator at PN
OST 34-42-581-82
OST 34-42-581-82
Axial and angular lens compensators at PN
OST 3-4773-82
OST 3-4773-82
Optical colourless glass TBF512 (ТБФ512). Technical specifications.
OST 3-4837-82
OST 3-4837-82
Places of centralized storage of raw materials at plant. General technical requirements.
OST 3-4838-82
OST 3-4838-82
Raw materials and supplies. Storage requirements.
OST 3-4839-82
OST 3-4839-82
Ferrous and non-ferrous metals and alloys. Tagging at central storage of enterprise.
OST 3-4892-82
OST 3-4892-82
Optical Ceramics K012. Technical conditions.
OST 3-4905-82
OST 3-4905-82
Cylindrical fine-grained spurs. Types, basic parameters and dimensions.
OST 3-4906-82
OST 3-4906-82
Cylindrical fine-grained spurs. Design and dimensions.
OST 3-4907-82
OST 3-4907-82
Cylindrical fine-grained spurs with backlash selector. Design and dimensions.
OST 3-4908-82
OST 3-4908-82
Cylindrical fine-grained spurs. Technical requirements.
OST 3-4909-82
OST 3-4909-82
Cylindrical fine-grained spurs with backlash selector. Billets. Design and dimensions.
OST 3-4910-82
OST 3-4910-82
Springs. Design and dimensions.
OST 3-4911-82
OST 3-4911-82
Screws. Construction and dimensions.
OST 3-4931-82
OST 3-4931-82
Optical glass of 100 series. Synthetic structure.
OST 3-4944-82
OST 3-4944-82
Prism observation instruments. Optical scheme regulations.
OST 3-5087-82
OST 3-5087-82
Oxide-tin electrodes glass manufacturing. Specifications.
OST 3-5098-82
OST 3-5098-82
Castings of non-ferrous metals and alloys. Limit deviations and tolerances.
OST 3-5100-82
OST 3-5100-82
Silica flour for making optical glass. Typical technological process of cooking.
OST 3-5105-82
OST 3-5105-82
4-methyl pentene-1 and methyl-acrylic acid copolymer. Technical specifications.
OST 3-5107-82
OST 3-5107-82
Belleville springs of high-strength corrosion-resistant steel. Specifications.
OST 3-5108-82
OST 3-5108-82
Universal die for cutting from stripe with width up to 1 mm. Design and dimensions.
OST 3-5109-82
OST 3-5109-82
Universal die for cutting from workpieces with width up to 3 mm. Design and dimensions.
OST 3-5110-82
OST 3-5110-82
Universal die for large size parts cutting. Design and dimensions.
OST 3-5111-82
OST 3-5111-82
Universal die for cutting from piece blanks. Design and dimensions.
OST 3-5112-82
OST 3-5112-82
Universal unit chipping-out of strip. Design and dimensions.
OST 3-5113-82
OST 3-5113-82
Universal die for holes punching. Design and dimensions.
OST 3-5114-82
OST 3-5114-82
Gill perforating die. Design and dimensions.
OST 3-5115-82
OST 3-5115-82
Hole perforating die. Design and dimensions.
OST 3-5116-82
OST 3-5116-82
Universal die for movable punch bending. Design and dimensions.
OST 3-5117-82
OST 3-5117-82
Universal die for bending parts of type “Holder”. Design and dimensions.
OST 3-5118-82
OST 3-5118-82
Universal die for bending parts with extended flanges. Design and dimensions.
OST 3-5119-82
OST 3-5119-82
Universal die for bending. Design and dimensions.
OST 3-5120-82
OST 3-5120-82
Universal die for bending parts of clip type. Design and dimensions.
OST 3-5121-82
OST 3-5121-82
Corrugation bending and coing die. Design and dimensions.

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!