Search Term: heating

Heating boilers. Part 7. Boilers with gas burners with forced supply of combustion air for central heating with a rated heat output of not more than 1000 kW. Technical requirements and test methods

Heating - internal devices (edition 2000). Heating - internal devices. State elemental estimated standards for construction work

Noise reduction system of air heating, ventilating and air conditioning. Rules of design

Integral assessment of the heating microclimate

Heating devices. General specifications

Design and installation of domestic water and heating systems in buildings using tubes of "cross-linked" polyethylene

Heating, ventilation, air conditioning systems. Terms and definitions

The water supply and heating interior buildings systems cross-linked polyethylene pipes. The rules of design and installation

Instructions on the rationing of the consumption of heat energy for heating industrial buildings

Gas-fired mixing air heaters for heating greenhouses and similar non-domestic spaces

Safety of household and similar electrical appliances. Particular requirements for appliances for heating liquids and test methods

Water floor heating and cooling systems for residential, public and industrial buildings

Procedural Guidelines for the Prevention of Low-Temperature Corrosion of Boiler Heating Surfaces and Gas Flues

Cast iron heating radiators. Specifications

Heating convectors. Specifications

Gas fired central heating boilers. Type B boilers of nominal heat input not exceeding 300 kW, but not exceeding 1000 kW

Recommended Management and Procedural Practice for Preparation for the Heating Seasons and Improving the Reliability of Public Piped Heat Supply Systems in Cities and Populated Areas in the Russian Federation

Autonomous heat generating stations with gas small-sized heating units. Ryazan Oblast

Procedural Guidelines for Heating Tests of Generators

Heating hot-water boilers with capacity from 0,1 to 4,0 MW. General specifications

Air conditioning, ventilating and heating systems for shipboard use. Design characteristics of air and design temperature of sea water

Instructions for operation of infield thermally insulated oil pipelines with electric track heating in conditions of the Mangyshlak

Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials

Instructions for the design and construction of ductless heating networks of asbestos-cement pipes

Stationary steam boilers. Selection and calculation of nozzle devices of blowing devices for heating surfaces of boiler units

Safety in electroheat installations. Part 6. Specifications for safety in industrial microwave heating equipment

Heating devices. General specifications

Instructions for the design and construction of ductless heating networks of asbestos-cement pipes

Product-quality index system. Hot-water heating boilers with capacity up to 100 kW. Nomenclature of indices

Houses. Method for determination of specific heat consumption for building heating

Building heating systems. Method for calculating energy characteristics and system performance indicators. Part 3-3. Hot water systems, heat production

Method of accounting for scaling when calculating the strength of the elements of the heating surfaces of steam boilers

Air conditioners with air cooling and air-to-air heat pumps. Methods of testing and calculating the seasonal efficiency coefficient. Part 2. Seasonal coefficient of heating efficiency

Method for calculating the parameters of pumping high-viscosity oil through a pipeline with track heating

Procedural Guidelines for Organization of Maintenance Heating Surfaces of Thermal Power Station Boilers

Air conditioners, liquid chillers and heat pumps with electric compressors for heating and cooling rooms. Partial load testing and evaluation and seasonal performance calculation

Gas-fired central heating boilers. Type C boilers of nominal heat input not exceeding 70 kW

Heating, Ventilating, and Air-Conditioning Systems

Pipe elements of heating surfaces, connecting pipes within a boiler and a drum of stationary boilers. General technical requirements for manufacture

Houses. Method for determination of specific heat consumption for building heating

Gas-fired central heating boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW. Safety requirements and test methods

Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003

Gas heating carpeting equipment. Part 2-2. Specific requirements. Ovens

Building heating systems. Method for calculating energy characteristics and system performance indicators. Part 3-2. Hot water distribution systems

Autonomous heat generating stations with gas compact heating units

Quality rating system. Building. Heating apparatus. Nomenclature of characteristics

Safety of household and similar electrical appliances. Part 2-71. Particular requirements electrical heating appliances for breeding and rearing animals

Typical details of a non-channel heating network laying from pipes with polyurethane foam insulation in a polyethylene sheath

Guidelines for testing water heating networks for the calculated temperature of the coolant

St. Petersburg The device of heating networks in St. Petersburg

Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heating. Part 1. General and testing requirements

Low-power electronic tubes. Test methods for multiple switching on and switching off the heating voltage

Procedural Guidelines for Magnetic Inspection of Metal Tubes of Heating Surfaces in Electric Power Generating Station Boilers

Electrical room heating appliances of accumulating type. Functional characteristics measuring methods

Internal buildings and structures utilities. Recommendations for testing and adjusting systems of heating, heat supplying and cooling

State system for ensuring uniformity of measurements. Thermal energy of open water heating systems, received by the consumer. Measurement Technique

Resistance furnaces for heating and thermal processing aluminium and its alloys. Specific energy consumption

Residential and public buildings. Evaluation of heat consumption for heating and ventilation

Per-apartment heating system

Recommendations for managing the heat supply of large cities in heating seasons. (Highlights)

Buildings for residential and public use. Evaluation of heat consumption for heating and ventilation

Apartment heating units in multicompartment buildings. Regulations of design

Conditional graphics in projects of heating, ventilation, air conditioning and heat and cold supply

Safety in electroheat installations. Part 2. Particular requirements for resistance heating equipment

Balancing valves for heating, heating, cooling and hot water internal systems. General technical conditions

GSE. Consumption and mass of water. Measurement methods at the metering station "Heating route heating of the settlement of CHP-1-return pipeline (from the consumer)" JV "Komsomolskaya CHP-2" JSC "DGC" branch "Khabarovsk generation

Building of growing and fattening of 200 heads of young cattle per year (for subsidiary farms of enterprises) in local building materials. Album 2 Mechanical and technological solutions. Internal water supply and sewage. Heating and ventilation. Power supply and electrical equipment. Automation of heating and ventilation.

Heating boilers. Part 3. Gas-fired central heating boilers. Assembly comprising boiler body and a forced draught burner. Testing of heat engineering

Procedural Guidelines for Testing Piped Hot Water Heat Supply Networks for Hydraulic Losses Without Disruption of Operation

Equipment electric furnace devices. Part 1. Design and installation requirements

Collection 16. Internal pipelines (2020). Federal unit rates for construction work

Gas heating device with water circuit and flow water heating AOGVN-17, 4

Thermal solar systems and components. Solar collectors. Factory made systems. Part 1. General requirements

Heating boilers, hot-water, steel, heating capacity to 85 kW. Specification

Album 1. Explanatory note. Internal gas supply. Sketch drawings of general views of atypical structures of the gas supply system internal. Architectural and structural solutions. Heating and Ventilation. Sketch drawings of the general views of the atypical structures of the heating and ventilation systems. Automation. Sketch drawings of general views of non-standard structures of the automation system. Electric lighting. Communications .

Album II. Internal water supply and sewerage. Heating and ventilation. Thermomechanical part. Electric lighting and power electrical equipment. Automation of heating and ventilation systems. Automation of thermomechanical processes

Plastic paper-laminated heating (elements of heating sloterm)

Methods of measuring the amount of electricity and power using the system of automated information-measuring commercial metering of electricity of JSC Ural Heating Network Company branch Chelyabinsk Heating Networks

Boilers, type heating water-heating steel with a heating capacity of 16 KW

Heat supply of buildings. Method for calculation of energy requirements and efficiencies for of heat generation with heat pump systems

Conformity assessment. Certification rules for heating radiators and heating convectors

Sanitary-technical equipment of buildings and structures

Heat supply of buildings. Methods for calculating systems energy requirements and system efficiencies for heat generation systems with solar systems

Engineering networks of buildings and structures internal. Axial bellows compensators for pipelines of heating, heating and water supply systems. General specifications

Household and similar electrical appliances. Security. Part 2-73. Additional requirements for stationary immersion heaters

Household and similar electrical appliances. Test code for noise. Part 1. General requirements

Automatic valves for regulation of temperature in heating devices of systems of water heating of buildings. General specifications

Non-domestic gas-fired convective air heaters, incorporating a fan to transportation of combustion air or combustion products, nominal heat output of up to 300 kW

Industrial gas-using equipment. Air heaters. General technical requirements

The heating systems. Operational tuning of centralized heating systems.

GSE. Consumption and mass of water. Methods of measuring mass flow and mass of water at the heat metering station at the heating main "2 Home" of the Central Heating and Power Plant of the Nevsky Branch of TGC-1

Building heating systems. Method for calculating energy characteristics and system performance indicators. Part 2-3. Heat distribution systems for building heating

System for automated commercial accounting of heat energy and heat carrier of the South-West boiler house for the open joint-stock company Ural Heating Network Company, a branch of Chelyabinsk Heating Networks. Measurement Technique

Album 1. General explanatory note. Production technology. Architectural solutions. Reinforced concrete structures. Metal structures. Internal water supply and sewerage. Heating and ventilation. Power equipment. Heating and ventilation automation. Communication and signaling

Instructions on calculating the heating surface of heating devices in equivalent square meters

Building heating systems. Method for calculating energy characteristics and system performance indicators. Part 2-1. Heat transfer systems for space heating

Heating boilers, hot-water, cast-iron, heating capacity to 85 kW

Heating units and internal heating systems

Medical moisturizers. Technical requirements and test methods.

The system of indicators of product quality. Mechanical stokers with stroking bar for heating boilers, heating performance up to 3,15 MW. Nomenclature of indices