1986

RESET FILTERS    Category:   
Product Type:
TU 2-041-581-86
TU 2-041-581-86
Crank sheet shears with inclined knife 6.3x2000 mm. Model ND338G
TU 2-041-583-86
TU 2-041-583-86
Crank sheet scissors with inclined knife 1.6x1000 mm. ND3312B model
TU 2-041-603-86
TU 2-041-603-86
Automatic hydraulic presses for pressing metal products with forces of 1600, 2500 and 4000 kN. Models DA1532B, DA1534B, DA1536B
TU 2-041-608-86
TU 2-041-608-86
Single-action hydraulic press for frame press with hydraulic pad, force 6300 kN. Model PA3438
TU 2-041-645-86
TU 2-041-645-86
Industrial robot with a loading capacity of 0.63 kg. Model MO, 63TS4201
TU 2-041-646-86
TU 2-041-646-86
The complex of equipment robotic for stamping parts from piece blanks on the basis of a press with a force of 63 kN. Model AKKD2118A.31
TU 2-041-660-86
TU 2-041-660-86
Thread rolling machine with roller and segment for thread rolling on products from M12 to M16. Model AB2522
TU 2-041-700-86
TU 2-041-700-86
Hydraulic floor press for wood-laminate plastics with a force of 40,000 kN model D7446
TU 2-041-701-86
TU 2-041-701-86
Horizontal hydraulic press nozzle force of 20,000 kN model P6743
TU 2-041-702-86
TU 2-041-702-86
Hydraulic press punching force 6300/6300 kN model П2038Б
TU 2-041-703-86
TU 2-041-703-86
Automatic line for the manufacture of blanks bearing rings model L 408A
TU 2-041-763-86
TU 2-041-763-86
Automatic machines for cold forming of balls with a diameter of 25 mm, rollers with a diameter of 20 mm of models АА3724, АА3723А
TU 2-041-765-86
TU 2-041-765-86
Crank sheet scissors with an inclined knife for cutting sheets of 6.3 x 3150, 12x3150 mm with DROs of NB3221F1 models
TU 2-041-782-86
TU 2-041-782-86
Hydraulic hydraulic press force of 2 MN. Model П0733А
TU 2-041-846-86
TU 2-041-846-86
A special hot-press crank press with a force of 10,000 kN. Model KB8040
TU 2-041-847-86
TU 2-041-847-86
Mechanized conveyor line for the manufacture of outer and inner bearing rings. Model L234
TU 2-041-856-86
TU 2-041-856-86
Double-action crank hot forging presses with a force of 5000/5000 kN. Models К8837, К8837-01
TU 2-041-857-86
TU 2-041-857-86
Complex of equipment for stamping parts in detachable dies on the basis of a press with a force of 5000
TU 2-041-879-86
TU 2-041-879-86
The complex of equipment based on a hydraulic press for packaging lightweight metal waste and scrap with a force of 2, 5 MN. Model AKBG 1334.01
TU 2-041-896-86
TU 2-041-896-86
Automatic cold heading two-stroke with a solid matrix with a diameter of 20x200. Model AB1223

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!