1972

RESET FILTERS    Category:   
Product Type:
OST 1-41184-72
OST 1-41184-72
Testing of hydro-gas systems for their leak proofness. Calibration methods for test furnace concerning gas bubbles in the liquid.
OST 1-41185-72
OST 1-41185-72
Disk compressor rotor with front teeths.
OST 1-41186-72
OST 1-41186-72
Welding argon-arc of straight-line-seam pipes from titanic alloys. Standard technological process.
OST 1-41191-72
OST 1-41191-72
Radiographic examination of welded pipes. Radiographic scheme for butt joints with peeled off support.
OST 1-41192-72
OST 1-41192-72
Radiographic examination of welded pipes. Radiographic scheme for interlocks.
OST 1-41199-72
OST 1-41199-72
Gas cementation in RX atmosphere containing additives of natural urban gas.Typical technological process.
OST 1-41203-72
OST 1-41203-72
Slot rolling for rubber sealing rings. Typical technological process.
OST 1-41205-72
OST 1-41205-72
Soldering of tyres of electrical machines by low temperature soldering allows. Typical technological process.
OST 1-41206-72
OST 1-41206-72
Flame soldering of bandages of electric cars with high-temperature self-fluxing solders. Typical process.
OST 1-41207-72
OST 1-41207-72
Induction brazing of bandages of electric cars with high-temperature self-fluxing solder alloy. Typical process.
OST 1-41208-72
OST 1-41208-72
Cell filler. Degreasing foil from alloys AMG2N and A5T in a solution of OL-7. Typical process
OST 1-41209-72
OST 1-41209-72
Method of calculating the EDM firmware holes with a diameter of less than 1 mm.
OST 1-41257-72
OST 1-41257-72
Installation of rubber piston on the holes contour of carcass. Typical operation of technological processes.
OST 1-41258-72
OST 1-41258-72
Laying of electric cable or cable along the highway. Typical process operation
OST 1-41259-72
OST 1-41259-72
Banding electric wiring harnesses by means of strings. Typical procedure of technological process.
OST 1-41260-72
OST 1-41260-72
Wrapping electric wiring harness. Typical operation of the process.
OST 1-41261-72
OST 1-41261-72
Protection of electric cables passing in areas with high temperature (above plus 200 degrees C). Typical process operation
OST 1-41262-72
OST 1-41262-72
Fastening of an electric bundle or cable to the frame with a clamping yoke with laying. Typical process operation
OST 1-41263-72
OST 1-41263-72
Fastening electrical wiring harness to engine mounting pipe using suspension clip. Typical technological process operation.
OST 1-41264-72
OST 1-41264-72
Fastening wires, harnesses and cables with clip yokes fixed to the frame. Typical technological process operation.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!