1977

RESET FILTERS    Category:   
Product Type:
OST 1-03864-77
OST 1-03864-77
Semiconductor temperature sensors. Types, basic parameters and technical requirements.
OST 1-03865-77
OST 1-03865-77
Small capacity cylinders reinforced with fiberglass. Types and basic parameters, technical requirements
OST 1-03866-77
OST 1-03866-77
Luggage bags for documentation. Types and main parameters.
OST 1-03867-77
OST 1-03867-77
Termination of electrical wires I n the electrical connector contacts with compression. Types and basic dimensions, technical requirements.
OST 1-03871-77
OST 1-03871-77
Fuel flow meters for flight tests. Types and basic parameters, technical requirements
OST 1-03872-77
OST 1-03872-77
Remote relay-controlled electro-hydraulic systems with hydraulic dual-motor drives. Types and basic parameters. Technical specifications.
OST 1-03874-77
OST 1-03874-77
Embedding the on-board electrical wire of the BSA brand into the lugs using the crimp method. Types, main dimensions and technical requirements
OST 1-03875-77
OST 1-03875-77
Shuttle valves for brake pneumatic systems. Types, basic parameters and technical requirements
OST 1-03876-77
OST 1-03876-77
Loading blocks. Types and basic parameters, technical requirements
OST 1-03877-77
OST 1-03877-77
Parachute links. Types and basic parameters, technical requirements
OST 1-03881-77
OST 1-03881-77
Hydraulic lock. Types and basic dimensions, technical requirements.
OST 1-03883-77
OST 1-03883-77
Sinks. Types and main dimensions, technical requirements
OST 1-03885-77
OST 1-03885-77
Mass flowmeters with current drive. Types, main parameters and specifications.
OST 1-03886-77
OST 1-03886-77
Air conditioning systems for protective equipment. Types and basic parameters, technical requirements
OST 1-03888-77
OST 1-03888-77
Mooring straps. Types, basic parameters and technical requirements
OST 105-005-77
OST 105-005-77
General Specifications. Rules for the structure and presentation.
OST 105-010-77
OST 105-010-77
Industry-based standardization system. Procedure for implementation and institutional inspection for implementation and compliance of standard technical and managing regulatory documents.
OST 105-206-77
OST 105-206-77
Safety valves. Technical conditions.
OST 105-230-77
OST 105-230-77
Caps with recess for cup seal with 72 -100 mm diameter. Types and main dimensions.
OST 105-281-77
OST 105-281-77
Shouldered shanks for sheet stamping dies. Design and dimensions (restriction as per GOST 16715-71).

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!