1977

RESET FILTERS    Category:   
Product Type:
OST 11-OD0.397.021-77
OST 11-OD0.397.021-77
Pulse mode Q-switched mode solid-state lasers and emitters (YAG). Method of measuring pulse repetition frequency of the laser radiation.
OST 11-OD0.397.022-77
OST 11-OD0.397.022-77
Lasers and solid state emitters (on an yttrium-aluminum garnet) pulsed mode with Q-switching. Method for measuring the duration of a laser pulse
OST 11-OD0.397.025-77
OST 11-OD0.397.025-77
See the book of state registration
OST 11-OD0.418.002-77
OST 11-OD0.418.002-77
Paperboard consumption containers for gas-discharge ionizing radiation counters. Technical specifications.
OST 11-OD0.730.003-77
OST 11-OD0.730.003-77
Vitrified cap-terminals for electron-beam equipment. Technical conditions.
OST 11-OD0.730.010-77
OST 11-OD0.730.010-77
Electronic amplifier, rectifier, and oscillator tubes for devices of specialized application (ОС) with anode dissipated power up to 25 W (OS). Cathode heaters. Specifications.
OST 12.44.003-77
OST 12.44.003-77
Rubber and plastic cleaners for hydraulic cylinders. Specifications.
OST 12.44.019-77
OST 12.44.019-77
Annular rubber rings of round cross section with protective rings for hydraulic and pneumatic devices. Specifications (limitation under GOST 9833-73 and GOST 18829-73).
OST 12.44.022-77
OST 12.44.022-77
Rubber seals with protective rings for hydraulic equipment. Specifications.
OST 12.44.028-77
OST 12.44.028-77
Determination of standardization level and unification of products.
OST 12.44.037-77
OST 12.44.037-77
dustproof rotating shaft seals. Specifications.
OST 1-30006-77
OST 1-30006-77
The cores of the bolt-rivets without a technological shank with a flat-rounded head with a special transition fit. Design and dimensions
OST 1-30008-77
OST 1-30008-77
The cores of the bolt-rivets without technological shank with a flat-rounded head with a fit with 3A. Design and dimensions
OST 1-30010-77
OST 1-30010-77
The cores of the bolt-rivets without technological shank with a countersunk head angle of 90 degrees with a special transition fit. Design and dimensions
OST 1-30012-77
OST 1-30012-77
Shankless countersunk head lock bolts at the angle of 90 degrees and driving of ZA (3А) type. Construction and dimensions.
OST 1-30014-77
OST 1-30014-77
The cores of the bolt-rivets without technological shank with a countersunk head angle of 120 degrees with a special transition fit. Design and dimensions
OST 1-30016-77
OST 1-30016-77
Shankless countersunk head lock bolts at the angle of 120 degrees and driving of ZA (3А) type. Construction and dimensions.
OST 1-30018-77
OST 1-30018-77
Knurled ring for steel rod bolt rivets without technological taper shank. Dimensions.
OST 1-30019-77
OST 1-30019-77
Knurled ring for titanium alloy rod bolt shank rivets without technological taper shank. Dimensions.
OST 1-30020-77
OST 1-30020-77
High lock connection without technological shank end.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!