Documents by Year
1930s (86)
1940s (117)
1950s (2)
1960s (844)
1970s (20003)
1980s (20684)
1990s (2216)
2000s (520)
2010s (44)
2020s (1)
Other (744)

OST

OST 1-41755-90
OST 1-41755-90
Installation of sealed output with rockings to the carcass and fastening by balts. Typical technological operation.
OST 1-41756-90
OST 1-41756-90
Installation of sealed output on traction and carcass and fastening by collar and clamping screw. Typical technological operation.
OST 1-41757-90
OST 1-41757-90
Installation of sealed output on the cables with application of sealant and fastening by bolts. Typical technological operation.
OST 1-41758-90
OST 1-41758-90
Installation of guide fluoroplastic plate on cables and carcass fastening by bolts. Typical technological operation.
OST 1-41759-90
OST 1-41759-90
Installation of the wheel column into lug carcass bracket and fastening by the hinge pins. Typical technological operation.
OST 1-41760-90
OST 1-41760-90
Installation of the wheel column or pedals between the two planes of carcass and fastening by bolts. Typical technological operation.
OST 1-41761-90
OST 1-41761-90
Installation of the control wheel into the flange hole and fastening by bolt. Typical operation of technological processes.
OST 1-41762-90
OST 1-41762-90
Installation of pedal by bracket to the carcass and fastening by bolts. Typical technological operation.
OST 1-41763-90
OST 1-41763-90
Laying of the rollers on the roller guides and on the holes of the frame. Typical process operation
OST 1-41764-90
OST 1-41764-90
Laying the cable with the ends sealed along the roller guides. Typical process operation
OST 1-41765-90
OST 1-41765-90
Laying cables along the guide pads. Typical process operation
OST 1-41766-90
OST 1-41766-90
Pot eye wire laying. Typical technological operation.
OST 1-41767-90
OST 1-41767-90
Laying the cables along the guide dies. Typical process operation
OST 1-41768-90
OST 1-41768-90
Laying of cables through a sealed lead with rubber inserts and bolting. Typical process operation
OST 1-41769-90
OST 1-41769-90
Sealing off wire laying between jack pump and pulley sensor. Typical technological operation.
OST 1-41770-90
OST 1-41770-90
Connection and fixture of rods, rod and walking beam without rod length adjustment. Standard technological operation.
OST 1-41771-90
OST 1-41771-90
Connection and fixture of rods, rod and walking beam or driving dog without rod length adjustment. Standard technological operation.
OST 1-41772-90
OST 1-41772-90
Connection and fastening of a thrust with a thrust or thrust with a rocking chair with adjustable thrust length. Typical process operation
OST 1-41773-90
OST 1-41773-90
Connection of rods and walking beam or driving dog involving rod length adjustment. Standard technological operation.
OST 1-41774-90
OST 1-41774-90
Connection of rod with walking beam and finished item. Standard technological operation.
OST 1-41775-90
OST 1-41775-90
Castle nut connection of rod and bolt driving dog. Standard technological operation.
OST 1-41776-90
OST 1-41776-90
Connection of a thrust with a bushing and bolting. Typical process operation
OST 1-41777-90
OST 1-41777-90
Turnbuckle joint of cables. Standard technological operation.
OST 1-41778-90
OST 1-41778-90
Connection of a rod with a rocking chair by a pin pressed into the rocking chair and fastening with a nut. Typical process operation
OST 1-41779-90
OST 1-41779-90
Bolted joint of wires. Typical technological process.
OST 1-41780-90
OST 1-41780-90
Sealing of cable on a sector with a washer. Typical technological operation.
OST 1-41781-90
OST 1-41781-90
Sealing of cable with a ball into actuator, fastening a drum lid. Typical technological operation.
OST 1-41782-90
OST 1-41782-90
Sealing of cable into actuator with a coupling, fastening a drum lid with a clamp screw. Typical technological operation.
OST 1-41783-90
OST 1-41783-90
Sealing of cable into actuator with a loop, fastening a drum lid. Typical technological operation.
OST 1-41784-90
OST 1-41784-90
Sealing of cable into actuator fastened with a ring. Typical technological operation.
OST 1-41785-90
OST 1-41785-90
Sealing of cable with threaded lugs on a sector or sector rocker. Typical technological operation.
OST 1-41786-90
OST 1-41786-90
Sealing of cable with ball lugs on a sector and connection with actuator cable through a turnbuckle. Typical technological operation.
OST 1-42438-90
OST 1-42438-90
Installation and monitoring of permanent solder joints of pipelines. Typical technological process.
OST 1-42439-90
OST 1-42439-90
Installation and control of permanent connections of pipelines with thermal memory (TMS). Typical process
OST 1-42440-90
OST 1-42440-90
Replacement of fixed peat-oil mixtures at discovery of defects in a final assembly shop. Typical technological processes.
OST 1-42441-90
OST 1-42441-90
Production of split samples by gravity die casting. Typical technological process.
OST 1-42442-90
OST 1-42442-90
Production of punches for hot deformation. General technical requirements.
OST 1-42443-90
OST 1-42443-90
Single complex of standards for automated systems. Automated systems for technological purposes. Requirements specification for establishment of systems.
OST 1-42444-90
OST 1-42444-90
A single set of standards for automated systems. Terms and Definitions
OST 1-42472-90
OST 1-42472-90
Production of hot-stamped blanks on horizontal forging machines (GKM). Process parameters. Elements of construction snap
OST 1-42473-90
OST 1-42473-90
Dimensional chemical etching of parts. General requirements for accuracy and surface roughness
OST 1-42474-90
OST 1-42474-90
Automated design system. Representation and data transmission. The passport of data presentation on machine carriers. Procedure and construction.
OST 1-42475-90
OST 1-42475-90
Computer-aided design system. Presentation and transmission of data. Instructions on the marking and marking of products. Order and construction
OST 1-42476-90
OST 1-42476-90
Ultrasonic thickness gauge to control the thickness of the walls spar and tail rotor helicopters from composite materials. General technical requirements.
OST 1-42477-90
OST 1-42477-90
Automated worktime standarts (SAPR NT) design system of mechanical processing operations. Input document.
OST 1-42478-90
OST 1-42478-90
Automated worktime standarts (SAPR NT) design system of mechanical processing operations. Output document.
OST 14-7-234-90
OST 14-7-234-90
Blast-furnace coke from coal of eastern regions. Technical requirements.
OST 1-48013-90
OST 1-48013-90
Units. Marking of details and assembly units.

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power Industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!