Documents by Year
1930s (86)
1940s (117)
1950s (2)
1960s (844)
1970s (20003)
1980s (20684)
1990s (2216)
2000s (520)
2010s (44)
2020s (1)
Other (744)

OST

OST 13-87-80
OST 13-87-80
Metrological support of forestry and wood industries. Organization and procedure of metrological examination of designing and technological documentation.
OST 13-89-80
OST 13-89-80
Equipment for production of matches. Terms and definitions
OST 13-90-80
OST 13-90-80
Softwood lumber for in-plant wood processing. Method for quality assessment
OST 13-95-80
OST 13-95-80
Shelf holders. Types and main dimensions
OST 13-96-80
OST 13-96-80
Hinges for folding table tops. Types and main dimensions
OST 13-97-80
OST 13-97-80
Ties for tables. Types and main dimensions
OST 13-99-80
OST 13-99-80
Metrological support of furniture production. Pre-production.
OST 1-41144-80
OST 1-41144-80
Method for determination of particle size composition of mechanical impurities in process liquids. Method of analysis.
OST 1-41321-80
OST 1-41321-80
NIAT-1 Electrodes. Technical conditions
OST 1-41322-80
OST 1-41322-80
NIAT-6 Electrodes. Technical conditions
OST 1-41323-80
OST 1-41323-80
NIAT-6AM Electrodes. Technical conditions
OST 1-41324-80
OST 1-41324-80
Electrodes H-11. Technical conditions
OST 1-41325-80
OST 1-41325-80
Electrodes H-13. Technical conditions
OST 1-41519-80
OST 1-41519-80
Industrial purity. Clean rooms. Air purity grade.
OST 1-41530-80
OST 1-41530-80
Production of bolts and hexagon-head screws from titanium alloy VT-16 by hot-heading. Typical process
OST 1-41531-80
OST 1-41531-80
Production of bolts and screws with countersunk and half-countersunk heads from titanium alloy BT16 by hot upset forging. Typical technological process.
OST 1-41532-80
OST 1-41532-80
Making bolts and screws with reduced flat-convex heads of titanium alloy VT16 by hot heading. Typical process
OST 1-41533-80
OST 1-41533-80
Production of bolts and screws from titanium alloy BT16 by hot upset forging. Typical technological process.
OST 1-41534-80
OST 1-41534-80
Stamping precision blanks from titanium alloys. Technological processes
OST 1-41599-80
OST 1-41599-80
Perform a permanent joint with aluminum alloy rivets with a core. Typical process
OST 1-41818-80
OST 1-41818-80
Nut splinting. Typical process operation.
OST 1-41819-80
OST 1-41819-80
Locking bolts, screws, nuts with wire with sealing
OST 1-41820-80
OST 1-41820-80
Locking bolts, screws, nuts with wire without sealing. Typical process operation
OST 1-41821-80
OST 1-41821-80
Locking nuts and bolts with lock washers. Typical process operation
OST 1-41822-80
OST 1-41822-80
Dabbing of bolts, screws, studs, pins and nuts.
OST 1-41823-80
OST 1-41823-80
Staking-on of cylindrical (conical) pins. Typical technological operation.
OST 1-41979-80
OST 1-41979-80
Industry-based processing documents system. Procedure for execution of process flow documents for works of cutting handling.
OST 1-41980-80
OST 1-41980-80
Industry-based processing documents system. Procedure for execution of process flow documents for works of forging and hot pressing.
OST 1-41982-80
OST 1-41982-80
Industry-based processing documents system. Procedure for execution of process flow documents for works of welding and brazing.
OST 1-41983-80
OST 1-41983-80
Spraying powdered polymeric materials in an electrostatic field. Typical process
OST 1-41992-80
OST 1-41992-80
Typical operations of the installation process of pipeline systems. Main provisions
OST 1-41993-80
OST 1-41993-80
Preparation of pipelines and hoses for installation. Typical process operation
OST 1-41994-80
OST 1-41994-80
Preparation of hydraulic units for installation. Typical process operation
OST 1-41995-80
OST 1-41995-80
Fittings preparation (bunk gut, T-joints, crosspieces, rubberized-fabric hoses, bellow valve, etc.) for installation. Typical technological process.
OST 1-41996-80
OST 1-41996-80
Outdoor degreasing of small units without heating. Typical operation of the process.
OST 1-41997-80
OST 1-41997-80
Preparation of pipelines and fittings for threaded joint. Typical technological process.
OST 1-41998-80
OST 1-41998-80
Preparation of pipelines and fittings for soldering. Typical technological process.
OST 1-41999-80
OST 1-41999-80
Clearing of parts and assemblies for metallization. Typical operation of technological process.
OST 1-42000-80
OST 1-42000-80
Preparation of installation area for pipelines installation. Typical technological process.
OST 1-42001-80
OST 1-42001-80
Installation of the finished product (sensor, reducer, hydrounit, etc.) in the hole and on the carcass plane or only on the plane and fastening by bolts. Typical operation of technological process.
OST 1-42002-80
OST 1-42002-80
Installation of the finished product (the hydraulic tank pump, sensor, etc.) on the studs or by studs into the holes of carcass and fastening by nuts. Typical operation of technological process.
OST 1-42003-80
OST 1-42003-80
Installation of the finished product (sensor, separator, pressure Switch, etc.) in the hole and on the carcass and fastening by clamping nut. Typical operation of technological process.
OST 1-42004-80
OST 1-42004-80
Installation of finished product (filter, hydraulic battery etc.) into the lugs of bracket and fastening by bolts and nuts. Typical operation of technological process.
OST 1-42005-80
OST 1-42005-80
Installation of the finished product (hydraulic accumulator, etc.) into fixed by split collar to carcass and fastening by studs or bolts. Typical operation of technological process.
OST 1-42006-80
OST 1-42006-80
Installation of the finished product (the drain tank, container, etc.) in cradle or bracket fastening by fixed band clamp to the carcass. Typical operation of technological process.
OST 1-42007-80
OST 1-42007-80
Installation of the finished product (oil tank, filter, etc.) in cradle or bracket and fastening by unfixed band clamp. Typical operation of technological process.
OST 1-42008-80
OST 1-42008-80
Installation of the finished product (filter, etc.) mounted separable collar on the carcass and fastening by bolt. Typical operation of technological process.
OST 1-42009-80
OST 1-42009-80
Installation of the finished product (container, etc.) by fastened hinge collar to carcass with hinged part and fastening by bolts. Typical technological operation.

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power Industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!