Documents by Year

1960s (14)

1970s (456)

1980s (2039)

1990s (1670)

2000s (1369)

2010s (384)

2020s (16)

2020 (16)

RD

1977

«
1
2
»

Guidelines for the Determination of Return on Capital Investments

Instructions on the organization of work to eliminate emergency oil spills at sea

RD 31.11.81.04-77

Rules for the sea transportation of brandy spirits in bulk by the vessels of the Ministry of the Navy

RD 31.11.81.05-77

Technical Specifications for Maritime Transport of Bulk Methanol

RD 31.11.81.06-77

Technical conditions of sea transportation of acrylonitrile in bulk

RD 34.01.401-77

Methodical instructions. The procedure for implementing the standards of the Unified system of technological documentation in energy repair

RD 34.10.384-77

Standards for the consumption of materials for repair and maintenance of overhead power lines with a voltage of 35 - 500 kV

RD 34.10.385-77

Standards of emergency stock of materials and equipment for the restoration of overhead power lines with a voltage of 0.4 - 35 kV

RD 34.20.577-77

Guidelines for determining the stability of power systems. Part 1

RD 34.20.578-77

Guidelines for determining the stability of power systems. Part II

RD 34.35.605-77

Standards of periodicity of scheduled maintenance and overhaul of remote control equipment

RD 34.47.609-77

Manual overhaul of oil switch S-35M-630-10

RD 34.47.610-77

Guidelines for the overhaul of the oil switch U-220-1000

RD 34.48.402-77

Instructions for setting up and operating UPZ-70 transceivers

Temporary safety regulations and environmental protection in the design of the arrangement and operation of oil fields, developed with the use of solutions of surfactants of the type OP-10 for waterflooding

Instructions for hydrogeological studies of reservoirs and wells in oil and gas regions of the USSR

Guidelines for determining the technical and economic efficiency of simultaneous separate operation of several layers

Report card of technical equipment for emergency recovery points of oil trunk pipelines

Technique for determining the technological indicators of the development of oil and gas deposits

Instructions for the preparation and anticorrosive protection of the inner surface of construction of reservoirs

Industry methodology for the regulation of spare parts for the main equipment of gas processing plants

Guidelines for the development of casing flow rates for drilling oil and gas wells

Temporary methodology for calculating drill pipe consumption rates for cushioning in deep drilling

Instructions for the construction of the roadbed of oilfield roads on weak lake-marsh and floodplain sediments using local soils in conditions of permanent or temporary flooding

Industry-specific rationing of consumption of basic and auxiliary materials in mechanical engineering. Part 7. Calculation of consumption rates of hard alloys

Guidance on the design and feasibility study of oil field development using the method of impacting the reservoir with polymer thickened water

Regulations on the procedure for the delivery and acceptance into service of organizational-technological automated control systems (ASTMs) at enterprises and production facilities of the Ministry of Petroleum Industry

Ship premises. Classification. Designations and designations.

Welded seams of designs made of copper and its alloys. Types, design elements and technical requirements.

Non-destructive testing. Casting of metals and their alloys. Radiographic method.

RD RTM 26-07-218-77

Method for determining the probability of failure-free operation of pipeline valves based on the results of the analysis of the technological process

RD RTM 26-08-47-77

Automated control systems for inlet devices of the closed type

RD RTM 26-12-15-77

Valves self-acting piston compressors. Method of assessing the technical level and quality

RD RTM 26-14-002-77

Unified system of technological preparation of production in the chemical and petroleum engineering. Typical project of improving the technological preparation of production at the enterprises of the industry on the basis of ESTPP

RD RTM 26-14-09-77

Gas-cleaning and dust-collecting equipment. Technical conditions. Rules of construction, presentation, design, procedure for approval, approval and state registration

Instruction on the procedure for reviewing, approving, registering and issuing programs for the comprehensive standardization of products in the system of Gosstandart of the USSR

Instructions on the procedure for coordinated development, approval and introduction of standards and prices for engineering products for industrial purposes

Guidelines for the development, coordination and approval of programs for the metrological support of branches of the national economy

Guidelines. Legal requirements for standards and specifications. The procedure for conducting legal expertise of draft state standards

Guidelines for determining the types of standards and the construction of their standard forms, taking into account the specificity of product groups

Guidelines for the planning and conduct in the country of work on the bilateral unification of the normative-technical documents of the USSR and the socialist countries

Guidelines. Methods of selection and optimization of controlled parameters of technological processes

Guidelines for state supervision of the implementation and compliance with the standards of the system of safety standards

Methodical instructions for determining the norms of costs for warranty repair of household machines and appliances

Guidelines. Building enterprise standards integrated product quality management system

Guidelines. The procedure for state supervision of the implementation and compliance with the standards of the Unified system of technological preparation of production at enterprises

Guidelines for the selection of standard energy, spectral and time intervals for measuring instruments of the energy parameters of radiation of optical quantum generators and preferred numbers in the interval

Methodical instructions on the procedure for planning the activities of departmental metrological services

«
1
2
»

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!