1975

RESET FILTERS    Category:   
Product Type:
GOST 21059.1-75
GOST 21059.1-75
Picture tubes for TV. Methods for measurement of screen brightness and uniformity of screen brilliancy
Price: $151.00
GOST 21059.2-75
GOST 21059.2-75
Kinescopes for black-and-white and colour television. Methods for determination of gassing coefficient
Price: $168.00
GOST 21059.3-75
GOST 21059.3-75
Colour television picture tubes. Method for determination of value gamma
Price: $101.00
GOST 21060-75
GOST 21060-75
Air-dried silkworm cocoons. Specifications
GOST 21061-75
GOST 21061-75
Alive silkworm cocoons. Specifications
GOST 21062-75
GOST 21062-75
Transmitters marine single-band. The main parameters. Technical requirements
GOST 21063-75
GOST 21063-75
Navigating equipment for ships and vessels. Terms and definitions
GOST 21064-75
GOST 21064-75
Paint and lacquer materials. The method of testing coatings for resistance to the action of mineral oil and gasoline
GOST 21065-75
GOST 21065-75
Paint and lacquer materials. Method for testing coatings for resistance to water and salt solutions
GOST 21066-75
GOST 21066-75
Turning cutters combined with mechanical fastening of polyhedral carbide plates with diameters of circumscribed circle D = 14, 18, 22 and 26 mm. Design and dimensions
GOST 21067-75
GOST 21067-75
Turning cutters combined with mechanical fastening of polyhedral carbide plates with diameters of circumscribed circle D = 14, 18, 22 and 26 mm. Technical requirements
GOST 21068-75
GOST 21068-75
Carbide-tipped plates with diameters of the circumscribed circle D = 14, 18, 22 and 26 mm, mechanically fixed for lathe incisors. Classification. Designation system. Shapes
GOST 21069-75
GOST 21069-75
Solid hard alloy plates of irregular triangle shape with a hole and fluting grooves on one side with diameters of the circumscribed circle D = 14, 18, 22 and 26 mm mechanically fixed for turning tools. Design and dimensions
GOST 21070-75
GOST 21070-75
Solid hard alloy plates of square shape with a hole and fluting grooves on one side with diameters of the circumscribed circle D = 14, 18 and 22 mm mechanically fixed for turning tools
GOST 21071-75
GOST 21071-75
Solid hard alloy plates of pentagon shape with a hole and fluting grooves on one side with diameters of the circumscribed circle D = 18, 22 and 26 mm mechanically fixed for turning tools. Design and dimensions
GOST 21072-75
GOST 21072-75
Solid hard alloy plates of hexagonal shape with a hole and fluting grooves on one side with diameters of the circumscribed circle D = 18, 22 and 26 mm mechanically fixed for turning tools. Design and dimensions
GOST 21073.0-75
GOST 21073.0-75
Non-ferrous metals. Determination of grain size. General requirements
Price: $151.00
GOST 21073.1-75
GOST 21073.1-75
Non-ferrous metals. Determination of grain size by comparison with microstructure scale
Price: $118.00
GOST 21073.2-75
GOST 21073.2-75
Non-ferrous metals. Determination of grain size by grain calculation method
Price: $68.00
GOST 21073.3-75
GOST 21073.3-75
Non-ferrous metals. Determination of grain size by calculation of grain intersections
Price: $51.00

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!