1986

RESET FILTERS    Category:   
Product Type:
TU 2-041-1018-86
TU 2-041-1018-86
Hydraulic press for fiberglass with a force of 3150 kN model D2035
TU 2-041-1033-86
TU 2-041-1033-86
Crank sheet shears with inclined knife 4.0x2000 mm. Model ND3316G
TU 2-041-1039-86
TU 2-041-1039-86
The complex of equipment for stamping forgings on the basis of a crank press hot forging force of 10,000 kN. Model AKKB8040.02
TU 2-041-1043-86
TU 2-041-1043-86
Pressure transducers in hydraulic systems with a measuring range of 0-50 MPa. Model U531.41
TU 2-041-1050-86
TU 2-041-1050-86
Crank sheet scissors with inclined knife 2.5x1600 mm model ND3314G
TU 2-041-1059-86
TU 2-041-1059-86
Double-crank double-acting press with special force of 1600 kN closed for deep drawing. Model K6032
TU 2-041-1065-86
TU 2-041-1065-86
The complex of equipment is a special robotic technological for the manufacture of products from cemented carbide powders on the basis of an automatic machine with a mechanical force of 120 kN. Model AKKB0621.31
TU 2-041-1066-86
TU 2-041-1066-86
Control device of an industrial robot. Model C161.21
TU 2-041-114-86
TU 2-041-114-86
Electro-impulse press with stored energy of 20 kJ. Model T1223
TU 2-041-163-86
TU 2-041-163-86
Crank sheet scissors with inclined knife 2.5x1600 mm
TU 2-041-181-86
TU 2-041-181-86
Crank sheet shears with an inclined knife 4,0х2000ММ model НК3416
TU 2-041-216-86
TU 2-041-216-86
Crank sheet shears with inclined knife 6.3x2000 Mm. Model NK3418
TU 2-041-243-86
TU 2-041-243-86
Single-position machines with electronic cycle program control for injection molding of thermoplastic materials with a locking force of 500 kN (50 ts) and 1000 kN (100 ts) of models DE3127-63TS1 and DE3130-125Ts1
TU 2-041-297-86
TU 2-041-297-86
The press is shock. Model SFT 514
TU 2-041-300-86
TU 2-041-300-86
The complex of equipment based on shears of high-grade crank closed with a force of 1000 kN (100Ts). Model AKN 1300.01
TU 2-041-307-86
TU 2-041-307-86
Pipe-bending machine with hydraulic drive with a diameter of 250. 7000 mm
TU 2-041-360-86
TU 2-041-360-86
Special hot-press crank press with a force of 16,000 kN
TU 2-041-361-86
TU 2-041-361-86
The complex of equipment for stamping forgings on the basis of a special crank hot forging press with a force of 16,000 kN. Model AKKB8042.02
TU 2-041-372-86
TU 2-041-372-86
Rotary conveyor line for injection molding of thermoplastic materials with an injection volume of 8 cm3
TU 2-041-378-86
TU 2-041-378-86
Double-acting forging steam-air hammers of arch type With impact energy of 26 kJ, 50 kJ of models М1340А, М1343А

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!