Documents by Year

1930s (86)

1940s (117)

1950s (2)

1960s (844)

1970s (20003)

1980s (20684)

1990s (2216)

2000s (520)

2010s (44)

2020s (1)

2020 (1)

OST

1971

«
1
…
31
32
33
34
35
»

Pipe connections nipple-face DN 3-32, PN 100-200 kgf/cm2

Branch pipes onboard welded. Technical conditions

Fixing replacement cartridges and cartridge boxes for spare fuse-links for ПР- type fuses for 15 and 60 A 220 V and 500 V.

Symbols of conventional graphic elements of ship electrical circuits

Method of calculation of consumer voltage deviations and of voltage setting value for generators in ship electrical power systems with AC frequency of 400 Hz.

Method of calculating insulation resistance standards of ship electrical networks

Piezoelectric ceramic elements of "Sphere" type. Main dimensions, design and technical requirements.

Brush special switches for marine instruments.

Insulation washers and rings. Design, dimensions and technical requirements.

Equipment of automatic control of piston electric compressors and electric compressor stations.

Instrument lubricants and oil. Range of products.

Conical pin joints with punching security. Technical requirements and standard techniques and procedures.

Radio interference suppression in lifting gear, masting and upperdeck devices during radio transmitter operation.

Loads waveguide (antenna equivalent) on increased capacity.

Rectangular connector РПН1, РПН2, РПН3.

Information management systems including digital computer systems for marine instrumentation. Methods of calculation and estimation of reliability.

Thermo-switches.

Enamel coating for parts made of Aluminium and its alloys. Typical technological processes.

Planning of reliability testing and evaluation of reliability testing results.

Small-size electric machine. Epoxy filling. Typical technological processes.

Forgings of copper and Aluminium nonferrous alloys, manufactured by hammer forging. Tolerances and allowances.

Steel standard forgings in shipbuilding, manufactured by free forging on hammers

Geometry of turning tools and techniques of cutting for steel and alloys.

Joint seams soldered by precious metal alloys.

Cleaning and conservation of pipes and fittings of ship piping systems (before installation). Typical technology

Cuprammonium fibre. Technical requirements.

High bulk combined low elongation thread ОКЭЛАН АмК.

Enamel coating of anaesthesia apparatus Aluminium alloy parts. Typical technological processes.

Power Transformers. Mounts. Types and basic dimensions.

Power Transformers.

Power Transformers. Frameworks. Species. Main dimensions.

Power Transformers. Wires and materials. Mark. Gauge.

Staple unpainted viscose fibre.

Industrial explosives. Lump trotyl. Specifications.

Granulated industrial explosives. Granulites АС-8, АС-4 and С-2.

Guidelines for the drawings of the grading and hallmarking products.

Details made of skin. Tolerated size deviations.

Pup jack Г-4 (kit of parts). Construction and dimensions.

Moulded socket. Construction and dimensions.

Socket. Construction and dimensions.

Bushing. Construction and dimensions.

Nut. Construction and dimensions.

One-wire plug Ш-4 (set of parts). Design and dimensions.

Pin. Design and dimensions.

Bushing. Construction and dimensions.

Pup jack Г-1,2 (kit of parts). Construction and dimensions.

Moulded socket. Construction and dimensions.

«
1
…
31
32
33
34
35
»

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power Industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!