1978

RESET FILTERS    Category:   
Product Type:
OST 1 52299-78
OST 1 52299-78
brackets stringers Lock of readjusted assembly tool to assembly flat knots. Design and dimensions.
OST 1 52302-78
OST 1 52302-78
Hot rolling of blade blanks for gas turbine engines. Sectors-punches for hot rolling of blade blanks. Construction and dimensions.
OST 1 52325-78
OST 1 52325-78
Punching inserts (blanks) for screw and crank hot forging presses. General technical requirements.
OST 1 76151-78
OST 1 76151-78
Heating gas stoves. Main parameters and dimensions.
OST 1 76252-78
OST 1 76252-78
Tolerances and seating fits (limitations under СТ СЭВ 144-75).
OST 1 76637-78
OST 1 76637-78
Metal cutting machines. Machine servicing rules applied by machine operators.
OST 1 80292-78
OST 1 80292-78
Strap stranded magnetic conductors. Typical technological processes.
OST 1 80295-78
OST 1 80295-78
Assembling of electric microcars on the temperature-compensated mandrels. Standard technological process.
OST 1 80310-78
OST 1 80310-78
Lead weights casting. Typical technological process.
OST 1 80314-78
OST 1 80314-78
Thread-rolling round tapping die. Typical technological process.
OST 1 80339-78
OST 1 80339-78
Boring contour cut-in bit with mechanical mounting of core parallel middle bodies made of hard alloys. Bore diameter from 3 (up to 4) mm. Design and dimensions.
OST 1 80340-78
OST 1 80340-78
Boring contour cut-in bit with mechanical mounting of core parallel middlebodies made of hard alloys. Bore diameter from 4 (up to 6) mm. Design and dimensions.
OST 1 80341-78
OST 1 80341-78
Boring contour cut-in tool with mechanical mounting of core parallel middlebodies made of hard alloys. Bore diameter from 6 (up to 10) mm. Design and dimensions.
OST 1 80342-78
OST 1 80342-78
Boring contour cut-in bit with mechanical mounting of core parallel middlebodies made of hard alloys. Bore diameter from 10 (up to 18) mm. Design and dimensions.
OST 1 80343-78
OST 1 80343-78
Boring contour cut-in bit with mechanical mounting of core parallel middlebodies made of hard alloys. Bore diameter from 18 mm. Design and dimensions.
OST 1 80344-78
OST 1 80344-78
Boring tools (bore diameter from 24 mm) and outside side-facing and frontal tools with mechanical mounting of cylindrical compound blocks made of hard alloy. Design and dimensions.
OST 1 80345-78
OST 1 80345-78
Outside contour (side-facing and frontal) axial tool with mechanical mounting of cylindrical compound blocks made of hard alloy. Design and dimensions.
OST 1 80348-78
OST 1 80348-78
Group of pairs of materials and geometric parameters of a cutting part of a tool. Technical conditions.
OST 1 80350-78
OST 1 80350-78
Typical technological process casting core. Recommendations on the organization of production and selection equipment for core mouldings by progressive ways.
OST 1 80356-78
OST 1 80356-78
Rings of current-collecting devices based on gold. Typical technological process.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!