Documents by Year

1930s (86)

1940s (117)

1950s (2)

1960s (844)

1970s (20003)

1980s (20684)

1990s (2216)

2000s (520)

2010s (44)

2020s (1)

2020 (1)

OST

1971

«
1
…
18
19
20
21
22
23
24
…
35
»

OST 26-08-288-71

Bleaching towers. Types and main parameters.

OST 26-08-319-71

Fiber removers. The main parameters

OST 26-08-339-71

Blades. Design and dimensions

OST 26-08-354-71

Shafts of gluing machines. Types, main parameters and dimensions.

OST 26-09-23-71

Items of polymer machine building. Preparation and presentation of chapters in equipment passports

OST 26-09-317-71

Cooling drum machines. Types and main parameters.

OST 26-09-318-71

Machines and equipment for cutting billets of rubber mixtures and rubber products. The main parameters

OST 26-09-347-71

Items of polymer machine building. Export supplies. General specification

OST 26-09-359-71

Reliability of goods of Machine Building industry. General provisions

OST 26-09-630-71

Spray nozzles. Design and dimensions

OST 26-09-631-71

Eyebolts and sockets for these. Dimensions and lifting capacity. Technical requirements. Labeling and Packaging (limitation of GOST 4751-67)

OST 26-09-69-71

Pneumatic cylinders for nominal pressure of 10 kgf/cm2 (limitation of GOST 6540-88, GOST 15608-70)

OST 26-09-700-71

End connections for pipes. Construction and dimensions.

OST 26-09-701-71

Connection of metal hoses to pipe. Design and dimensions

OST 26-09-710-71

Terminal boxes. Design and dimensions

OST 26-09-711-71

Squares for broaching with flanges for wiring. Design and dimensions

OST 26-09-712-71

Drawing crosses for electric wiring. Design and dimensions

OST 26-09-713-71

Drawing angles for electric wiring. Design and dimensions

OST 26-09-714-71

Drawing straight boxes with flanges for electric wiring. Design and dimensions

OST 26-09-717-71

Drawing tees for electric wiring. Design and dimensions

OST 26-09-718-71

Terminal connections for metal hoses. Design and dimensions

OST 26-09-719-71

Drawing boxes for electric wiring. Design and dimensions

OST 26-09-724-71

Transport rollers. Design and dimensions. Technical requirements

OST 26-09-725-71

Transporter drums. Drawing drums. Design and dimensions. Technical requirements

OST 26-09-726-71

Transporter drums. Drive drums. Design and dimensions. Technical requirements

OST 26-09-727-71

Transporter drums. Deflecting drums. Design and dimensions. Technical requirements

OST 26-09-730-71

Seals screw-type SKVrt for electric cables and wires. Design and dimensions (limitation of GOST 4840-64)

OST 26-09-734-71

Seals screw-type SKPrt for electric cables and wires. Design and dimensions (limitation of GOST 4841-64

OST 26-09-735-71

Seals pipe-type SKT for electric cables and wires. Design and dimensions (limitation of GOST 4846-64)

OST 26-10-492-71

Oil indicators, round. Design and dimensions

OST 26-10-493-71

Edge connection on shafts. Design and dimensions

OST 26-10-495-71

Lubrication nipples for consistent greases and oils (limitation of GOST 1303-56)

OST 26-10-49-71

Oil indicators, pipe type. Design and dimensions. Technical requirements

OST 26-10-498-71

Oil indicators, round. Design and dimensions

OST 26-12-244-71

Piston compressors. Crossheads. Design and main dimensions

OST 26-12-335-71

Mobile compressor stations for general purposes. Technical requirements

OST 26-12-355-71

Mobile compressor stations for general purposes. Rules of transportation, storage and the manufacturer's warranty

Gauges for carving deep-sucker rods and couplings to them. Design and dimensions

Set of meters to measure the racks and auger housings of centrifugal pumps. Types and main parameters.

OST 27-00-23-71

Warp-tying machines. General specifications.

OST 27-00-25-71

Thread gauges for trapezoidal thread. Design and dimensions. Technical requirements. Method of calculation.

OST 27-00-26.10-71

Tools for nut-upsetting machines. Punches of У operations. Design and dimensions (limitation under MH 5121-63).

OST 27-00-26.11-71

Tools for nut-upsetting machines. Matrixes of У operations. Design and dimensions (limitation under MH 5122-63).

OST 27-00-26.12-71

Knives with insert for cutting off blanks of bolts, screws and rivets with length of product rod up to 5 diameters. Design and dimensions (restriction as per GOST 12972-67).

OST 27-00-26.13-71

Knives with insert for cutting off blanks of bolts, screws and rivets with product rod length of 5 to 10 diameters. Design and dimensions (restriction as per GOST 12972-67).

OST 27-00-26.14-71

Matrix an insert for cutting bolt, screw and rivet blanks. Design and dimensions (restriction as per GOST 12974-67 limit).

OST 27-00-26.15-71

Final punches with insert for upset of screws semicircular and countersunk heads (restriction as per GOST 12975-67).

OST 27-00-26.16-71

Preliminary punches with insert and pusher for upset of screws, bolts and bridges. Design and dimensions (restriction as per GOST 12976-67).

«
1
…
18
19
20
21
22
23
24
…
35
»

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power Industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!