Documents by Year
1930s (86)
1940s (117)
1950s (2)
1960s (844)
1970s (19991)
1980s (20680)
1990s (2216)
2000s (517)
2010s (44)
2020s (1)
Other (951)

OST

OST 1 00800-82
OST 1 00800-82
Aviation instruments. Technical requirements on embedded deal lightning devices.
OST 1 10012-82
OST 1 10012-82
Instrumental shafts of management. Design and dimensions.
OST 1 10013-82
OST 1 10013-82
Instrumental shafts of management. Design and dimensions.
OST 1 10014-82
OST 1 10014-82
Instrumental shafts of management. Design and dimensions.
OST 1 10015-82
OST 1 10015-82
Instrumental shaft of management. Design and dimensions.
OST 1 11232-82
OST 1 11232-82
Lobes. Design and dimensions.
OST 1 11811-82
OST 1 11811-82
Rotors of air separators. Design and dimensions.
OST 1 11812-82
OST 1 11812-82
Shafts. Design and dimensions.
OST 1 11813-82
OST 1 11813-82
Impellers. Design and dimensions.
OST 1 11814-82
OST 1 11814-82
Ring holders. Design and dimensions.
OST 1 11815-82
OST 1 11815-82
Rings. Design and dimensions.
OST 1 11816-82
OST 1 11816-82
Round nuts.
OST 1 11818-82
OST 1 11818-82
Sealing rings. Design and dimensions.
OST 1 12401-82
OST 1 12401-82
Photo wedge glasses. Construction and dimensions.
OST 1 12402-82
OST 1 12402-82
Compensating glasses. Construction and dimensions.
OST 1 52568-82
OST 1 52568-82
Pliers with combined jaws. Design and dimensions.
OST 1 52571-82
OST 1 52571-82
Pliers with combined curved jaws. Design and dimensions.
OST 1 52583-82
OST 1 52583-82
Grabbing devices to take out baskets from ovens. Design and dimensions.
OST 1 52585-82
OST 1 52585-82
Cylindrical boxes for cementation. Design and dimensions.
OST 1 52591-82
OST 1 52591-82
Baskets for heat treatment in baths. Design and dimensions.
OST 1 52595-82
OST 1 52595-82
Drills-countersinkings with angle of a countersinking 120 degrees for openings for rivets in the mixed packages for riveting machines. Design and dimensions.
OST 1 76005-82
OST 1 76005-82
Universal ВСВУ rectifiers. Basic parameters and technical requirements.
OST 1 76416-82
OST 1 76416-82
Reduction pneumatic valves, loaded with control pressure, with maximum output pressure 63 MPa (630 kg*f/cm2). Design and dimensions.
OST 1 76542-82
OST 1 76542-82
Round nuts with pipe thread. Construction and dimensions.
OST 1 76721-82
OST 1 76721-82
Joint-type couplings. Design and dimensions.
OST 1 76722-82
OST 1 76722-82
Cardan shafts. Design and dimensions.
OST 1 76767-82
OST 1 76767-82
Cotton braid rubber hoses clutches. Design and dimensions.
OST 1 76768-82
OST 1 76768-82
Nipples rubber hoses with cotton braid. Design and dimensions.
OST 1 76770-82
OST 1 76770-82
Rubber sleeves with connecting fittings on pressure of 15-24 MPa (150-240 kgf/cm2). Design and dimensions.
OST 1 76771-82
OST 1 76771-82
Rubber sleeves with metal braids on pressure of 15-24 MPa (150-240 kgf/cm2). Design and dimensions.
OST 1 76772-82
OST 1 76772-82
Metal braid rubber hoses clutches with. Design and dimensions.
OST 1 76773-82
OST 1 76773-82
Nipples for rubber hoses with metal braid. Design and dimensions.
OST 1 76774-82
OST 1 76774-82
Fitting for rubber hoses with metal braids. Design and dimensions.
OST 1 76775-82
OST 1 76775-82
Coupling nut for rubber hoses. Construction and dimensions.
OST 1 76777-82
OST 1 76777-82
Sleeves with tips on pressure of 25 MPa (250 kgf/cm2) with nominal width of 25 mm of RVD-25. Design and dimensions.
OST 1 76783-82
OST 1 76783-82
Pneumatic safety valves with spring alignment loading up to 63 MPa (630 kg*f/cm2). Design and dimensions.
OST 1 76784-82
OST 1 76784-82
Pneumatic reduction valves with spring loading with maximum output pressure 25 MPa (250 kg*f/cm2) Design and dimensions.
OST 1 80001-82
OST 1 80001-82
Industrial purity. Dust content particle deposition control method.
OST 1 80049-82
OST 1 80049-82
Thermal treatment of details of instruments made of alloyed and carbonic steels. Typical processes.
OST 1 80086-82
OST 1 80086-82
Industrial purity. Volumetric dust content measuring control method.
OST 1 80136-82
OST 1 80136-82
Cement bonding. Standard techniques and procedures.
OST 1 80201-82
OST 1 80201-82
Inscriptions and images produced by photochemical method. Typical technological processes.
OST 1 80220-82
OST 1 80220-82
Protection of places for swaging and expansion of parts in assemblies with paint-and-lacquer coatings. Typical technological process.
OST 1 80301-82
OST 1 80301-82
Industry-based uniformity measurement system. Unstandardized measuring instruments. Organization and arrangements for institutional metrological certification.
OST 1 80318-82
OST 1 80318-82
Stator and rotor pack electrical discharge grinding. Typical technological process.
OST 1 80319-82
OST 1 80319-82
Industrial purity. Standard of production premises allowable dustiness.
OST 1 80364-82
OST 1 80364-82
Printed board assembly washing. Typical technological process.
OST 1 80365-82
OST 1 80365-82
Printed circuit assemblies varnishing. Typical process.

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!