1978

RESET FILTERS    Category:   
Product Type:
OST 17-743-78
OST 17-743-78
Cotton fabrics. Tented and raincoat fabrics. Gray fabrics. Technical conditions.
OST 17-745-78
OST 17-745-78
Main parameters of universal pinched tucks.
OST 17-748-78
OST 17-748-78
Embroidery cotton canvas. Assortment and technical requirements.
OST 17-749-78
OST 17-749-78
Hibulk acrylic yarn. Specifications.
OST 17-780-78
OST 17-780-78
Double-plate jacquard carpets. General specification
OST 17-ED1-732-78
OST 17-ED1-732-78
Coils for textile machines.
OST 1-80239-78
OST 1-80239-78
Filling of device assemblies with epoxy compounds. Typical technological processes.
OST 1-80284-78
OST 1-80284-78
Electrochemical polishing of stainless steel devices in cold electrolyte. Typical process
OST 1-80292-78
OST 1-80292-78
Twisted tape magnetic cores. Typical technological processes
OST 1-80295-78
OST 1-80295-78
Assembling electric micromachines on thermal compensating mandrels. Typical process
OST 1-80310-78
OST 1-80310-78
Casting lead cargo. Typical process
OST 1-80314-78
OST 1-80314-78
Round-rolled dies. Typical process
OST 1-80337-78
OST 1-80337-78
Sectoral uniformity measurement system. Instruments for monitoring air dust. Type PKZV. Methods and means of verification
OST 1-80338-78
OST 1-80338-78
Boring contour cut-in bit with mechanical mounting of core parallel middle bodies made of hard alloys. Bore diameter from 2 (up to 3) mm. Design and dimensions.
OST 1-80339-78
OST 1-80339-78
Cutter boring contour-cut-in with mechanical fastening of rod cylindrical inserts made of hard alloy. Diameter of boring is from 3 (to 4) mm. Design and dimensions
OST 1-80340-78
OST 1-80340-78
Cutter boring contour-cut-in with mechanical fastening of rod cylindrical inserts made of hard alloy. Diameter of boring is from 4 (to 6) mm. Design and dimensions
OST 1-80341-78
OST 1-80341-78
Cutter boring contour-cutting with mechanical fastening of cylindrical composite inserts of solid alloy lateral thrust. Diameter of boring is from 6 (to 10) mm. Design and dimensions
OST 1-80342-78
OST 1-80342-78
Cutter boring contour-cutting with mechanical fastening of cylindrical inserts made of hard alloy. Diameter of boring is from 10 (to 18) mm. Design and dimensions
OST 1-80343-78
OST 1-80343-78
Cutter boring contour-cutting with mechanical fastening cylindrical composite inserts of hard alloy. Diameter of boring from 18 mm. Design and dimensions
OST 1-80344-78
OST 1-80344-78
Cutters boring. (Diameter of boring from 24 mm). Both external cutting and face with mechanical fastening of cylindrical composite inserts from a firm alloy. Design and dimensions

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!