Documents by Year
1930s (86)
1940s (117)
1950s (2)
1960s (844)
1970s (19991)
1980s (20680)
1990s (2216)
2000s (517)
2010s (44)
2020s (1)
Other (951)

OST

OST 1 00392-80
OST 1 00392-80
Switching devices. Method of the determination of parameters of loads and the choice of the devices for the parameters of commutate load.
OST 1 00398-80
OST 1 00398-80
Lifting beams of "travers" type. Specifications.
OST 1 00576-80
OST 1 00576-80
Socket adapters. Technical conditions.
OST 1 00969-80
OST 1 00969-80
Fluid systems for gas turbine aircraft engines. General technical specifications.
OST 1 00980-80
OST 1 00980-80
Annular rubber rings of round cross section. General Specifications.
OST 1 03973-80
OST 1 03973-80
Pressure control devices. Types, basic parameters and technical requirements.
OST 1 03975-80
OST 1 03975-80
Commissures of sleeves and unit. Connecting dimensions.
OST 1 14001-80
OST 1 14001-80
Extension springs of steel carbon wire of IIА class. Design and dimensions.
OST 1 14002-80
OST 1 14002-80
Extension springs of steel wire of 65С2ВА grade. Design and dimensions.
OST 1 14003-80
OST 1 14003-80
Extension springs. Design and dimensions.
OST 1 14004-80
OST 1 14004-80
Extension springs. Design and dimensions.
OST 1 14005-80
OST 1 14005-80
Countersunk screws with an angle of 90 degrees made of polyamide. Construction and dimensions.
OST 1 14006-80
OST 1 14006-80
Round head screws made of polyamide. Construction and dimensions.
OST 1 14007-80
OST 1 14007-80
Hex self-locking nuts made of polyamide.
OST 1 14008-80
OST 1 14008-80
Double lug self-locking nuts made of polyamide.
OST 1 14009-80
OST 1 14009-80
Single lug self-locking nuts made of polyamide.
OST 1 31098-80
OST 1 31098-80
Bolts, screws and pins. Testing methods.
OST 1 31099-80
OST 1 31099-80
Bolt joints. Accessible load limit combinations.
OST 1 31581-80
OST 1 31581-80
Self-tapping screws.
OST 1 33002-80
OST 1 33002-80
Thin hex nuts made of heat-resistant titanium alloy BT3-1. Technical conditions.
OST 1 34045-80
OST 1 34045-80
Rivets with a flat-rounded head with a compensator for automatic riveting, made of Aluminium alloy B65. Designs and dimensions.
OST 1 34057-80
OST 1 34057-80
Rivets with a flat head. Design and dimensions.
OST 1 34058-80
OST 1 34058-80
Rivets with a flat head. Design and dimensions.
OST 1 34059-80
OST 1 34059-80
Rivets with a flat head. Design and dimensions.
OST 1 34060-80
OST 1 34060-80
Rivets with a flat head. Design and dimensions.
OST 1 34061-80
OST 1 34061-80
Rivets with a flat head. Design and dimensions.
OST 1 34062-80
OST 1 34062-80
Rivets with a flat head. Design and dimensions.
OST 1 34063-80
OST 1 34063-80
Rivets with a flat head. Design and dimensions.
OST 1 34064-80
OST 1 34064-80
Rivets with a flat head. Design and dimensions.
OST 1 34566-80
OST 1 34566-80
Insulating washers. Design.
OST 1 35009-80
OST 1 35009-80
Cylindrical pins with tolerance of diameter n6 and k6 made of steel 10Х11Н23ТЗМР. Design and dimensions.
OST 1 37037-80
OST 1 37037-80
Self-locking nuts, floating in a peg iron ring.
OST 1 41580-80
OST 1 41580-80
Tools with glued joints. Methods for determination of glued joints strength of samples.
OST 1 41972-80
OST 1 41972-80
Method of fatigue testing of pipelines and their connections.
OST 1 41981-80
OST 1 41981-80
Industry-based processing documents system. Procedure for execution of process flow documents for works of die stamping, tailoring and blank parts cutting.
OST 1 42105-80
OST 1 42105-80
Control of smoothness of contour-making elements of fittings to assemble units with ruled surfaces. Typical technological process.
OST 1 42152-80
OST 1 42152-80
Laser centring measuring systems. Methods and tools for mark-up basic axes on product units.
OST 1 52468-80
OST 1 52468-80
Sheeting items cutting down. Design and dimensions.
OST 1 52474-80
OST 1 52474-80
First taps for tapered inch thread as per GOST 6111-52 for steels. Design and dimensions.
OST 1 52475-80
OST 1 52475-80
Finishing Taps for tapered inch thread as per GOST 6111-52 for Aluminium alloys. Design and dimensions.
OST 1 52478-80
OST 1 52478-80
Single-strand circular cutting tools for taper inch thread as per GOST 6111-52. Design and dimensions.
OST 1 76163-80
OST 1 76163-80
Devices for contact vacuum forming of volume parts made of oriented organic glass. Types and main parameters.
OST 1 76329-80
OST 1 76329-80
Flared pipe joints for manufacturing equipment. Technical requirements.
OST 1 76330-80
OST 1 76330-80
Flared ends of pipe. Design and dimensions.
OST 1 76339-80
OST 1 76339-80
symmetrical Screw Tees with taper thread. Design and dimensions.
OST 1 76347-80
OST 1 76347-80
Reducing sleeves. Design and dimensions.
OST 1 76353-80
OST 1 76353-80
Union crosses. Design and dimensions.
OST 1 76354-80
OST 1 76354-80
Symmetrical reducer type crosses. Design and dimensions.

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!