Documents by Year
1930s (86)
1940s (117)
1950s (2)
1960s (844)
1970s (20003)
1980s (20684)
1990s (2216)
2000s (520)
2010s (44)
2020s (1)
Other (744)

OST

OST 1-42223-85
OST 1-42223-85
Occupational safety standards system. Production of prepreg polymer composite materials. General safety requirements
OST 1-42225-85
OST 1-42225-85
Typical operations of the assembly process of dashboards, consoles, boxes and shields. Main provisions
OST 1-42226-85
OST 1-42226-85
Installation of finished products (device, sensor, unit, relay etc.) into the hole and on the plane of panel and fastening by screws. Typical operation of technological process.
OST 1-42227-85
OST 1-42227-85
Installation of the finished product (soldering or terminal strip type 73K, 74K, 75K, etc.) on the plane of the panel and fastening by screws. Typical operation of technological process.
OST 1-42228-85
OST 1-42228-85
Installation of device with slit lamp into the hole and on the panel plane and fastening between themselves and to the panel by screws. Typical operation of technological processes.
OST 1-42229-85
OST 1-42229-85
Installation of finished product with cover (light panel reinforcement etc.) in the hole and on the plane of the panel and fastening by screws. Typical operation of technological process.
OST 1-42230-85
OST 1-42230-85
Installation of the finished product (cartridge type APN or APIR, etc.) with a screwed cap into the hole and on the plane of the panel and fastening with screws. Typical process operation
OST 1-42231-85
OST 1-42231-85
Installation of the finished product (switch of type TAP, switch gas station, ASP, rheostat type of Rufo, etc.) to the plane of panel by axis into the hole of the panel and fasting by screws. Typical operation of technological process.
OST 1-42232-85
OST 1-42232-85
Installation of a light guide on the panel and fastening by screws. Typical operation of technological processes.
OST 1-42233-85
OST 1-42233-85
Installing the light guide on the panel and under the clamping nut of the cartridge type SLTSN and fastening to the panel with screws. Typical process operation
OST 1-42234-85
OST 1-42234-85
Installation of a light guide on the panel by cut-outs on the knobs, buttons, etc. and under a cartridge light filter type APM and fastening by screws. Typical operation of technological processes.
OST 1-42235-85
OST 1-42235-85
Installation of finished products (buttons, etc.) in the hole and on the plane and fastening by flange washer a with screws. Typical operation of technological process.
OST 1-42236-85
OST 1-42236-85
Installation of the finished product (button types ДН-1ОМ, КИР, К2ПН, releys, etc.) into net or glass of parts and fastening by clamp screw. Typical operation of technological process.
OST 1-42237-85
OST 1-42237-85
Installation of finished products (buttons, etc.) in the hole and on the plane or the slot of part and fastening by pressing bracket with screws. Typical operation of technological process.
OST 1-42238-85
OST 1-42238-85
Installation of the finished product (type triode MP-104etc.) in the hole or the nest of the plane and fastening to the plane with consignment screws. Typical operation of technological process.
OST 1-42239-85
OST 1-42239-85
Installation of the finished product ( transistor of type P702 etc.) outputs into the hole and on the plane and fastening by screws. Typical operation of technological process.
OST 1-42240-85
OST 1-42240-85
Installation of finished products (switches, relays, etc.) on the bracket by bracket on the carcass and fastening by screws. Typical operation of technological process.
OST 1-42241-85
OST 1-42241-85
Installation of the protective cap or cover for one or a group of switches, switches on the panel and fastening by screws. Typical operation of technological processes.
OST 1-42242-85
OST 1-42242-85
Unit Installation of capacitors the type МБГЧ on the plane of panel and fastening by screws.Typical operation of technological process.
OST 1-42243-85
OST 1-42243-85
Installation of the finished product (lamp socket, buttons, etc.) by screwing into the flange of panel. Typical operation of technological process.
OST 1-42244-85
OST 1-42244-85
Installation of the finished product (button-type KNRM 1, 204K etc.) in the hole and on the plane of panel by screwing of head into the housing of the finished product. Typical operation of technological process.
OST 1-42245-85
OST 1-42245-85
Installation of the finished product (buttons of the type of PRC, resistor, pressure gauge, tap, etc.) into the hole and on the plane of the panel and fastening with a pressure nut. Typical process operation
OST 1-42246-85
OST 1-42246-85
Installation of the finished product (the lamp socket AMP, APV, MD-5, etc.) with a screwed stub into the hole and on the plane of the panel and fastening by clamping nut. Typical operation of technological process.
OST 1-42247-85
OST 1-42247-85
Installation of the finished product (the wafer switch (potentiometer, rheostat, resistors, etc.) on the panel plane by axis or a handle into the hole of panel and fastening by presser nuts. Typical operation of technological process.
OST 1-42248-85
OST 1-42248-85
Installation of the finished product with a wire (an individual luminaire of type SV-2, SVB, etc.) in the hole and on the plane of the panel and fixing with a clamping nut. Typical process operation
OST 1-42249-85
OST 1-42249-85
Installation of the finished product (buttons from the PPS-2M kit) with a harness connection in the hole and on the panel plane and fixing with a clamp nut. Typical process operation
OST 1-42250-85
OST 1-42250-85
Installation of the finished product (button type 5KC) connected with the wiring in the hole and on the plane of the panel and fastening by clamping nut and fixing washer. Typical operation of technological process.
OST 1-42251-85
OST 1-42251-85
Installation of device into the hole of panel and fastening by ring. Typical operation of technological processes.
OST 1-42252-85
OST 1-42252-85
Installation of button in the hole of panel by fastening to the panel with releasable collar screws. Typical operation of technological processes.
OST 1-42253-85
OST 1-42253-85
Installation of the finished product (lamp type
OST 1-42254-85
OST 1-42254-85
Installation of finished products (capacitors, etc.) in the block and fastening of the block to the panel by screws. Typical operation of technological process.
OST 1-42255-85
OST 1-42255-85
Installation of finished product with the handle (crane, etc.) into the mounted collar on the panel and fastening bolt (screw). Typical operation of technological process.
OST 1-42256-85
OST 1-42256-85
Installation of devise into fixed collar on the carcass and fastening by bolt (screw). Typical operation of technological processes.
OST 1-42257-85
OST 1-42257-85
Installation of the finished product in a band clamp mounted on a platform or frame. Typical process operation
OST 1-42258-85
OST 1-42258-85
Installation of the finished product (button types 204K, 205K, 512K, etc.) into the hole of panel and fastening clip. Typical operation of technological process.
OST 1-42259-85
OST 1-42259-85
Installation of the finished product (button type 204K, etc.) into the hole of panel and fastening by split slot with a clamping nut. Typical operation of technological process.
OST 1-42260-85
OST 1-42260-85
Installation of the finished product (half connector plug contactor, terminal strip, etc.) on the rack and fastening by screws. Typical operation of technological process.
OST 1-42261-85
OST 1-42261-85
Installation of one or a group of resistances like VS-25B on racks and fastening with screws. Typical process operation
OST 1-42262-85
OST 1-42262-85
Installation of the finished product (relay type TKE22P1G, terminal block type NU-7200-760, etc.) on the bushings and fastening with screws (bolts). Typical process operation
OST 1-42263-85
OST 1-42263-85
Installation of the final product (sound siren, remote control, etc.) on the bolts with sleeves or pins and fastening nuts. Typical process operation
OST 142263-85
OST 142263-85
Installation of the finished product (sound siren, remote control, etc.) on the bolts with valves or rods and fastening by nuts. Typical operation of technological process.
OST 1-42264-85
OST 1-42264-85
Installation of one or group of resistances of type ВС-25Б on the bolts with bushings and fastening by nuts. Typical operation of technological processes.
OST 1-42265-85
OST 1-42265-85
Installation of the protective cap for one or a group of switches on the plugs and fastening by screws and nuts. Typical operation of technological processes.
OST 1-42267-85
OST 1-42267-85
Protection of contacts of finished products (signal lamp, switches, actuators, buttons, etc.) with a soft cap or a hood. Typical operation of technological process.
OST 1-42268-85
OST 1-42268-85
Protection setting of contacts button 5KS by the connecting harness. Typical operation of technological process.
OST 1-42269-85
OST 1-42269-85
Clamp joint of rubberized hose and metallic tube. Standard technological operation.
OST 1-42270-85
OST 1-42270-85
Connection of rubberized hose and pressure instrument adapter. Standard technical operation.
OST 1-42271-85
OST 1-42271-85
Wire connection to finished product and fastening by hold-down screw. Typical technological process.

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power Industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!