1972

RESET FILTERS    Category:   
Product Type:
OST 4-G0.023.001-72
OST 4-G0.023.001-72
Material PENDT
OST 4-G0.023.055-72
OST 4-G0.023.055-72
High-density polyethylene ( limitation GOST 16338-70)
OST 4-G0.023.056-72
OST 4-G0.023.056-72
Low-density polyethylene ( limitation GOST 16337-70)
OST 4-G0.028.000-72
OST 4-G0.028.000-72
Thermal indicators of melting. Basic properties and use
OST 4-G0.029.002-72
OST 4-G0.029.002-72
Organic insulating materials. Selection guide for use in the conditions of influence of ionizing radiation
OST 4-G0.029.003-72
OST 4-G0.029.003-72
Polymeric materials for sealing of products of radio-electronic equipment. Basic properties and use
OST 4-G0.050.180-72
OST 4-G0.050.180-72
Graded guide bushings. Construction and dimensions
OST 4-G0.054.047-72
OST 4-G0.054.047-72
Preservation of radio-electronic equipment mounted in bodies
OST 4-G0.054.053-72
OST 4-G0.054.053-72
Hybrid integrated circuits of microwave range. Installation of hinged elements on the microstrip boards. Typical technological processes
OST 4-G0.054.054-72
OST 4-G0.054.054-72
Hybrid integrated circuits of microwave range. Microstrip boards
OST 4-G0.054.055-72
OST 4-G0.054.055-72
POLAST material. Typical technological production process
OST 4-G0.054.056-72
OST 4-G0.054.056-72
PENDT material. Typical technological production process
OST 4-G0.054.057-72
OST 4-G0.054.057-72
Grinding, sharpening and finishing of precision cutting tool with a surface roughness of 9-12 grades
OST 4-G0.054.058-72
OST 4-G0.054.058-72
Printed boards. Typical technological processes
OST 4-G0.054.060-72
OST 4-G0.054.060-72
Toothed, cylindrical, fine-grained wheels made of pressed wood mass MDPK-A. Typical technological processes
OST 4-G0.054.061-72
OST 4-G0.054.061-72
Micromodules of planar structure. Typical technological processes
OST 4-G0.054.062-72
OST 4-G0.054.062-72
Metallic and non-metallic (inorganic)coatings. SilveringĀ of elements of high frequency tracts made of titanium alloys. Technological process
OST 4-G0.059.048-72
OST 4-G0.059.048-72
Molds for pressure casting of products from non-ferrous alloys. Packets. Types and basic dimensions
OST 4-G0.059.167-72
OST 4-G0.059.167-72
Molds for pressing the products from thermosets. Heating slabs (assembly units, blanks). Construction and dimensions
OST 4-G0.059.168-72
OST 4-G0.059.168-72
Molds for pressing the products from thermosets. Holders (blanks). Construction and dimensions

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!