Documents by Year
1930s (86)
1940s (117)
1950s (2)
1960s (844)
1970s (19991)
1980s (20680)
1990s (2216)
2000s (517)
2010s (44)
2020s (1)
Other (951)

OST

1967

OST 23.510-67
OST 23.510-67
Dies rubber-technical parts (RTP) manufacturing. Technical requirements.
OST 23.51-67
OST 23.51-67
Dies rubber-technical parts (RTP) manufacturing. RTP classification and die design.
OST 23.521-67
OST 23.521-67
Dies for cold stamping. Plates without flanges (blanks). Design and dimensions.
OST 23.522-67
OST 23.522-67
Dies for cold stamping. Plates with flanges along plate width (blanks). Design and dimensions.
OST 23.523-67
OST 23.523-67
Dies for cold stamping. Plates with flanges along plate length (blanks). Design and dimensions.
OST 23.524-67
OST 23.524-67
Dies for cold stamping. Plates with rear location of pins (blanks). Design and dimensions.
OST 23.525-67
OST 23.525-67
Dies for cold stamping. Round plates for axial location of guide pins (blanks). Design and dimensions.
OST 23.526-67
OST 23.526-67
Dies for cold stamping. Large plates (blanks). Design and dimensions.
OST 23.52-67
OST 23.52-67
Molds for the manufacture of rubber technical parts RTD type 1 as per OST23.51-67. Design and dimensions
OST 23.527-67
OST 23.527-67
Dies for cold stamping. Grooved guiding pins (blanks). Design and dimensions.
OST 23.528-67
OST 23.528-67
Dies for cold stamping. Stepped guide bushings. Design and dimensions.
OST 23.529-67
OST 23.529-67
Dies for cold stamping. Stepped elongated guide bushings. Design and dimensions.
OST 23.530-67
OST 23.530-67
Dies for cold stamping. Slab blocks with and without flanges along plate width. Design and dimensions.
OST 23.531-67
OST 23.531-67
Dies for cold stamping. Slab blocks with flanges along plate width. Design and dimensions.
OST 23.532-67
OST 23.532-67
Dies for cold stamping. Slab blocks with flanges along plate length. Design and dimensions.
OST 23.533-67
OST 23.533-67
Dies for cold stamping. Slab blocks with rear location of pins and bushings. Design and dimensions.
OST 23.534-67
OST 23.534-67
Dies for cold stamping. Slab blocks with axial location of pins and bushings. Design and dimensions.
OST 23.535-67
OST 23.535-67
Dies for cold stamping. Blocks of large plates. Design and dimensions.
OST 23.536-67
OST 23.536-67
Dies for cold stamping. Shanks with flange. Design and dimensions.
OST 23.53-67
OST 23.53-67
Molds for the manufacture of rubber technical parts of RTD type 2 as per OST23.51-67. Design and dimensions
OST 23.537-67
OST 23.537-67
Dies for cold stamping. Shanks with edge. Design and dimensions.
OST 23.538-67
OST 23.538-67
Dies for cold stamping. Shanks with thead. Design and dimensions.
OST 23.539-67
OST 23.539-67
Dies for cold stamping. Floating shafts. Design and dimensions.
OST 23.540-67
OST 23.540-67
Dies for cold stamping. Shanks with flange and recessed. Design and dimensions.
OST 23.541-67
OST 23.541-67
Dies for cold stamping. Shanks with edge and recessed. Design and dimensions.
OST 23.542-67
OST 23.542-67
Dies for cold stamping. Shanks with thead and undercut. Design and dimensions.
OST 23.543-67
OST 23.543-67
Dies for cold stamping. Floating shafts with recess. Design and dimensions.
OST 23.544-67
OST 23.544-67
Dies for cold stamping. Rectangular moulds (blanks for sets). Design and dimensions.
OST 23.545-67
OST 23.545-67
Dies for cold stamping. Round moulds (blanks for sets). Design and dimensions.
OST 23.546-67
OST 23.546-67
Dies for cold stamping. Rectangular plates (blanks for sets). Design and dimensions.
OST 23.54-67
OST 23.54-67
Molds for the manufacture of rubber technical parts RTD type 3 as per OST23.51-67. Design and dimensions
OST 23.547-67
OST 23.547-67
Dies for cold stamping. Round plates (blanks for sets). Design and dimensions.
OST 23.548-67
OST 23.548-67
Dies for cold stamping. Rectangular thrust discs (blanks for sets). Design and dimensions.
OST 23.549-67
OST 23.549-67
Dies for cold stamping. Round thrust discs (blanks for sets). Design and dimensions.
OST 23.550-67
OST 23.550-67
Dies for cold stamping. Rectangular rubber lining (blanks for sets). Design and dimensions.
OST 23.551-67
OST 23.551-67
Dies for cold stamping. Rubber round lining (blanks for sets). Design and dimensions.
OST 23.552-67
OST 23.552-67
Dies for cold stamping. Lifting screws (trunions). Design and dimensions.
OST 23.553-67
OST 23.553-67
Dies for cold stamping. The transport pins to fill. Design and dimensions.
OST 23.554-67
OST 23.554-67
Dies for cold stamping. Die parts and units. Design and dimensions.
OST 23.55-67
OST 23.55-67
Molds for the manufacture of rubber technical parts RTD type 4 as per OST23.54-67. Design and dimensions
OST 23.56-67
OST 23.56-67
Dies rubber-technical parts (RTP) production type 5 as per OST23.51-67. Design and dimensions.
OST 23.57-67
OST 23.57-67
Dies rubber-technical parts (RTP) production type 6 as per OST23.51-67. Design and dimensions.
OST 23.58-67
OST 23.58-67
Dies rubber-technical parts (RTP) manufacturing. Columns. Design and dimensions.
OST 23.59-67
OST 23.59-67
Dies rubber-technical parts (RTP) manufacturing. Bushings. Design and dimensions.
OST 26-08-241-67
OST 26-08-241-67
Driving roller and bushing chain. Types, main parameters and dimensions
OST VSKH 8243/67
OST VSKH 8243/67
Norms of the device of tram tracks in curves

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!