1972

RESET FILTERS    Category:   
Product Type:
OST 24.797.12-72
OST 24.797.12-72
Spring washers. Design and dimensions (restriction as per GOST 6402-70).
OST 24.797.13-72
OST 24.797.13-72
Angle washers. Design and dimensions (restriction as per GOST 10906-66).
OST 24.797.14-72
OST 24.797.14-72
Marine Square Washers for wood. Design and dimensions (restriction as per GOST 7735-55).
OST 24.797.15-72
OST 24.797.15-72
Toothed washers. Design and dimensions (restriction as per GOST 11872-66).
OST 24.797.16-72
OST 24.797.16-72
Lock washers with bucket. Design and dimensions (restriction as per GOST 13465-68).
OST 24.797.17-72
OST 24.797.17-72
Lock washers with tab. Design and dimensions (restriction as per GOST 13463-68).
OST 24.825.01-72
OST 24.825.01-72
Hydraulic cylinders for nominal pressure 10 MN/m2 (100 kgf/sq.cm)
OST 24.838.11-72
OST 24.838.11-72
Continuous blowdown separators of nominal diameter 300. Design and technical requirements.
OST 24.844.01-72
OST 24.844.01-72
Industry gas turbines and compressed-air plants. Cylindrical bearing . Types. Dimension types. Technical requirements.
OST 24.850.01-72
OST 24.850.01-72
Framed board wooden boxes for lading weight over 500 and 20000 kg. Design of boxes and boards. General technical specifications.
OST 24.957.01-72
OST 24.957.01-72
Cropping dies with wedged clamp for pipes with diameters from 8 to 20 mm. Design and dimensions.
OST 24.957.02-72
OST 24.957.02-72
Cropping dies with wedged clamp for pipes with diameters from 8 to 60 mm. Design and dimensions.
OST 24.957.03-72
OST 24.957.03-72
Cropping dies with differentiated clamp for pipes with diameters from 8 to 60 mm. Design and dimensions.
OST 24.957.04-72
OST 24.957.04-72
Cropping dies with replaceable bush cutters for rods with diameters from 8 to 40 mm. Design and dimensions.
OST 24.957.05-72
OST 24.957.05-72
Cropping dies with differentiated clamp for rods with diameters from 8 to 40 mm. Design and dimensions.
OST 24.957.06-72
OST 24.957.06-72
Cropping multiple-impression dies for rods with diameter up to 16. Design and dimensions .
OST 24.969.01-72
OST 24.969.01-72
Pouring gate system for casting of steam turbine cast-iron diaphragms. Design and dimensions.
OST 25-104-72
OST 25-104-72
electronic Devices for software control of machine tools. General technical requirements. Test methods.
OST 25-163-72
OST 25-163-72
Pressure gauges, vacuum gauges, manometric thermometers SSI. Technical requirements for external vibration impact. Testing methods.
OST 26-01-385-72
OST 26-01-385-72
Clamps. Design and dimensions

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!