Documents by Year

1960s (14)

1970s (456)

1980s (2039)

1990s (1670)

2000s (1369)

2010s (384)

2020s (16)

2020 (16)

RD

Recommended Practice for Optimum Selection of the Type, Quantity, and Location of Windbreaks on Floating Docks

Model Regulations for the Department of Hydrotechnical and Engineering Structures of the MMF Sea Port

RD 33-3.5-01-83

Cultivation and agricultural use of reclaimed mineral lands

RD 33-5.3.01-83

Systemor the calculation of the loss caused to the state by the violation of legislation concerning waterways.

Price: $191.22

RD 34.01.301-83

Methodical instructions. The introduction of a unified system for designating products and design documents and the ESKD classifier and maintaining the ESKD classifier at enterprises and organizations of the USSR Ministry of Energy

RD 34.10.312-83

Typical norms for the consumption of energy columns and special reinforced concrete for repair of overhead lines and MTP 0.4 - 20 kV

RD 34.10.386-83

Methods of rationing the consumption of materials for repair and maintenance of electrical networks

RD 34.20.401-83

Rules of acceptance for operation of power facilities of power plants, electrical and heat networks after technical re-equipment

Price: $225.72

RD 34.20.511-83

Guidelines for smelting ice with alternating current. Part I. By direct current

RD 34.26.713-83

Standard Output Characteristic of Hot Water Boiler KVGM 100 When Burning Fuel Oil

RD 34.37.504-83

Quality Standards for Feed Water and System Water of Piped Heat Distribution Systems

Price: $195.03

RD 34.37.504-83 (NR 34-70-051-83)

Standards of make-up and heating networks delivery water quality.

Price: $346.23

RD 34.37.505-83

Methodological guidelines for network path silicate make-up treatment at CHP plant.

Price: $304.92

RD 34.37.509-83

Method for the determination of carbon dioxide in ammonia solutions

Price: $85.14

RD 34.47.608-83

Manual overhaul of RND-2-500 disconnector

RD 37.001.012-83

Quality control of rubber automotive parts. Control means.

RD 38.18.001-83

Instructions for radiographic profile thickness of technological pipelines

RD 38.19.003-83

General guidelines for centralized repair. Pumps.

RD 39-12-960-83

Elevators and bails non-destructive testing methods.

The behavior of repair and insulation works in wells. Technology off the upper layers containing the opening of the crack plugging

Instructions for well killing technology with simultaneous processing of the bottom zone of the reservoir

RD 39-23-954-83

Process Guidelines for Removal of Paraffin Deposits Using Benzene Components

Directional Drilling Instructions

Instruction for tapered threaded joints of downhole motors

Methods of consumption standards and the needs of technical means for electric drilling

Method for selecting gaslift well operation modes in conditions of shortage of working agent

Guidelines for the Prevention of Drilling Accidents

RD 39-30-857-83

Methodological guidelines for the justification and selection of models for hydraulic and thermal calculations of pipelines

RD 39-30-859-83

Rules for testing the linear part of existing trunk pipelines

RD 39-30-873-83

Key provisions for the development and implementation of technology for centralized maintenance and repair of infield pipelines

RD 39-30-898-83

Instructions for the study of oils and oil emulsions in order to provide initial data for the design of oil treatment plants

RD 39-30-902-83

Current individual balance norms and standards for water consumption and water disposal at pumping stations and oil depots of Glavtransneft MNP

RD 39-30-923-83

Method for assessing the aftereffect of film-forming inhibitors in hydrogen sulfide-containing mineralized media

RD 39-30-925-83

Procedural Guidelines for Biological Remediation of Lands Disturbed During the Production, Treatment, and Transportation of Crude Oil

RD 39-30-968-83

Instructions for the repair of pipelines and tanks using polymer adhesive compositions

RD 39-30-979-83

Method for determining the requirements for hydraulic supports

RD 39-30-980-83

Methodology for determining the requirements for pipe layers

The order of collection, sale, use and accounting of secondary raw materials in the Ministry of Petroleum Industry

Test procedure for bactericidal activity of reagents with different solubility in water

Instructions for analysis, automated preparation, calculation and output of research data on reservoir oils and gases

Methods of calculating the rate of consumption of sucker rod pumps

Technology of selective plugging of watered zones in deep wells

Instructions for use of the corrosion inhibitor ANP-2M for the protection of pipelines of a system for collecting waterlogged oil

Standard provision for a laboratory that performs oil analyzes during acceptance operations and produced water

Pressure transfer tables to be applied in the collection, preparation and transportation of oil

Organization, acquisition and use of reference and information funds in research institutes, design bureaus of the oil industry (guidelines)

Methodology for determining the requirements for small-sized preventive installations for well repair

Guidelines for organizing the collection and rational use of spent petroleum products at enterprises of the Ministry of Oil and Gas Industry

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!