1974

RESET FILTERS    Category:   
Product Type:
OST 70.0001.066-74
OST 70.0001.066-74
Quick-detachable washers. Design and dimensions (restriction as per GOST 4087-69).
OST 70.0001.068-74
OST 70.0001.068-74
Rectangular machine plates (restrictions imposed by GOST 12971-67).
OST 70.0001.069-74
OST 70.0001.069-74
Cylindrical pins. Specifications (restriction as per GOST 3128-70).
OST 70.0001.070-74
OST 70.0001.070-74
Cogwheels. Modules (limitation under GOST 9563-60).
OST 70.0001.071-74
OST 70.0001.071-74
Tolerances for hole axes arrangement in fixings (limitations under GOST 14140-68).
OST 70.0001.074-74
OST 70.0001.074-74
Round head screws (normal accuracy). Construction and dimensions (limitation under GOST 17473-72).
OST 70.0001.075-74
OST 70.0001.075-74
Setscrews with a cone point. Dimensions (limitation under GOST 1476-64).
OST 70.0001.076-74
OST 70.0001.076-74
Cheese-head screws (normal accuracy). Construction and dimensions (limitation under GOST 1491-72).
OST 70.0001.077-74
OST 70.0001.077-74
Flat-dog point setscrews. Dimensions (limitation under GOST 1478-64).
OST 70.0001.081-74
OST 70.0001.081-74
Compression screws with a hexagon head and an end for a pivot for machine tools (limitation under GOST 13435-68).
OST 70.0001.082-74
OST 70.0001.082-74
Thread plugs. Design and dimensions (restriction as per GOST 12202-66).
OST 70.0001.083-74
OST 70.0001.083-74
Ears for machine tools devices. Design and dimensions (restriction as per GOST 4739-68)
OST 70.0001.084-74
OST 70.0001.084-74
Shoulder-head bushings for clamps and positioning bolts. Construction and dimensions (limitation under GOST 12214-66).
OST 70.0001.085-74
OST 70.0001.085-74
Alignment pins. Design and dimensions (restriction as per GOST 12213-66).
OST 70.0001.086-74
OST 70.0001.086-74
Cylindrical fixed adjusting pins. Design and dimensions (restriction of GOST 12209-66).
OST 70.0001.087-74
OST 70.0001.087-74
Shear constant installation pins. Design and dimensions (restriction of GOST 12210-66).
OST 70.0001.088-74
OST 70.0001.088-74
Star-shaped handles for machine retaining devices. Design and dimensions (restriction as per GOST 4742-68).
OST 70.0001.089-74
OST 70.0001.089-74
Thin slotted and castellated hex nuts (normal accuracy). Construction and dimensions (limitation under GOST 5919-73).
OST 70.04.01-74
OST 70.04.01-74
Cylindrical thread steel pipe joint sleeves of Рy=16 kgf/cm2. Check nuts. Basic dimensions (restrictions imposed by GOST 8968-59).
OST 70.04.02-74
OST 70.04.02-74
Cylindrical thread malleable cast iron fittings. Square elbows. Construction and dimensions (restrictions imposed by GOST 8946-59).

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!