Documents by Year

1930s (86)

1940s (117)

1950s (2)

1960s (844)

1970s (19991)

1980s (20680)

1990s (2216)

2000s (517)

2010s (44)

2020s (1)

2020 (1)

OST

1968

«
1
2
3
4
5
6
…
10
»

OST 23.5.705-68

All-cast steel bottom round Flasks with diameter of 1000 mm, H = 200 and 300 mm. Design and dimensions.

OST 23.5.706-68

All cast upper flasks with clear diameter l1000mm, H = 200 and 300 mm. Design and dimensions.

OST 23.5.707-68

All-cast steel rectangular bottom casting mould boxes with clear dimensions: L = 1300 and 1400 mm, B = 800 and 1000 mm, H = 200-500 mm. Design and dimensions.

OST 23.5.708-68

All-cast steel rectangular moulding box with clear dimensions: L = 1300 and 1400 mm, B = 800 and 1000 mm, H = 200-500 mm. Design and dimensions.

OST 23.5.709-68

Solid rectangular steel casting lower moulding boxes with clear dimensions : L = 900 mm and 1 000, B = 600 mm, H = 150-300 mm for moulding machine 703. The construction and dimensions.

OST 23.5.710-68

All-cast steel upper rectangular moulding box with clear dimensions: L = 900 to 1000 mm, B = 600 mm, H = 150-300 mm for moulding machine 703. The construction and dimensions.

OST 23.5.711-68

Solid steel casting lower rectangular moulding boxes with reduced spacing and clear dimensions of: L = 900 mm and 1 000, B = 580 mm and 600 mm, H = 150-300 mm for moulding machine 703. The construction and dimensions.

OST 23.5.712-68

All-cast steel upper rectangular moulding box with reduced centre-to-centre and clear dimensions: L = 900 mm and 1000, B = 580 mm and 600 mm, H = 150-300 mm for moulding machine 703. The construction and dimensions.

OST 23.5.713-68

Lower all-cast steel round flasks with clear dimensions: D = 800 and 880 mm, H = 200 and 250 mm at a moulding machine 703. The construction and dimensions.

OST 23.5.714-68

All cast upper casting flasks with clear dimensions: D = 800 and 880 mm, H = 200 and 250 mm for moulding machine 703. The construction and dimensions.

OST 23.5.715-68

All-cast steel rectangular moulding box with clear dimensions 380x380 mm, height 25 mm for forming t piston rings. Design and dimensions.

OST 23.5.716-68

Solid steel foundry moulding boxes. Assembling guiding pins for one-man flasks. Design and dimensions.

OST 23.5.717-68

Solid steel foundry moulding boxes. Assembling guiding pins for one-man flasks. Design and dimensions.

OST 23.5.718-68

Solid steel foundry moulding boxes. Assembling guiding pins crane flasks. Design and dimensions.

OST 23.5.719-68

Solid steel foundry moulding boxes. Assembling guiding pins for crane flasks. Design and dimensions.

OST 23.5.720-68

Solid steel foundry moulding boxes. Pin bush Design and dimensions.

OST 23.5.721-68

Solid steel foundry moulding boxes. Pin bushes. Design and dimensions.

OST 23.5.722-68

Solid steel foundry moulding boxes. Alloy bracket. Design and dimensions.

OST 23.5.723-68

Solid steel foundry moulding boxes. Technical requirements.

Dies for cold stamping. Stationary hooked stops. Design and dimensions.

Dies for cold stamping. Buried stops with the rod. Design and dimensions.

Dies for cold stamping. Buried stops. Design and dimensions.

Dies for cold stamping. Buried stops with a torsion spring. Design and dimensions.

Dies for cold stamping. Semi-automatic stops. Design and dimensions.

Dies for cold stamping. Semi-automatic stops. Design and dimensions.

Dies for cold stamping. Clips. Design and dimensions.

Dies for cold stamping. Side block clips. Design and dimensions.

Dies for cold stamping. Side block clips. Design and dimensions.

Dies for cold stamping. Roller clips. Design and dimensions.

Dies for cold stamping. V-shaped one side clips. Design and dimensions.

Dies for cold stamping. Side clips for material with thickness over 3 mm.. Design and dimensions.

Dies for cold stamping. Floating clips. Design and dimensions.

Dies for cold stamping. Ejectors. Design and dimensions.

Dies for cold stamping. Traverses. Design and dimensions.

Dies for cold stamping. Traverses. Design and dimensions.

Dies for cold stamping. Upper and lower rod pushers. Design and dimensions.

Dies for cold stamping. Guide bushings for pushrods. Design and dimensions.

Dies for cold stamping. Rod threaded limiters of die shut height. Design and dimensions.

Dies for cold stamping. Prismatic limiters of die shut height. Design and dimensions.

Dies for cold stamping. Stops with diameter up to 10 mm. Design and dimensions.

Dies for cold stamping. Stops with diameter from 10 up to 50 mm. Design and dimensions.

Dies for cold stamping. Stops with diameter up to 12 mm. Design and dimensions.

Dies for cold stamping. Stops with diameter from 12 up to 50 mm. Design and dimensions.

Dies for cold stamping. Overrunning stop cutting blades. Design and dimensions.

Dies for cold stamping. Overrunning stop cutting blades. Design and dimensions.

Dies for cold stamping. Pressed in scrap cutters. Design and dimensions.

Dies for cold stamping. Scrap cutters. Design and dimensions.

Dies for cold stamping. Stepper blade stops. Design and dimensions.

«
1
2
3
4
5
6
…
10
»

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!