1978

RESET FILTERS    Category:   
Product Type:
OST 1 41733-78
OST 1 41733-78
Rocker preparation for installation. Typical technological process.
OST 1 41734-78
OST 1 41734-78
Cable preparation for installation. Typical technological process.
OST 1 41735-78
OST 1 41735-78
Finished item preparation (hydraulic amplifier, servos, electromechanism, etc.) for installation. Typical technological process.
OST 1 41736-78
OST 1 41736-78
Installation of the finished product (unit of hydraulic actuators, servo, gear, mechanism, etc.) on the carcass plane and fastening by bolts. Typical operation of technological process.
OST 1 41737-78
OST 1 41737-78
Installation of mechanism into the lugs between the rockings or rocking and bracket and fastening by bolts. Typical operation of technological processes.
OST 1 41738-78
OST 1 41738-78
Installation of the finished product (power-steering, mechanism, etc.) into the logs of bracket and fastening by bolts. Typical operation of technological process.
OST 1 41739-78
OST 1 41739-78
Installation of the finished product by the plug on cardan and bracket to the carcass with fastening by bolts. Typical operation of technological process.
OST 1 41740-78
OST 1 41740-78
Installation of the finished product (power-steering, mechanism, etc.) on the studs and fastening by nuts. Typical operation of technological process.
OST 1 41775-78
OST 1 41775-78
Connection of rod and bolt driving dog with castle nut fixing. Standard technological operation.
OST 1 41784-78
OST 1 41784-78
Sealing of cable into actuator fastened with a ring. Typical technological operation.
OST 1 41785-78
OST 1 41785-78
Sealing of cable with threaded lugs on a sector or sector rocker. Typical technological operation.
OST 1 41786-78
OST 1 41786-78
Sealing of cable with ball lugs on a sector and connection with actuator cable through a turnbuckle. Typical technological operation.
OST 1 41793-78
OST 1 41793-78
Gas turbine engines turbine blades. Tolerance for dimensions and surface roughness of cast non-machining surfaces.
OST 1 52252-78
OST 1 52252-78
Assembly quick-changing packages with horizontal joint face for formation of rubber rings with round cross section with inner diameter from 31,0 to 95,0 mm. Design and dimensions.
OST 1 52263-78
OST 1 52263-78
Flat Probes. Design and main dimensions.
OST 1 52272-78
OST 1 52272-78
Control and assembly plain Templates. Rib stiffeners. Forms and main dimensions.
OST 1 52275-78
OST 1 52275-78
flat bolted supports for control and assembly templates. Design and dimensions.
OST 1 52279-78
OST 1 52279-78
Rulers for controlling flatness of mould boxes and cores. Design and dimensions.
OST 1 52280-78
OST 1 52280-78
Guides for sliding templates of control devices. Design and dimensions.
OST 1 52292-78
OST 1 52292-78
Basic plate for realignment of flat units assembly jigs. Design and dimensions.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!