1962

RESET FILTERS    Category:   
Product Type:
I 194-62
I 194-62
Verification of phase meters
I 26-62
I 26-62
According to the calibration of oil dispensers M-367
MN 2877-62
MN 2877-62
Pipeline parts. Welded taps made of carbon steel with an angle of 30 degrees on Ru to 64 kgf
MN 2878-62
MN 2878-62
Pipeline parts. Welded taps made of carbon steel with an angle of 45 degrees on Ru to 64 kgf
MN 2879-62
MN 2879-62
Pipeline parts. Welded taps made of carbon steel with an angle of 60 degrees on Ru to 64 kgf
MN 2880-62
MN 2880-62
Pipeline parts. Welded taps made of carbon steel with an angle of 90 degrees on Ru to 64 kgf
MN 3568-62
MN 3568-62
Bent bends, forged and stamped parts. Pipeline parts. Bent bends of carbon and alloy steel on Ru from 160 to 400 kgf/cm2
MN 3569-62
MN 3569-62
Bent bends, forged and stamped parts. Pipeline parts. Concentric transitions of carbon and alloy steel on Ru from 160 to 400 kgf/cm2
MN 3570-62
MN 3570-62
Bent bends, forged and stamped parts. Pipeline parts. Equal forged tees forged from carbon and alloy steel on Ru from 160 to 400 kgf / cm2
MN 3571-62
MN 3571-62
Bent bends, forged and stamped parts. Pipeline parts. Forged transition tees made of carbon and alloy steel on Ru from 160 to 400 kgf / cm2
MN 3572-62
MN 3572-62
Bent bends, forged and stamped parts. Pipeline parts. Transition fittings of carbon and alloy steel on Ru from 160 to 400 kgf/cm2, Du up to 25 mm
MN 3573-62
MN 3573-62
Bent bends, forged and stamped parts. Pipeline parts. Transition fittings made of carbon and alloy steel on Ru from 160 to 400 kgf/cm2, Du over 25 mm
MN 3574-62
MN 3574-62
Bent bends, forged and stamped parts. Pipeline parts. Welding plugs of carbon and alloy steel on Ru from 160 to 400 kgf / cm2
MN 3575-62
MN 3575-62
Bent bends, forged and stamped parts. Pipeline parts. Bends of carbon and alloy steel, steeply curved, with an angle of 90 degrees on Ru from 160 to 400 kgf/cm2...
MN 3576-62
MN 3576-62
Bent bends, forged and stamped parts. Pipeline parts. Bends of carbon and alloy steel, steeply curved, with an angle of 60 degrees on Ru from 160 to 400 kgf/cm2...
MN 3577-62
MN 3577-62
Bent bends, forged and stamped parts. Pipeline parts. Bends of carbon and alloy steel, steeply curved, with an angle of 45 degrees on Ru from 160 to 400 kgf/cm2
MN 3578-62
MN 3578-62
Bent bends, forged and stamped parts. Pipeline parts. Transitions concentric stamped from carbon and alloy steel on Ru from 160 to 400 kgf/cm2
MN 3579-62
MN 3579-62
Bent bends, forged and stamped parts. Pipeline parts. Transitions eccentric stamped from carbon and alloy steel on Ru from 160 to 400 kgf/cm2...
MN 3580-62
MN 3580-62
Bent bends, forged and stamped parts. Pipeline parts. Bends are steeply curved and transitions from carbon and alloy steel to Ru from 160 to 400 kgf/cm2. Technical requirements
MN 4008-62
MN 4008-62
Piping Components. Supports for Steel Pipelines, Welded-on, Fixed and Slip

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!