Documents by Year
1930s (86)
1940s (117)
1950s (2)
1960s (844)
1970s (20003)
1980s (20684)
1990s (2216)
2000s (520)
2010s (44)
2020s (1)
Other (744)

OST

OST 84-1880-80
OST 84-1880-80
Case back for desktop and wall clocks. Typical technological process.
OST 84-1881-80
OST 84-1881-80
Gear wheels of desktop and wall clocks. Typical technological process.
OST 84-1882-80
OST 84-1882-80
Axles of table and wall clocks. Typical technological process.
OST 84-1883-80
OST 84-1883-80
pinions desktop and wall clocks. Typical process.
OST 84-1884-80
OST 84-1884-80
Shoulder bushings for desktop and wall clocks. Group engineering process.
OST 84-1885-80
OST 84-1885-80
Digital signs of desktop and wall clocks. Typical technological process.
OST 84-1886-80
OST 84-1886-80
Minute hands for table clocks and wall clocks. Standard techniques and procedures.
OST 84-1887-80
OST 84-1887-80
Dials of table and wall clocks. Typical technological process.
OST 84-1888-80
OST 84-1888-80
Rectangular circuit boards for desk and wall clocks. Typical technological process.
OST 84-1889-80
OST 84-1889-80
Round circuit boards for desk and wall clocks. Typical technological process.
OST 84-1890-80
OST 84-1890-80
Rivets for desktop and wall clocks. Typical technological process.
OST 84-404-80
OST 84-404-80
Blanking dies. Working hard-alloyed parts. Typical technological process.
OST 84-411-80
OST 84-411-80
primed demolition blocks for commercial blasting. Specifications.
OST 84-466-80
OST 84-466-80
Dump valves. Design. Dimensions. Technical requirements.
OST 84-505-80
OST 84-505-80
Drawing dies. Hard-alloyed moulds. Design. Dimensions.
OST 88.0.022.200-80
OST 88.0.022.200-80
Electromechanical round copper wire of MM grade (restriction as per GOST 2112-71).
OST 88.0.022.201-80
OST 88.0.022.201-80
Uninsulated copper wire of ПЩ grade (restriction as per GOST 9125-59).
OST 88.0.022.210-80
OST 88.0.022.210-80
Copper wire of ПЭЛ grade, enameled with oily base varnish (restriction as per GOST 2773-69).
OST 88.0.022.225-80
OST 88.0.022.225-80
Thermally-resistant PTFE insulated installation wires of МГТФ and МГТФЭ grades (restriction as per ТУ16-505.185-71).
OST 88.0.022.230-80
OST 88.0.022.230-80
HV wires for ignition devices of ПВЛ-1 and ПВЛЭ-1, ПВЛ-2 and ПВЛЭ-2 grades (restriction as per GOST 3923-47).
OST 88.0.022.232-80
OST 88.0.022.232-80
Thermally resistant installation wire of ГФ grade (restriction as per ТУ16-505.191-71).
OST 88.0.022.233-80
OST 88.0.022.233-80
HV installation wire of МПВ-2 grade (restriction as per ТУ16-505.253-71).
OST 88.0.022.236-80
OST 88.0.022.236-80
PVC insulated installation wires of МГВ and МГВЭ grades (restriction as per ТУ16-06-463-70).
OST 88.0.022.241-80
OST 88.0.022.241-80
Cables for geophysical works of КОБД, КТБД, КОБДФ, КТО, КТШ, КТШН types (limitation under GOST 6020-68).
OST 88.0.022.242-80
OST 88.0.022.242-80
Ship rubber insulated cables of КНР и КНРЭ types (limitation under GOST 7866-67).
OST 88.0.022.243-80
OST 88.0.022.243-80
RF Cables (limitation under GOST 11326.1-71 - GOST 11326.46-71).
OST 88.0.022.244-80
OST 88.0.022.244-80
Control cables with rubber and plastic insulation of КРВГ type (limitation under GOST 1508-71).
OST 88.0.022.246-80
OST 88.0.022.246-80
Plastic insulated installation wires of АПВ, ПВ, ПГВ, АППВ and ППВ grades (restriction as per GOST 6323-71).
OST 88.0.022.247-80
OST 88.0.022.247-80
Compensating wire of ПКГВ grade (restriction ТУ16-06-280-68).
OST 88.0.022.248-80
OST 88.0.022.248-80
Flexible portable cable with rubber insulation of КРПТ (limitation under GOST 13497-68).
OST 88.0.022.249-80
OST 88.0.022.249-80
Power cables with rubber insulation of СРГ, ВРГ, АВРГ, НРГ and АНРГ types (limitation under GOST 433-58).
OST 88.0.022.250-80
OST 88.0.022.250-80
Power cables insulated with impregnated paper in lead sheath of СБГ and АСБГ types (limitation under GOST 340-59).
OST 88.0.022.255-80
OST 88.0.022.255-80
RF armoured borehole cable of KPK-2 type (limitation under Technical conditions КП 173-67).
OST 88.0.022.256-80
OST 88.0.022.256-80
7-cored armoured borehole cable of КСБ-8 type (limitation under Technical conditions 16-06.352-69).
OST 88.0.054.002-80
OST 88.0.054.002-80
Termination of cables and harnesses with screened wires. Typical technological process.
OST 88.0.091.108-80
OST 88.0.091.108-80
Standard system of the USSR Academy of Sciences. Devices for scientific researches and automation of experiment. Installation and maintenance.
OST 88.0.296.001-80
OST 88.0.296.001-80
Scientific and experiment automation instruments. Ventilation units. Design and dimensions. Technical requirements.
OST 88.0.410.002-80
OST 88.0.410.002-80
System of standardized structures. Upright frames. Types and basic dimensions. Technical specifications.
OST 88.0.500.002-80
OST 88.0.500.002-80
System of standardized structures. Structural frames. Types and principal dimensions.
OST 92-0006-80
OST 92-0006-80
Logistics’ support management
OST 92-0066-80
OST 92-0066-80
Organization of centralized interfactory transportation.
OST 92-0084-80
OST 92-0084-80
Basic compatibility standards of unspecified limit deviations of surface dimensions, forms and layout.
OST 92-0676-80
OST 92-0676-80
Primary measuring transducers for quick-changing pressure. Design and dimensions.
OST 92-0839-80
OST 92-0839-80
Multipoint sealed terminals. Construction and dimensions.
OST 92-0840-80
OST 92-0840-80
Multipoint sealed terminals. Technical requirements.
OST 92-0908-80
OST 92-0908-80
Solutions for hydraulic tests. Specifications.
OST 92-0935-80
OST 92-0935-80
Radio-electronic and electrotechnical equipment. The general requirements to packing, transportation and storage.
OST 92-0940-80
OST 92-0940-80
Metals. Method for determination of fracture using bending test with various strain rates at different temperatures.

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power Industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!