1981

RESET FILTERS    Category:   
Product Type:
OST 1 42118-81
OST 1 42118-81
Technological documents execution rules for assembly work.
OST 1 52491-81
OST 1 52491-81
Double-sided spanner wrenches. Design and dimensions.
OST 1 52492-81
OST 1 52492-81
Socket wrenches with external square. Design and dimensions.
OST 1 52497-81
OST 1 52497-81
Lightweight socket wrenches with internal hexagon. Design and dimensions.
OST 1 52498-81
OST 1 52498-81
Two-sided socket wrenches. Design and dimensions.
OST 1 52507-81
OST 1 52507-81
Spring grabbing device. Type 1. Design and dimensions.
OST 1 52517-81
OST 1 52517-81
Interchangeable heads with an open-end. Construction and dimensions.
OST 1 52519-81
OST 1 52519-81
Fitting and assembly tools. General technical requirements.
OST 1 76765-81
OST 1 76765-81
Air portable tools. Angle nozzles. DESIGN and dimensions.
OST 1 80045-81
OST 1 80045-81
Wire precision potentiometers. Output non-electrical parameters inspection methods.
OST 1 80053-81
OST 1 80053-81
Standards of consumption of tin-lead solders and fluxes.
OST 1 80060-81
OST 1 80060-81
Cutting down and punching of sheet metal parts using polyurethane. Typical process.
OST 1 80083-81
OST 1 80083-81
Extruding dies. Design and dimensions.
OST 1 80084-81
OST 1 80084-81
Extruding dies. Typical technological process.
OST 1 80353-81
OST 1 80353-81
Vacuum and gas-filled asynchronous gyro units. Requirements for technologically typical structures and rules of their maintenance.
OST 1 80359-81
OST 1 80359-81
Electrical micromachine windings trickle impregnation by АС-9115 varnish without solvent. Typical technological process.
OST 1 80420-81
OST 1 80420-81
Thermal treatment of cast permanent magnets. Typical process.
OST 1 80454-81
OST 1 80454-81
Spot contact welding of elastic sensitive elements of copper alloy devices. Seams of welded connections. Types and main dimensions.
OST 1 80462-81
OST 1 80462-81
Electronic devices on integrated circuits. Requirements to manufacturability of typical structures and rules for their support in the design.
OST 1 80463-81
OST 1 80463-81
Beryllium and its alloys. Cutting tool geometry during turning operation.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!