1969

RESET FILTERS    Category:   
Product Type:
GOST 14387-69
GOST 14387-69
Corner base with a height of 90 mm with an angle of 45 ° universally-assembled devices with grooves of 8 mm. Design and dimensions
GOST 14388-69
GOST 14388-69
Corner base with a height of 120 mm with an angle of 45 ° universally-assembled devices with grooves of 8 mm. Design and dimensions
GOST 14389-69
GOST 14389-69
Head scarves are the right universal-assembly devices with grooves of 8 mm. Design and dimensions
GOST 14390-69
GOST 14390-69
The headscarves are the left-hand universal-assembly devices with grooves of 8 mm. Design and dimensions
GOST 14391-69
GOST 14391-69
Conical mandrel with a flange of 60 mm in diameter with universal assemblies with grooves of 8 mm. Design and dimensions
GOST 14392-69
GOST 14392-69
Conical mandrel with flange diameter of 90 mm of universal-assembled devices with grooves of 8 mm. Design and dimensions
GOST 14393-69
GOST 14393-69
Gaskets square 30x30 mm of universal-assembly devices with grooves of 8 mm. Design and dimensions
GOST 14394-69
GOST 14394-69
Paddings are rectangular 22,5x30 mm of universal-assembly devices with grooves of 8 mm. Design and dimensions
GOST 14395-69
GOST 14395-69
Rectangular gaskets 30x45 mm with T-grooves of universal-assembled devices with grooves of 8 mm. Design and dimensions
GOST 14396-69
GOST 14396-69
Rectangular gaskets 30x45 mm with off-centered T-slots of universal assemblies with grooves of 8 mm. Design and dimensions
GOST 14397-69
GOST 14397-69
Paddings are rectangular 30x60 mm of universal-assembly devices with grooves of 8 mm. Design and dimensions
GOST 14398-69
GOST 14398-69
Gaskets round of universal-assembly devices with grooves of 8 mm. Design and dimensions
GOST 14399-69
GOST 14399-69
Gaskets T-shaped universally-assembled devices with grooves 8 mm. Design and dimensions
GOST 14400-69
GOST 14400-69
Installation gaskets T-shaped universal-assembly devices with grooves of 8 mm. Design and dimensions
GOST 14401-69
GOST 14401-69
Square padded universal-assembly devices with grooves of 8 mm. Design and dimensions
GOST 14402-69
GOST 14402-69
Lining square with threaded holes of universal-assembled devices with grooves of 8 mm. Design and dimensions
GOST 14403-69
GOST 14403-69
Paddings are rectangular 22,5x30 mm of universal-assembly devices with grooves of 8 mm. Design and dimensions
GOST 14404-69
GOST 14404-69
The rectangular lining is 30x45 mm with threaded holes of universal assemblies with grooves of 8 mm. Design and dimensions
GOST 14405-69
GOST 14405-69
Lining rectangular 30x45 mm with T-shaped grooves of universal-assembled devices with grooves 12 mm. Design and dimensions
GOST 14406-69
GOST 14406-69
Rectangular pads 30x45 mm with off-axis T-grooves of universal assemblies with grooves of 8 mm. Design and dimensions

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!