Documents by Year

1930s (86)

1940s (117)

1950s (2)

1960s (844)

1970s (20003)

1980s (20684)

1990s (2216)

2000s (520)

2010s (44)

2020s (1)

2020 (1)

OST

«
1
…
6
7
8
9
10
11
12
…
23
»

Steeply curved unions with two straight sections. Design.

Steeply curved unions with two straight sections. Design.

Steeply curved unions with two straight sections. Design.

Steeply curved unions with two straight sections. Design.

Pipe and sleeve fitting joints. Construction.

Thermo-mechanical connection pipes fixing couplings. Design.

OST 11-8.0017-88

System of ensuring measurement unity in the ministry. Organization and carrying out procedure of departmental metrological certification and measuring instrument checking and branch usage control.

OST 11-8.0018-88

System of ensuring measurement unity in the ministry. Construction, content and statement of electronic equipment product parameter measurement method standard.

OST 12.16.328-88

Quality indicator system. Cutters for shearers. Product indicators.

OST 12.44.325-88

Double-acting rubber sleeve for hydraulic cylinders. Design, dimensions and technical requirements.

OST 12.44.326-88

Protective rings for double acting cuffs. Design, dimensions and specifications.

OST 12.44.327-88

Wipers for hydraulic cylinders. Construction, dimensions and specifications.

Rivets of high shear strength with a hex head for composite materials. Design.

Bodies of high shear strength rivets with hexagon head for composite materials. Design.

Rivet screws with high strength truncation for composite materials. Construction.

Ring of high shear strength rivets for composite materials. Design.

Bearings for rivets with high-resistance shear for composite materials. Construction.

Rivets of high resistance to a slice with a secret head a corner the 120th hail. for composite materials. Design

Bodies of high shear strength rivets with countersunk head 120 ° for composite materials. Design

Rivets of high shear strength for composite materials. Technical conditions.

Occupational safety standards system. Production of afterproducts based on the wood rosin and pine needle oil. Safety requirements.

Matches. Terms and definitions

Raw wood. Group method of volume measurement using weight

Production of solid laminated wood. Terms and definitions

Furniture cases and tables. Test methods for drawers (floor boxes)

Plywood. Perforation method for determination of formaldehyde

Corrugated cardboard. Method for determination of the tensile strength of the line of division

Wood sticks. Methods for measuring the volume

Car -trailers. Preparation of surfaces prior to painting.

Typical technological operations for the installation of electrical equipment. Main provisions

Installation of finished products (transformers, amplifiers, converters, etc.) to the carcass or the bracket and fastening by bolts (nuts). Typical technological operation.

Installation of finished products (boxes, transformers, converters, etc.) on the amortization bolts and fastening by nuts. Typical technological operation.

Installation of radio equipment units on the guides of carcass or frame and fastening by clamps. Typical technological operation.

Installation of radio equipment units on the guide frame and fastening by locks. Typical operation of technological process.

Installation of the battery along the guide rails of container and fastening by locks. Typical technological operation.

Installation of container with batteries on the guides of carcass and fastening by locks. Typical technological operation.

Installation of the onboard aeronautical light (BANO) in the opening of the casing with a flange on the bracket, fastening with bolts (screws) and connection. Typical process operation

Installation of an aeronautical tail light such as ANO-ZBL in the frame holder, fastening with screws and connection. Typical process operation

Installing the landing light into the skin hole, bolting (screws) and connecting. Typical process operation

OST 14-1-228-88

Blooms and square hot-rolled blanks made of quality and high-quality steel. Technical requirements.

Installation of headlights illuminating the front edges of the wing type FPK in the cut-out trim, fastening with bolts (screws) and connection. Typical process operation

OST 14-1-229-88

Hot-rolled strip of carbon high-quality structural steel. Specification.

Installation of lamp into the hole and on the panel surface, fastening by bolts and connection. Typical technological operation.

Installing the SB-1 type luminaire on the frame, screw fastening and connection. Typical process operation

Installation of lamp the type CT to the bracket, fastening by bolts and connection. Typical technological operation.

Antenna Installation of first range into the hole and on the surface of cladding fastening of bolts (screws) and connection. Typical technological operation.

Installation of frame antenna into sheathing cut-out and to the carcass fastening by bolts (screws) and connection. Typical technological operation.

Antenna installation into the hole of the bracket, fastening of screws and connection. Typical technological operation.

«
1
…
6
7
8
9
10
11
12
…
23
»

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!