Documents by Year
1930s (86)
1940s (117)
1950s (2)
1960s (844)
1970s (20003)
1980s (20684)
1990s (2216)
2000s (520)
2010s (44)
2020s (1)
Other (744)

OST

1977

OST 3-3614-77
OST 3-3614-77
Jumpers. Design and dimensions.
OST 3-3615-77
OST 3-3615-77
Lugs. Design and dimensions.
OST 3-3616-77
OST 3-3616-77
Magnetic wire plates. Design and dimensions.
OST 3-3617-77
OST 3-3617-77
Frameworks of inductors. Design and dimensions.
OST 3-3618-77
OST 3-3618-77
Frameworks for transformers. Design and dimensions.
OST 3-3619-77
OST 3-3619-77
Construction steel pipe joints. Induction soldering. Standard techniques and procedures.
OST 3-3620-77
OST 3-3620-77
Construction steel pipe joints . Flame soldering. Standard techniques and procedures.
OST 3-3621-77
OST 3-3621-77
Construction steel pipe joints. Furnace soldering with capillary fit-up gaps. Standard techniques and procedures.
OST 3-3622-77
OST 3-3622-77
Construction steel pipe joints. Furnace soldering with non-capillary fit-up gaps. Standard techniques and procedures.
OST 3-3643-77
OST 3-3643-77
Crank spindles. Design and dimensions.
OST 3-3645-77
OST 3-3645-77
Drive-shafts for bench-type drilling machines НС-12А. Design and dimensions.
OST 3-3646-77
OST 3-3646-77
Drive-shafts for vertical drilling machines. Design and dimensions.
OST 3-3659-77
OST 3-3659-77
Carrier plates (blanks). Design and dimensions.
OST 3-3660-77
OST 3-3660-77
Slots for stray shaft bearings. Design and dimensions.
OST 3-3661-77
OST 3-3661-77
Grooves for spindle fastening with bracket. Design and dimensions.
OST 3-3662-77
OST 3-3662-77
Slots for the transmission shaft bearings. Design and dimensions.
OST 3-3663-77
OST 3-3663-77
Slots for drive shaft bearings. Design and dimensions.
OST 3-3665-77
OST 3-3665-77
Cable - wisp nodes. Typical technological processes of production.
OST 3-3675-77
OST 3-3675-77
Fibre optics. Terms, definitions and letter symbols.
OST 3-3677-77
OST 3-3677-77
Optical glass. Series 200 and Н. Technical specifications.
OST 3-3679-77
OST 3-3679-77
Holders for prismatic cutters for lathes. Construction and dimensions.
OST 3-3686-77
OST 3-3686-77
High-strength wind-up fibre plastics. Method for determination of rupture stress at stretching in the direction of reinforcement.
OST 3-3687-77
OST 3-3687-77
High-strength wind-up fibre plastics. Method for determination of a tensile modulus while stretching in the direction of reinforcement.
OST 3-3688-77
OST 3-3688-77
High-strength wind-up fibre plastics. Method for determination of rupture stress at interlaminar shear.
OST 3-3689-77
OST 3-3689-77
High-strength wind-up fibre plastics. Method for determination of a modulus of interlaminar shear.
OST 3-3693-77
OST 3-3693-77
Pipeline welded joints of automated transfer line services. Technical requirements, acceptance rules and testing rules.
OST 3-3701-77
OST 3-3701-77
Order of company activity investigation in the area of itemdesign manufacturability.
OST 3-3702-77
OST 3-3702-77
Metal pipes. T tangential direction tensile test methods.
OST 3-3703-77
OST 3-3703-77
Refractory metals. Methods for determination of mechanical properties in brittle state.
OST 3-3705-77
OST 3-3705-77
Demountable connectors of hydraulic products. Parameters and dimensions.
OST 3-3706-77
OST 3-3706-77
Collet connector. Design and dimensions.
OST 3-3707-77
OST 3-3707-77
Pin connector. Design and dimensions.
OST 3-3708-77
OST 3-3708-77
Loop wiring connector. Design and dimensions.
OST 3-3709-77
OST 3-3709-77
Plugs. Design and dimensions.
OST 3-3710-77
OST 3-3710-77
Wearing rings. Design and dimensions.
OST 3-3711-77
OST 3-3711-77
Products made of foam polyurethane. Type ППУ-ЗФ. Typical production process.
OST 3-3712-77
OST 3-3712-77
Rigid polyurethane foam. Grade ППУ-308Н. Typical polyurethane foam coating applying Technological process.
OST 3-3713-77
OST 3-3713-77
Technological rotors for automatic lines. Parametrical ranks.
OST 3-3715-77
OST 3-3715-77
Bushings for threading rack-type tools to turret machines. Construction and dimensions.
OST 3-3716-77
OST 3-3716-77
Face Shaft mounted mills with mechanical fastening of hard alloy plates. Design and dimensions.
OST 3-3717-77
OST 3-3717-77
bidentate End mills with taper shank and mechanically fastening of hard alloy plates.Design and dimensions.
OST 3-3718-77
OST 3-3718-77
End Mills with taper shank and mechanical fastening of hard allows blades. Design and dimensions.
OST 3-3719-77
OST 3-3719-77
tripartite face milling cutters with mechanical fastening of hard alloy plates. Design and dimensions.
OST 3-3720-77
OST 3-3720-77
bilateral disc cutters with mechanical fastening of carbide inserts. Design and dimensions.
OST 3-3721-77
OST 3-3721-77
Adjustable core drills with taper shank and mechanical fastening of plates made of hard alloy. Design and dimensions.
OST 3-3722-77
OST 3-3722-77
Adjustable shaft mounted core drills with mechanical fastening of plates made of hard alloy. Design and dimensions.
OST 3-3723-77
OST 3-3723-77
Adjustable core drills with taper shank of 7:24 and mechanical fastening of plates made of hard alloy. Design and dimensions.
OST 3-3724-77
OST 3-3724-77
Countersinks of 90 degrees with taper shank and mechanical fastening of plates made of hard alloys. Design and dimensions.

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power Industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!