1967

RESET FILTERS    Category:   
Product Type:
GOST 13273-67
GOST 13273-67
Mineral water. Technical requirements
GOST 13274-67
GOST 13274-67
Stationery electric hot trays. Types. Basic parameters and dimensions
GOST 13275-67
GOST 13275-67
Reels for winding magnetic tape with a width of 6.25 mm
GOST 13276-67
GOST 13276-67
Fittings of overhead power lines and open switchgears. Technical requirements
GOST 13277-67
GOST 13277-67
Pasteurized cow milk butter
GOST 13278-67
GOST 13278-67
Dyes. Methods of comparative dyeing with leather dyes
GOST 13279-67
GOST 13279-67
Diethylamine hydrochloric acid
GOST 13281-67
GOST 13281-67
Semi-automatic machines with gear teeth. Standards of accuracy
GOST 13282-67
GOST 13282-67
Stabilitron of type SG1P for devices of broad application
GOST 13283-67
GOST 13283-67
Voltage regulation diode of type SG2P for devices of broad application
GOST 13284-67
GOST 13284-67
Salt for export. Packing, marking, transportation and storage
GOST 13288-67
GOST 13288-67
Cutters boring holding with a soldered fastening of diamond and angle fi = 45 degrees. Design and dimensions
GOST 13289-67
GOST 13289-67
Cutters boring holding with a soldered fastening of diamond and angle fi = 60 degrees. Design and dimensions
GOST 13290-67
GOST 13290-67
Cutters boring holding with mechanical fastening of diamond and angle fi = 45 °. Design and dimensions
GOST 13291-67
GOST 13291-67
Cutters boring holding with mechanical fastening of diamond and angle fi = 60°. Design and dimensions
GOST 13292-67
GOST 13292-67
Turning lathes with mechanical fastening of diamond and angle φi = 45 °. Design and dimensions
GOST 13293-67
GOST 13293-67
Turning lathes with mechanical fastening of diamond and angle of φ = 60 °. Design and dimensions
GOST 13294-67
GOST 13294-67
Turning boring lathes with soldered diamond for through holes. Design and dimensions
GOST 13295-67
GOST 13295-67
Turning boring lathes with soldered diamond for dead holes. Design and dimensions
GOST 13296-67
GOST 13296-67
Incisors turning latches resistant with mechanical fastening of diamond. Design and dimensions

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!