1970

RESET FILTERS    Category:   
Product Type:
GOST 15774-70
GOST 15774-70
Connections of pipelines with an incising ring are trigeminal end transition to PN 40 MN / m2 (= 400 kgf / cm2). Design and dimensions
GOST 15775-70
GOST 15775-70
Connections of pipelines with an engaging ring are end-to-end end-to-end pipelines to PN 40 MN / m2 (= 400 kgf / cm2). Design and dimensions
GOST 15776-70
GOST 15776-70
Connections of pipelines with an incipient ring are end-to-end transitional asymmetric tails of PN 40 MN / m2 (= 400 kgf / cm2). Design and dimensions
GOST 1577-70
GOST 1577-70
Hot-rolled thick-gauge steel, high-quality carbon and alloyed structural steel. Technical requirements
GOST 15777-70
GOST 15777-70
Connections of pipelines with an engraving ring cross-pass on Pd 40 MN / M2 (approximately 400 kgf / cm2). Design and dimensions
GOST 15778-70
GOST 15778-70
Connections of pipelines with a cutting ring cross to PN 40 MN / m2 (= 400 kgf / cm2). Design and dimensions
GOST 15779-70
GOST 15779-70
Connections of pipelines with an inset ring cross-end to Ru 40 MN / m2 (= 400 kgf / cm2). Design and dimensions
GOST 15780-70
GOST 15780-70
Connections of pipelines with a cutting ring, bulkhead for PN 40 Mn / m2 (approximately 400 kgf / cm2). Design and dimensions
GOST 15781-70
GOST 15781-70
Connections of pipelines with an engaging ring are deaf to 40 MN / m2 (approximately 400 kgf / cm2). Design and dimensions
GOST 15782-70
GOST 15782-70
Connections of pipelines. The fittings on the Pd 40 MN / m2 (approximately 400 kgf / cm2). Design and dimensions
GOST 15783-70
GOST 15783-70
Connections of pipelines. Fittings for the transition to PN 40 MN / m2 (approximately 400 kgf / cm2). Design and dimensions
GOST 15784-70
GOST 15784-70
Connections of pipelines. End fittings for PN 40 Mn / m2 (400 kgf / cm2). Design and dimensions
GOST 15785-70
GOST 15785-70
Connections of pipelines. Squares communicating PN 40 MN / m2 (about 400 kgf / cm2). Design and dimensions
GOST 15786-70
GOST 15786-70
Connections of pipelines. The end angles for PN 40 MN / m2 (= 400 kgf / cm2)
GOST 15787-70
GOST 15787-70
Connections of pipelines. End angles with an inclination angle of 135 ° to PN 40 MN / m2 (= 400 kgf / cm2). Design and dimensions
GOST 15788-70
GOST 15788-70
Connections of pipelines. Tee passages on the Pd 40 Mn / m2 (approximately 400 kgf / cm2). Design and dimensions
GOST 15789-70
GOST 15789-70
Connections of pipelines. Tee transitional to PN 40 MN / m2 (approximately 400 kgf / cm2). Design and dimensions
GOST 15790-70
GOST 15790-70
Connections of pipelines. Transition tees are asymmetrical for Ru 40 MN / m2 (= 400 kgf / cm2). Design and dimensions
GOST 15791-70
GOST 15791-70
Connections of pipelines. Tee end-to-end passages at PN 40 MN / m2 (= 400 kgf / cm2). Design and dimensions
GOST 15792-70
GOST 15792-70
Connections of pipelines. Tee end-to-end passages at PN 40 MN / m2 (= 400 kgf / cm2). Design and dimensions

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!