Documents by Year

1930s (86)

1940s (117)

1950s (2)

1960s (844)

1970s (19991)

1980s (20680)

1990s (2216)

2000s (517)

2010s (44)

2020s (1)

2020 (1)

OST

«
1
2
3
4
…
51
»

Backing blocks. Technical conditions.

Waist seat belt for passenger airplane seats. Specifications.

PTFE U-shaped seals. Design and dimensions.

Vehicle-borne adapter for special coolants charging. Design and dimensions.

OST 1 143844-85

Plugs. Design and dimensions.

Roller tips. Design and dimensions.

Rivets with a countersunk head with an angle of 90° made of steel 10. Design and dimensions.

Rivets with a countersunk head with an angle of 90° made of steel 20Г2. Design and dimensions.

Rivets with a countersunk head with an angle of 90° made of steel 12X18H9T. Design and dimensions.

Rivets with a countersunk head with an angle of 90° made of Aluminium alloy B65. Design and dimensions.

Rivets with a countersunk head with an angle of 90° made of Aluminium alloy AMг5П. Design and dimensions

Rivets with a countersunk head with an angle of 90° made of Aluminium alloy Д18. Design and dimensions.

Rivets with a countersunk head with an angle of 90° made of Aluminium alloy Д19П. Design and dimensions.

Rivets with a countersunk head with an angle of 90° made of Aluminium alloy AMц. Design and dimensions

Rivets with a countersunk head with an angle of 90° made of brass Л63. Design and dimensions.

Rivets with a countersunk head with an angle of 90° made of brass Л63 АМ. Design and dimensions.

Rivets with a countersunk head with an angle of 90° made of copper M2. Design and dimensions.

Rivets with a countersunk head with an angle of 120 degrees made of steel 10. Design and dimensions.

Rivets with a countersunk head with an angle of 120 degrees made of steel 12X18H9T. Design and dimensions.

Rivets with a countersunk head with an angle of 120 degrees made of Aluminium alloy B65. Design and dimensions.

Rivets with a countersunk head with an angle of 120 degrees made of Aluminium alloy AMг5П. Design and dimensions.

Rivets with a countersunk head with an angle of 120 degrees made of Aluminium alloy Д18. Design and dimensions.

Rivets with a countersunk head with an angle of 120 degrees made of Aluminium alloy Д19П. Design and dimensions.

Installation of flight and navigation and instrumentation. Typical manufacturing operations.

Water explosive blank stamping for bottom forming made of alloy АМг6.

Knurling on uneven parts of ring surfaces. Typical technological process.

Extended oil- level indicators. Dimensions (restriction as per MN 177-63 ).

Coolant straight-way valves. Design and dimensions.

Tips for cooling tool. Design and dimensions.

air discharging Device. Design and dimensions.

adoptive filters for cooling. Design and dimensions.

Riveting and expansion with processing tool. Typical technological process.

Filling of device cavities with special fluids. Typical technological process.

Castings from yellow metal ЛЦ40Сд manufactured by pressure die casting method. Standard technological process.

Electrical micromachine windings trickle impregnation by epoxide and polyester compounds and polyester varnish Б-ИД-9127. Typical technological processes.

Units of die blocks for die cutting with floating die. Design and dimensions.

Ball guides for die cutting dies with movable punch. Design and dimensions.

Push rods for die cutting with movable punch. Design and dimensions.

Bearing for die cutting punches with a movable plunger (blank). Construction and dimensions.

Shanks for fine die cutting with movable plunger (blank). Design and dimensions.

Assembling and filling of conductive device contact ring blocks. Standard technological processes.

Application of cellulose film on silicate glass of instruments. Typical technological process.

One-piece assembly units. Requirements for manufacturability of typical designs.

Intrablock electrical bunches from installation wires. Requirements for technological design.

Strap conductors for transformers and throttles. Typical designs maintenance requirements.

Cylindrical small-module gearings. Allowance.

«
1
2
3
4
…
51
»

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!