1970

RESET FILTERS    Category:   
Product Type:
GOST 15754-70
GOST 15754-70
Clamping claw with base 120x180 mm of universal-gathering devices with grooves of 16 mm. Design and dimensions
GOST 15755-70
GOST 15755-70
Clamping lathe with base 120x420 mm of all-purpose devices with grooves of 16 mm. Design and dimensions
GOST 15756-70
GOST 15756-70
Clamps of universal-assembly devices with grooves 16 mm. Design and dimensions
GOST 15757-70
GOST 15757-70
Clamps screw inclined universal-assembly devices with grooves 16 mm. Design and dimensions
GOST 15758-70
GOST 15758-70
Clamps of all-purpose devices with grooves of 16 mm. Design and dimensions
GOST 15759-70
GOST 15759-70
Holder of universal-assembled devices with grooves 16 mm. Design and dimensions
GOST 15760-70
GOST 15760-70
Lunette roller of universal-assembly devices with grooves 16 mm. Design and dimensions
GOST 15761-70
GOST 15761-70
Bracket with base 120x180 mm of all-purpose devices with grooves 16 mm. Design and dimensions
GOST 15762-70
GOST 15762-70
Personal protective equipment. Technical requirements
GOST 15763-70
GOST 15763-70
Connections of pipelines with a cutting ring on Pd 40 MN / M2 (approximately 400 kgf / cm2). Technical requirements
GOST 15764-70
GOST 15764-70
Connections of pipelines with a cutting ring pass through to PN 40 MN / m2 (approximately 400 kgf / cm2). Design and dimensions
GOST 15765-70
GOST 15765-70
Transitions of pipelines with a cutting ring on Pd 40 MN / M2 (approximately 400 kgf / cm2). Design and dimensions
GOST 15766-70
GOST 15766-70
End connections of pipelines with a cutting ring on Pd 40 MN / M2 (approximately 400 kgf / cm2). Design and dimensions
GOST 15767-70
GOST 15767-70
Angle connections of pipelines with a cutting ring pass through to PN 40 MN / m2 (approximately 400 kgf / cm2). Design and dimensions
GOST 15768-70
GOST 15768-70
Connections of pipelines with an inset ring angular end to Ru 40 MN / m2 (= 400 kgf / cm2). Design and dimensions
GOST 15769-70
GOST 15769-70
Connections of pipelines with an engaging ring angular end with an angle of inclination of 135 ° to PN 40 MN / m2 (= 400 kgf / cm2). Design and dimensions
GOST 15770-70
GOST 15770-70
Connections of pipelines with an insertion ring, T-bushing, to PN 40 MN / m2 (approximately 400 kgf / cm2). Design and dimensions
GOST 15771-70
GOST 15771-70
T-Connections of pipelines with a cutting ring on Pd 40 MN / M2 (approximately 400 kgf / cm2). Design and dimensions
GOST 15772-70
GOST 15772-70
Connections of pipelines with an incising ring T-shaped transitional asymmetric to PN 40 MN / m2 (= 400 kgf / cm2). Design and dimensions
GOST 15773-70
GOST 15773-70
Connections of pipelines with an engaging ring are triple end end-ways on Pd 40 MN / M2 (= 400 kgf / cm2). Design and dimensions

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!