1971

RESET FILTERS    Category:   
Product Type:
OST 26-04-299-71
OST 26-04-299-71
Parts for the attachment of resistance thermometers on pipelines. Technical requirements
OST 26-04-301-71
OST 26-04-301-71
Adsorbers of separation units. Types and main parameters.
OST 26-04-302-71
OST 26-04-302-71
Bushings for outlet pipes through the housing. Design and dimensions
OST 26-04-303-71
OST 26-04-303-71
Thermostats for outlet pipe through the housing. Design and dimensions
OST 26-04-305-71
OST 26-04-305-71
Thermostats for outlet pipe through the housing. Design and dimensions
OST 26-04-307-71
OST 26-04-307-71
Side washers for outlet pipes through the housing. Design and dimensions
OST 26-04-308-71
OST 26-04-308-71
Air separation plants. Outlet pipes through the housing. Technical requirements
OST 26-04-312-71
OST 26-04-312-71
Oxygen equipment. Methods for degreasing. Materials used
OST 26-04-340-71
OST 26-04-340-71
Gas generators, cold, and cryogenic tankers. The main parameters
OST 26-04-371-71
OST 26-04-371-71
Piston pumps for liquefied gases. General specification
OST 26-05-349-71
OST 26-05-349-71
Typical connection of mixer chambers with the body of the burner G2. Design and dimensions
OST 26-05-351-71
OST 26-05-351-71
Acetylene filling ramps. Collector. Design and dimensions
OST 26-06-290-71
OST 26-06-290-71
Three-screw pumps. Design and dimensions. The unified assembly units and parts. Specifications for the manufacture
OST 26-06-356-71
OST 26-06-356-71
Sealed pumps. The active part of the electric motors at 3000 RPM. Parameters
OST 26-06-357-71
OST 26-06-357-71
Sealed pumps. The active part of the electric motors at 3000 RPM. Technical requirements
OST 26-06-358-71
OST 26-06-358-71
Sealed pumps. The active part of the electric motors at 3000 RPM. Design and dimensions
OST 26-07-237-71
OST 26-07-237-71
Flanges without lug steel alloy butt welded at PN from 1 to 40 kgf/cm2. Design and dimensions
OST 26-07-238-71
OST 26-07-238-71
Flanges with connecting lug, cast steel, butt welded for Pi from 1 to 64 kgs/cm2. Design, dimensions and technical requirements.
OST 26-07-239-71
OST 26-07-239-71
Steel flanges with ledge or depression, cast welded butt joint on Roux from 1 to 64 kgf / cm2. Design, dimensions and Technical requirements .
OST 26-07-240-71
OST 26-07-240-71
cast steel Flange with a pin or groove weld butt joint on Roux from 1 to 64 kgf / cm2. Design, dimensions and Technical requirements .

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!