Documents by Year

1930s (86)

1940s (117)

1950s (2)

1960s (844)

1970s (19991)

1980s (20680)

1990s (2216)

2000s (517)

2010s (44)

2020s (1)

2020 (1)

OST

1981

«
1
2
3
4
5
…
52
»

Welded rings from steel of 12Х25Н16Г7АР and 12Х25Н16Г7АР-Ш types made of hot-rolled and moulded profiles.

Welded rings from steel of 14X17H2 type made of hot-rolled and moulded profiles.

Welded rings from steel of 37Х12Н8Г8МФБ and 37Х12Н8Г8МФБ-Ш types made of hot-rolled and moulded profiles.

Welded rings from steel of 1Х12Н20Т2 type made of hot-rolled and moulded profiles.

Welded rings from steel of 13Х11Н2В2МФ-Ш type made of hot-rolled and moulded profiles.

Welded rings from steel of 11Х11Н2В2МФ-Ш type made of hot-rolled and moulded profiles.

Pressed sections of 01420 grade aluminium alloys.

Stampings made of Aluminium alloy. Grade 1420.

Titanium alloys. Acceptance regulations. Chemical composition inspection.

Stampings and forgings made of Aluminium alloy. Grade 1201.

Adhesives. Method of testing adhesive compounds of ablator with metal for tearing off.

Unprofiled welded rings made of steel. Type 20. Technical requirements.

Unprofiled welded rings made of steel. Х12НМБФ-Ш (ЭП609-Ш) type. Technical requirements.

Welded rings from alloy. ХН50ВМТЮБ-ВИ (ЭП648-ВИ) type made of hot-rolled and moulded profiles. Technical requirements.

Welded rings from alloy. ХН62ВМЮТ-ВД (ЭП708-ВД) type made of hot-rolled and moulded profiles. Technical requirements.

Unprofiled welded rings made of steel of 11Х11Н2В2МФ-Ш (ЭИ962-Ш) type. Technical requirements.

Occupational safety standards system. Work with glass materials. General safety requirements.

Unprofiled welded rings made of sheets and plates of titanium alloy of OT4 type. Technical requirements.

Unprofiled welded rings made of sheets and plates of titanium alloy of OT4-1 type. Technical requirements.

Unprofiled welded rings made of sheets and plates of titanium alloy of BT5-1 type. Technical requirements.

Unprofiled welded rings made of sheets and plates of titanium alloy of BT20 type. Technical requirements.

Pressed sections of steels and alloys for welding rings. Specifications.

Occupational safety standards system. Pressure vessels. Installation and operation in industrial facilities. Safety requirements.

SSBT. Works on glass materials. General safety requirements

SSBT. Pressure vessels. Installation and operation in industrial premises

Thread exit. Runaways, undercuts, undercuts, grooves and chamfers

Airplane electrical machines. Method of calculating the quantitative indicators of dependability.

Industry-based uniformity measurement system. Automated measurement assurance system. General provisions.

Main combustion chambers of gas turbine engines. Methods of processing the results of field measurements of gas temperature.

Gas turbine engines. General requirements for the supply of tests in the thermal chamber

Review of standardization and unification level of component part designs for aircraft, engines and means of their grounding servicing. Procedure and rules.

Aircraft and helicopter interior lightning. General requirements.

Cockpit alarm system of aircrafts and helicopters. General requirements.

Three-stage float gyroscopes for inertial aircraft systems. Terms and Definitions

Industry-based uniformity measurement system. Technique and tools for defining of dynamic characteristics of gas flow temperature sensors.

The cabin of the helicopter with one pilot. Requirements for the placement of main and emergency controls

Helicopter cockpits for two pilots sitting together or for a pilot and an operator. Requirements for the placement of main and emergency controls.

Industry-based uniformity measurement system. Presentation of the results of verification and instrument calibration.

Industry-based uniformity measurement system. Procedure for works conducting of metrological assurance of test equipment.

Order of design documentation transfer for aircraft on-board devices from design company to production company.

Industry-based uniformity measurement system. Unstandardized measuring instruments. Requirements to compilation of programs of institutional tests and metrological certification.

Industry-based uniformity measurement system. Metrological assurance of production preparation. General provisions.

Industry-based uniformity measurement system. Registry list for unstandardized measuring equipment.

Sectoral uniformity measurement system. Passport for non-standard measuring instruments

Aircraft weight characteristics. Terms and definitions.

Allowances for dimensions from 1 to 3150 mm for plastic parts.

Industry-based uniformity measurement system. Metrological inspection of standard projects. Arrangement and procedure.

Means for monitoring the technical condition of aircraft products. Method of determining the characteristics of instrumental reliability of control

«
1
2
3
4
5
…
52
»

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!