1974

RESET FILTERS    Category:   
Product Type:
OST 1-4-1559-74
OST 1-4-1559-74
Seal the wires in the special ends with cold compression on the core and on the insulation. Typical process operation
OST 1-41559-74
OST 1-41559-74
Seal the wires in the special ends with cold compression on the core and on the insulation. Typical process operation
OST 1-41560-74
OST 1-41560-74
Sealing of wires into special lugs with cold compression followed by soldering. Typical operation of technological process.
OST 1-41561-74
OST 1-41561-74
Typical operation of the process of sealing electrical wiring in the lugs. Main provisions
OST 1-41562-74
OST 1-41562-74
Sealing of wires into lugs 6383A with soldering. Typical operation of technological process.
OST 1-41563-74
OST 1-41563-74
Sealing of wires into lugs 6384A, 6385A with soldering. Typical operation of technological process.
OST 1-41564-74
OST 1-41564-74
Sealing of wires into lugs 6384A, 6385A with cold compression followed by soldering. Typical operation of technological process.
OST 1-41565-74
OST 1-41565-74
Sealing of wires into side lugs 6386A with cold compression followed by soldering. Typical operation of technological process.
OST 1-41566-74
OST 1-41566-74
Sealing of wires into nut lugs 6387A with soldering. Typical operation of technological process.
OST 1-41567-74
OST 1-41567-74
Sealing of wires tubular lugs 6196C55, 6210C55 with soldering. Typical operation of technological process.
OST 14-7-74
OST 14-7-74
Products development and launching into manufacture. Ferrous metal industry products.
OST 1-51784-74
OST 1-51784-74
Smooth plug gauges for tapping holes for tapping (AO3 tolerance range) in materials of normal viscosity. Design and dimensions
OST 1-51785-74
OST 1-51785-74
Plain plug gauges for holes for threading with interference (tolerance margin A03) in materials with high viscosity. Design and dimensions.
OST 1-51786-74
OST 1-51786-74
Plain plug gauges for holes for threading with interference (tolerance margin A02) in materials with normal viscosity. Design and dimensions.
OST 1-51787-74
OST 1-51787-74
Smooth plug gauges for tapping holes for tapping (AO2 tolerance range) in high viscosity materials. Design and dimensions
OST 1-51788-74
OST 1-51788-74
Plain snap gauges for rods to cut threads with interference (tolerance margins T02 and T03) of materials with normal viscosity. Design and dimensions.
OST 1-51789-74
OST 1-51789-74
Smooth calibers for rods for tapping with tightness (tolerance fields TO2 and TO3) of high viscosity materials. Design and dimensions
OST 1-51790-74
OST 1-51790-74
Regulated plain stem clips for thread rolling with tension ( Т02 and Т03 tolerance ranges). Construction and dimensions. Limits.
OST 1-51791-74
OST 1-51791-74
Working thread plug gauges Р-P to control the average thread diameter. Design and dimensions.
OST 1-51792-74
OST 1-51792-74
Countergages – threaded rings of К-P type for plugs of Р-Р type. Design and dimensions.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!